HIDIS ¥‹¿Â√÷¡æ - Gobizkorea

Polycarboxilic Acid Type
Dispersing Agent _
HIDIS 40(N)&45
HIDIS 40 is sodium salt of poly (acrylic acid) and HIDIS
45 is ammonium salt of poly (acrylic acid) type highmolecular
dispersant designed for use as a pigment
dispersing agent.
Both give high efficiency in dispersing of titanium
dioxide, calcium carbonate and other extenders into
water and also in lowering the viscosity.
Advantages
HIDIS 40 and HIDIS 45 are versatile dispersants which
provide easy dispersion, and water resistance of emulsion
paints.
HIDIS 40 and HIDIS 45 markedly lower the viscosity of mill
base when pigment grinding.
HIDIS 40 and HIDIS 45 are recommended as dispersants of
semi-gloss paints, sheen paints and flat paints, providing
good stability of viscosity.
HIDIS 40 and HIDIS 45 provide anti-setting of pigments and
no flocculation of pigments in emulsion paints for long
term storage.
HIDIS 40 and HIDIS 45 provide good efficiency of grinding
using small dispersant amounts.
Physical Properties
Properties HIDIS 40 HIDIS 40N HIDIS 45
Appearance
Safety and Handling
HIDIS 40 and HIDIS 45 are slightly irritating to the skin and
eyes, and contact with these areas should be avoided. When
handling wear impervious rubber gloves and
goggles/facemask.
For handling/operation where possible contact may occur, a
safety shower and eyewash station should be available.
Further detailed information can be found in the MSDS
documentation. Store in a closed container at 5-40 .
Packing
220kg plastic drum
22kg plastic vessel
Amber color clear Amber color clear Amber color clear
Solid Contents (%) 39-41 44-46 44-46
Viscosity (at 25 ) 100-300cps 200-500cps 100-300cps
pH 7.0-9.0 7.5-8.0 6.0-80
Sp/Gr (25 /4 ) 1.25-1.35 1.30-1.40 1.15-1.25
Solubility in water Readily soluble Readily soluble Readily soluble
Ionic charge Anionic Anionic Anionic
Dosages
It is recommended to use about 0.4-0.6% wt. of HIDIS 40
based on dry pigments.
HIDIS 45 is more effective than HIDIS 40.
0.3-0.5% wt. of HIDIS 45 based on dry pigments is
recommended.

Exterior Flat paint based on HIQUE 332
Components Control 330 FV7380
Grind :
Deinoized water 120 120
HIDIS 40 2 2
Triton CF10 1 1
HIPOP 380 2 2
Natrosol 250HBR 3% 65 65
Mergal K14 2 2
Tioxide R902 90 90
Talc #400 80 80
CaCO3#325 190 250
Satintone W 60 -
Let down :
Ethyl glycol 10 10
HIPOP 380 3 3
HISOL AC53 220 180
Deionized water 140.4 120.4
HISOL D206 5.6 5.6
Ammonia 4 4
Coasol 5 5
HIQUE 332 - 60
TOTAL 1,000 1,000
PVC(%) 59.7 68.9
Solid Volum(%) 241 250.7
Viscosity(KU) 97 97
Whiteness(Y-reflectance) 84.41 85.95
Contrast ratio 0.9642 0.9732
Washability(300times) 1,700 1,830
Sheen paint based on HIQUE 332
Components Control 331 SH3305
Grind :
Deinoized water 201 202
Propylene glycol 20 20
HIDIS 40 2 2
Triton CF10 0.5 0.5
Nopco 8034L 0.5 0.5
AMP95 0.5 0.5
Mergal K14 1 1
TRONOX CR828 190 140
CaCO3#325 80 30
Let down :
Propylene glycol 6 6
Triron CF10 1.5 1.5
HIPOP 200 0.6 0.6
HISOL AC111 400 380
Deionized water 74.9 74.9
HIRESOL 180 10 10
HISOL D201 2.5 2.5
Ammonia 2 2
Coasol 6 6
HIQUE 332 - 120
TOTAL 1,000 1,000
PVC(%) 31.4 40
Viscosity(KU) 94 95
60 Gloss 13 16
Whiteness(Y-reflectance) 89.58 90.23
Contrast ratio 0.9762 0.9863
HISOL AC53 : Styrene-acrylic Emulsion binder
www.hankuck.co.kr
1ST INDUSTRIAL ESTATE, 321-21, GONGDAN-DONG, GUMI-SI GYEONGBUK KOREA
TEL 82-54-465-2805, 2804 FAX 82-54-465-2802
2010. HLC. Ltd.
Note :The statements made herein are based on our research and the research of others, and believed to be accurate. No guarantee of their accuracy is made.
However, and the products discussed are sold without warranty, express or implied, including warranty of merchantability and fitness for use of this material,
and upon condition that purchasers shall make own tests to determine the suitability of such products for their particular purposes. The user assumes all risk
of use or handling, whether or not in accordance with any action arising of the material being supplied shall be limited to replacement of material.