SI Series Container Carrier Manual - Stellar Industries, Inc.
SI Series Container Carrier Manual - Stellar Industries, Inc.
SI Series Container Carrier Manual - Stellar Industries, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
iv <strong>Container</strong> <strong>Carrier</strong> Owner’s <strong>Manual</strong><br />
** 60” cab--to--axle minimum<br />
is possible with reduced<br />
capacity rating.<br />
<strong>Container</strong> <strong>Carrier</strong> Specifications<br />
**84” Minimum<br />
Cab--to--Axle<br />
(Recommended)<br />
32”<br />
Aft of Axle<br />
Chassis<br />
GVW Rating<br />
of 30,000 lbs.<br />
or more is<br />
recommended<br />
Clearance Height:<br />
10” Minimum Fork Tip<br />
186” Maximum Mast Top<br />
Capacity: 2 through 10 cubic yard containers.<br />
Fork Lift Height: 10” Minimum, 186” Maximum.<br />
Mounting Frame: 27.75” Inside, 33.75” Outside.<br />
Valve: 20 GPM<br />
Forks: 1-1/4” T-1 High Strength Alloy Plate<br />
Lift Cylinders: Two 4” Bore x 29” Stroke, Two 4” Bore x 32” Stroke<br />
Hydraulic Tank: 10 Gallon Capacity.<br />
Controls: Inside Cab Cable Controls Standard<br />
Pivot Points: Permanently Lubricated and Greasable Bushings<br />
Lift Capacity: 8,000 lbs.<br />
Grease Fittings: At All Wear Points.<br />
Pump: 11 GPM<br />
Filter: 200 Mesh, In-tank Suction Strainer 25 Micron, return filter.<br />
Operating Pressure: 1,200 P<strong>SI</strong>.<br />
<strong>Container</strong> Bumpers:<br />
Rear Load <strong>Container</strong> Attachment<br />
Molded Rubber.<br />
Rotator Capacity: 8,000 lbs.