Here Comes Santa - Quilt-n-Bee

More documents

Recommendations

Info

Fabrics from the Here Comes Santa collection (Style #4275) by Arlene Neely for Red Rooster Fabrics. Fabric reQuirements: A. Pattern #23308 – MUL1 ...............................................................1 panel B. Pattern #23309 – GRE1 ................................................................ 1 /8 yard C. Pattern #23311 – TAN1................................................................ 1 /4 yard D. Pattern #23312 – GRE1 ................................................................ 1 /4 yard E. Pattern #23312 – LTGRE1............................................................ 1 /8 yard F. Pattern #23312 – RED1 ............................................................ 1 3 /8 yards G. Pattern #23313 – LCREGRE1 ...................................................... 1 /3 yard H. Pattern #23313 – LCRERED1 ...................................................... 1 /2 yard I. Pattern #23314 – RED1 ................................................................ 1 /2 yard J. Pattern #23315 – RED1 ................................................................ 1 /4 yard K. Pattern #23315 – GRE1 ................................................................ 1 /8 yard Backing ..............................................................................................2 2 /3 yards Batting ...............................................................................................46" x 64" Template plastic cutting instructions: Please read all instructions carefully before beginning. 1 /4" seam allowance is included in measurements and all strips are cut across the width of the fabric unless noted otherwise. Label pieces and keep together until ready to sew. Cut fabrics in order given. These instructions are based on unwashed fabrics. A. Pattern #23308 – MUL1 (panel): 1. Fussy-cut four medium Santa blocks to 8 1 /4" x 10 1 /4". 2. Fussy-cut the large Santa to 11 1 /2" x 16 1 /2". 3. Fussy-cut four little Santa heads to 4 3 /4" x 4 3 /4". B. Pattern #23309 – GRE1 (double border): 1. Cut four template H for trees. note: Trees will be raw-edged stitched. C. Pattern #23311 – TAN1 (small toss): 1. Cut sixteen 2 1 /2" squares, four for each of the four medium Santa blocks. Piecing instructions: A. Large Santa block 1. Sew one F strip, 3 /4" x 16 1 /2", to each side of large Santa block. Press. 2. Sew one F strip, 3 /4" x 12", to the top and bottom of large Santa block. Press (Block 5). B. Medium Santa blocks 1. Sew templates E and F together. Press. Attach template D and press (Figure 1). Attach EFD strip to each side of the four medium Santa blocks. 2. Referring to Figure 1, sew templates B and C together. Press. Attach template A and press. 3. Add a 2 1 /2" C square to each end of the ABC strips. Press. Attach a strip to the top and bottom of the four medium Santa blocks (Figure 2). Press. (Blocks 1, 3, 7, 9) C. Tree blocks 1. Blocks 4 and 6: Referring to quilt photo, arrange four Template H pieces from a variety of fabrics and one 1 /4" x 6 1 /4" trunk piece on a 8" x 16" G rectangle. Baste or glue-baste in place. Stitch a scant 1 /8" away from the raw edge of each piece. Make two. 2. Blocks 2 and 8: Follow the directions for tree Blocks 4 and 6 to make tree Blocks 2 and 8. Place the H pieces and a 1 /4" x 4 1 /2" E tree trunk piece on a 3 1 /2" x 14 1 /4" H rectangle for each tree block. Stitch in place. E F E E F Figure 1 Make 8. Letters refer to templates. E F D D E Template C C C Template A Template B Template F Template D Template E A2 Figure 2 Make 4. F D. Pattern #23312 – GRE1 (trees): 1. Cut twelve template H for trees. E. Pattern #23312 – LTGRE1 (trees): 1. Cut two template H for trees. 2. Cut two 1 /4" x 4 1 /2" for short tree trunks. 3. Cut four 1 /4" x 6 1 /4" for long tree trunks. F. Pattern #23312 – RED1 (trees): 1. Cut four 2 1 /2" x length of fabric strips for binding. 2. Cut two 4 3 /4" x 46 1 /2" length of fabric strips for side borders. 3. Cut two 4 3 /4" x 28" strips for top and bottom borders. 4. Cut two 3 /4" x 16 1 /2" strips for large Santa block. 5. Cut two 3 /4" x 12" strips for large Santa block. G. Pattern #23313 – LCREGRE1 (snowflakes): 1. Cut two 8" x 16" rectangles for two tree blocks. H. Pattern #23313 – LCRERED1 (snowflakes): 1. Cut eight each of templates F and C, two for each of the medium Santa blocks. 2. Cut two 3 1 /2" x 14 1 /4" rectangles for two tree blocks. I. Pattern #23314 – RED1 (snowman toss): 1. Cut eight each of templates A, B, D, and E, two for each of the medium Santa blocks. J. Pattern #23315– RED1 (stripe): 1. Cut six strips 1" x WOF". Sew together on the diagonal. Subcut into four 1" x 27" strips and two 1" x 46 1 /2" strips. K. Pattern #23315 – GRE1 (stripe): 1. Cut six H tempates for trees. Quilt assembly: Refer to Quilt Diagram. 1. Sew Blocks 1, 2 and 3 together for Row 1. Press. 2. Sew Blocks 4, 5 and 6 together for Row 2. Press. 3. Sew Blocks, 7, 8 and 9 together for Row 3. Press. 4. Sew a 1" x 27" J strip to the top and bottom of Rows 1 and 3. Press. 5. Sew Rows 1, 2 and 3 together. Press. 6. Sew a 1" x 46 1 /2" J strip to the sides of the quilt center. Press. 7. Sew a 4 3 /4" x 46 1 /2" F strip to the sides of the quilt. Press. 8. Sew a 4 3 /4" square Santa head to the ends of each 4 3 /4" x 28" F strip. Press. Sew strips to top and bottom of quilt. Finishing: 1. Prepare backing to measure 46" x 64". 2. Layer quilt top, batting and backing. Baste layers together. 3. Quilt as desired. 4. Trim layers even with quilt top. 5. Sew binding strips together with diagonal seams. Press seams open. Sew binding to quilt using your favorite method. Christmas Tree Template H 100% No seam allowance added.
Top & Bottom Template C 100% Top & Bottom Template A 100% Top & Bottom Template B 100% Side Template D 100% Scale Check for pdf files When you print these templates, this ruler should measure 2 inches long. If it does not, change, “page scaling” to “none” in the print dialog box. 0" 1" 2" Side Template E 100% Side Template F 100%
Page 1: www.redroosterfabrics.com by Arlene

Here Comes Santa - Quilt-n-Bee

Create successful ePaper yourself

Delete template?

Save as template?