AMPLI-TUNER/LECTEUR CD RECEIVER/CD PLAYER - Prostage

■ Tuner
FM
AM
Problem Cause Remedy
FM stereo reception is
noisy.
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
The desired station
cannot be tuned into
with the automatic
tuning method.
Previously preset
stations can no longer
be tuned into.
The desired station
cannot be tuned into
with the automatic
tuning method.
There are continuous
crackling and hissing
noises.
There are buzzing and
whining noises.
The characteristics of FM stereo
broadcasts may cause this problem
when the transmitter is too far away or
the antenna input is poor.
Troubleshooting
See
page
Check the antenna connections. 14
Try using a high-quality directional FM
antenna.
Use the manual tuning method. 26
There is multi-path interference. Adjust the antenna position to eliminate
multi-path interference.
The signal is too weak. Use a high-quality directional FM antenna. —
The receiver has been disconnected for
a long period.
The signal is weak or the antenna
connections are loose.
Noises result from lightning,
fluorescent lamps, motors, thermostats
and other electrical equipment.
Use the manual tuning method. 26
Set preset stations 27
Tighten the AM loop antenna connections
and orient it for the best reception.
Use the manual tuning method. 26
Use an outdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
A TV set is being used nearby. Move the receiver away from the TV set. —
—
—
14
—
39 En
ADDITIONAL
INFORMATION
English