Supplies Catalogue 2006/2007, (pdf; 4,27 MB) - Gerstel

GERSTEL ® MultiPurpose Sampler, MPS 2
Part No.
The GERSTEL MultiPurpose Sampler,
MPS 2 is a highly flexible and productive
autosampler and sample preparation robot
for GC and GC/MS analysis. The MPS 2
can automate everything from sample
preparation to sample introduction. The
MPS 2 is easily adapted to both new
and existing instruments. The system is
installed on top of the GC, saving valuable
bench space, and is compatible with all
standard laboratory GC systems.
GERSTEL MASter Software enables
integrated control of the MPS 2 and a
GC or GC-MS system from one method
and one integrated sequence list through
the Agilent ® Technologies ChemStation
Software.
The GERSTEL MPS PrepStation is a
dual-rail/dual robot configuration of the
MPS 2 MultiPurpose Sampler.
The PrepStation performs fully
automated sample preparation and
sample introduction. One MPS rail of
the MPS PrepStation is an automated
liquid sample handler that performs
a wide range of sample preparation
functions. The second MPS rail enables
many automated sample introduction
options, including Headspace and SPME
depending upon the selected MPS 2
hardware configuration.
The GERSTEL PrepBuilder Software
enables overlapping sample preparation
and GC analysis. While GC separation
is in progress, the next sample is being
prepared for analysis ensuring maximum
productivity.
Automated sample preparation
steps include:
• Dilution
• Derivatization
• Heating
• Rinsing
• Liquid-liquid extraction
• Standard addition
• Spiking
• Agitation
Automated sample introduction using a
wide range of selectable techniques:
• Standard liquid injection
• Large-volume liquid injection
• Headspace
• SPME
• Twister ® Option
• Twister back-extraction
• Membrane assisted solvent extraction
Other techniques can be automated using
the MPS 2 with special adaptations.
MPS 2
30