The New - FESTOOL
The New - FESTOOL
The New - FESTOOL
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30° for easier guidance<br />
When routing with the side stop or the guide rail, the guide<br />
rods of the OF 2200 are offset by 30°. This means that the<br />
working position and advance direction are perfectly aligned.<br />
A lot easier in difficult material and for long periods of routing.<br />
Use of the side stop.<br />
Easily secured: the side and guide stop<br />
Clamping of the two guide rods to the base plate and<br />
the stop requires only one clamping screw - real time<br />
saving. <strong>The</strong> ergonomically aligned stops also optimise<br />
the application pressure on the workpiece.<br />
Control elements within reach<br />
<strong>The</strong> important control elements such as double column<br />
clamp, On-Off switch and the extraction ring trigger can be<br />
operated conveniently – without having to let go of the<br />
router. This means that both hands remain on the machine<br />
during the work operation. This is comfortable and increases<br />
safety.<br />
1.<br />
Everything under<br />
control:<br />
3.<br />
2.<br />
1. Double column clamp<br />
Simply turn to lock the routing<br />
height at both guide columns.<br />
<strong>The</strong> router does not twist even if<br />
strong forces are applied.<br />
2. On-Off switch<br />
Both hands remain firmly on the<br />
router when switching on or off –<br />
for more safety.<br />
3. Extraction ring trigger<br />
Both hands remain on the router<br />
when the extraction ring is<br />
triggered.<br />
7