Elite CSW200 Manual - Fast Access Security Corp.

More documents

Recommendations

Info

Attention: To connect loop detectors, refer to page 25 and 26. 4' 4' IN Important Open End of Gate Loop Perimeter 10 feet to 13 feet 14 feet to 26 feet 27 feet to 45 feet 46 feet to 100 feet 101 feet and up EXIT LOOP SYSTEM Allows gate to automatically open for exiting vehicles. Exit Loop 4' Number of Turns 5 4 3 2 1 The wire is continuously wound in the loop saw slot for the required number of turns. One turn shown. (Refer to table above) Remove sharp inside corners by making corner cuts 4' 4' 4' 1/8" to 1/4" Saw Slot 4' 4' Home Run Road Surface Sealant Loop Wire (3 Wires Shown, amount varies. Refer to table) Home Run OUT 1/8" to 1/4" Saw Slot Recommended Loop Wire XLPE 12-18 gauge USE 12-18 gauge Use heavier wire gauge for a more durable loop area Min 1" The wire must be twisted together 6 twists per foot from the end of the loop to the loop detector connection. 29
30 1 2 3 Unscrew Bolt Special tool required for the “optional” security bolt Lift Off Cover EMERGENCY RELEASE Loosen Red Handle Gate can now be manually moved Grab the Gate to Make Adjustments Tighten the Red Handle, Replace the Cover and Bolt when Finished When the power is restored, the gate will readjust itself automatically.
Page 1 and 2: Click on the desired topic in the
Page 3 and 4: 2 UL LISTINGS AND INSTRUCTIONS INST
Page 5 and 6: 4 UL LISTINGS AND INSTRUCTIONS IMPO
Page 7 and 8: 6 ROLE OF SPECIFIERS AND DESIGNERS
Page 9 and 10: 8 W ARNINGS AND PRECAUTIONS The CSW
Page 11 and 12: 10 CONCRETE PAD AND GATE ARM ATTACH
Page 13 and 14: 12 26.5" COMPACT INSTALLATION Compa
Page 15 and 16: 14 ADJUSTMENT OF OUTPUT SHAFT Fit P
Page 17 and 18: 16 HOW TO CONNECT POWER (120V) W4 O
Page 19 and 20: 18 TWO-WAY ADJUSTABLE REVERSING SEN
Page 21 and 22: 20 CENTER SAFETY EXIT W4 G B A MS L
Page 23 and 24: 22 SOLENOID CONNECTION WITH OPTIONA
Page 25 and 26: 24 HOUSE ALARM/PROXIMITY SWITCH CON
Page 27 and 28: 26 SURGE SUPPRESSOR TERMINAL INPUT
Page 29: 28 Allows gate to stay open when ve
Page 33 and 34: 32 Bolt-On Motor and Pulley #3 - N.
Page 35 and 36: 34 CENTER SAFETY EXIT W4 G B A MS L
Page 37 and 38: 36 OVERLOAD LED ON And POWER LED OF
Page 39 and 40: 38 Q018 Q025 DM / 1 HP Cover Q247 U

Elite CSW200 Manual - Fast Access Security Corp.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?