Fendt 900 Vario - AGCO GmbH

Standard with ange PTO
The 900 Vario is tted with a ange PTO as standard. When
required, you can switch between di erent PTO pro les easily and
in a relatively short amount of time.
Save yourself unnecessary steps
External actuation of the linkage and rear PTO controls are available
for the 900 Vario. Mount rear implements easily and save yourself
unnecessary steps, for example, when lling the slurry tank or
mounting and removing implements.
Powerful drives at the front and rear
Optional front PTO with excellent e ciency
The 1000-rpm front PTO on the 900 Vario is driven directly from
the engine crankshaft. This allows you to pro t from its exceptionally
favourable e ciency.
Never endanger the drive shaft again
Concentrate on the essentials at the headlands. The standardequipped
PTO automatic mode engages and disengages the PTO
as soon as you lower or raise the implement.
You will appreciate the operating comfort
of the 900 Vario, in particular for tillage
applications, where you often must operate
the PTO controls in addition to the linkage
controls. It offers you extensive, highquality
PTO management with start-up
control.
Two-speed PTO as standard
The PTO engagement control has 2-speed
preselection. It is conveniently operated with a
membrane keypad on the Variocentre. The 900
Vario comes with the PTO speeds 750 rpm und
1000 rpm at the rear as standard. The „540E“
economy PTO with 750 rpm enables fuel-saving
work with implements that are designed for
540 rpm. A 1000/1000E combination is also
available. It allows 1000-rpm PTO implements
to be run at a reduced speed, which optimises
24