downloading this information - GEA Farm Technologies

NEW
The iNTELJET system consists of an electronic timer, collection vessel and
air injector valve. The assembly is connected to the end of the 4” milkline.
During washing, water is drawn into the collection vessel from the jetter
line. Periodically the injector valve is opened which propels the washing
solution from the collector down the milkline to the milk receiver. As the
solution is propelled down the milkline, a slug is formed which scrubs the
milkline for maximum plant hygiene. The slug creates added turbulence
in the receiver ensuring a thorough clean. The iNTELJET is Interactive
capable. The unit is automatically initiated in Wash Mode if installed with
other Interactive units such as the iNTELPUMP, iNTELFLOW or iNTELWASH.
Key Features
◼ Suits 4” Milklines
◼ Cleans line with washing slug
◼ Interactive capable
◼ 150mm diameter collection
vessel
◼ Fully automatic operation
3 Way Diverter Valve
The 3 Way Diverter Valve is a simple but effective
control device for liquids. The configuration consists
of two butterfly valves controlled by a double
acting pneumatic ram.
The diverter valve can be used for any installation
where liquids need to be controlled. This may be for
recirculation of wash water, diverting calf milk, or
controlling the filling of multiple bulk milk tanks.
Key Features
◼ Positive control of liquids
◼ Multiple uses
◼ Controlled by double acting ram
◼ Robust and can handle pressures of milk delivery lines
◼ Safe handling of high temperature and corrosive fluids
MILKING
COMPONENTS
Valve Diverting Open
Valve Diverter Closed
iNTELJET | 3 Way Diverter Valve
SECTION 9.25