“DIAMANT” Special Products - DIAMANT Metallplastic GmbH

®
ultra
metal
Rapid
UltraMetal Rapid is a cold curing 2-component polymer metal which combines the advantages of the
Ultrametal products with a very short cure time. It is filled with mineral combinations. Main fields of
application are emergency repairs requiring a fast cure. For convenience the mixing ratio of UltraMetal
Rapid is 1:1 by weight or volume. A twin injector is available.
Due to special additives UltraMetal Rapid can be applied directly onto oily, greasy or gasoline-soiled
surfaces. Leakages under moderate pressure can be sealed on ground of the rapid curing time.
Technical Data
Consistency paste
Mixing ratio Resin/Hardener Weight 1:1
Mixing ratio Resin/Hardener Volume 1:1
Specific weight g / cm 3
1,5
Pot life 20°C /min. 3
Curing time 20°C / h 0,5 (light
load)
1,0 (full load)
Compressive strength N/mm² 155
Bending strength N/mm² 79
Tensile strength N/mm² 60
Hardness Shore D after 48 h 86
Temperature resistance °C -30/+100
Colour Grey
Shelf life Month ~ 12
Pressure Test by Lloyds on dry, wet and oily surfaces:
Adhesion
Surface
Thickness
d
(mm)
Curing time
(h)
Test Material: UltraMetal
Base material: R ST 37 – 2
Adhesion surface: grit blasted,
dry / wet / oily
Temperature: RT & 60°C
Curing temperature max. pressure
P (bar)
dry 10 6 RT > 250
wet 10 6 RT > 150
oily 10 6 RT > 100
oily 10 6 60°C > 150
oily 10 24 60°C > 120
Quality Engineering
Quality planing, construction supervision, testing,
QA/QC manuals, commissioning
Blohm+ Voss AG
Abteilung TQ 14
Hermann-Blohm-Straße 3
2000 Hamburg 11
-16-