4.0. magnetic dent removal E 2012 - brass
4.0. magnetic dent removal E 2012 - brass
4.0. magnetic dent removal E 2012 - brass
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TOOLS FOR BRASS INSTRUMENTS<br />
<strong>4.0.</strong> MAGNETIC DENT REMOVAL<br />
E-Mail: boehmtools@t-online.de web: www.boehmtools.de<br />
MAGNETIC DENT REMOVING AND BURNISHING<br />
Dent removing and burnishing with magnet and ball is an ideal supplement to traditional methods when you have to remove<br />
<strong>dent</strong>s from conical and bent instrument parts. Its best application is in smoothing out <strong>dent</strong>s in tubing from dia 20mm, as in<br />
French horn, tenor, baritone, euphonium, tuba,saxophone.<br />
Caution: You should not use these tools for jobs in the bell area and on larger straight surfaces - risk of bulges and streaks!<br />
And you should not use it with barrel-shaped <strong>dent</strong>balls, only with perfectly round balls without hole.<br />
MAGNETIC DENT BURNISHER<br />
A really handy and practical <strong>dent</strong> burnishing tool with a strong<br />
set of magnets.<br />
Two <strong>magnetic</strong> tools in one : the set of magnets has different <strong>magnetic</strong><br />
strength – quick change from superstrong to less strong side.<br />
Comes complete with exchangeable hardened and polished discs in<br />
different shapes (flat and slightly rounded). The rounded disc makes it<br />
possible to use the tool on the inside radius of bent tubing.<br />
The discs also protect the magnet and prevent scratches.<br />
-451- Magnetic Dent Burnisher, complete with 2 hardened and<br />
polished discs and 8 pc. hardened steel balls dia 20-45mm<br />
• Nr. 451 is a “must” for each <strong>brass</strong> repair shop!<br />
MAGNETIC DENT TOOL<br />
Very strong magnet for eliminating <strong>dent</strong>s. This <strong>magnetic</strong> tool is stronger<br />
than our <strong>magnetic</strong> <strong>dent</strong> burnisher no 451 ( + about 40%) and can be used for<br />
thicker material.<br />
Complete with 2 hardened and polished discs. We supply this tool with a<br />
clamp: put the discs in this clamp and you can repolish them easily.<br />
-452SM 40 – <strong>magnetic</strong> <strong>dent</strong> tool, with 2 hardened and polished discs<br />
(flat and slightly rounded)<br />
with clamp (holder for repolishing the discs)<br />
(without balls)<br />
Caution:The magnet in 452SM40 is even stronger – so you must be even more careful!<br />
- 1 - (<strong>4.0.</strong> tools for <strong>brass</strong> instruments 12/13)<br />
451<br />
452SM-40
BALLS FOR DENT REMOVING AND BURNISHING<br />
WITH MAGNETIC DENT TOOLS<br />
451/K1- set of balls, hardened, 11 pc, dia 10-20mm,<br />
(without thread)<br />
451/K2- set of balls, hardened, 8 pc, dia 20-45mm<br />
(without thread)<br />
-451/K5- Supplementary set of balls,hardened,<br />
5 pc, dia 50-70mm, in steps of 5mm<br />
(without thread)<br />
Can also be ordered individually:<br />
-451/K5-50- steel ball, dia 50mm<br />
-451/K5-55- steel ball, dia 55mm<br />
-451/K5-60- steel ball, dia 60mm<br />
-451/K5-65- steel ball, dia 65mm<br />
-451/K5-70- steel ball, dia 70mm<br />
E-Mail: boehmtools@t-online.de web: www.boehmtools.de<br />
BALLS FOR TUBA – HOLLOW<br />
Useful when working on a tuba or baritone. These hollow balls are not<br />
hardened and not 100% round, but their advantage is their low weight.<br />
They are used with our <strong>magnetic</strong> <strong>dent</strong> burnisher no 451 or our <strong>magnetic</strong><br />
<strong>dent</strong> tool no 452 SM40.<br />
-451HK/50-80- hollow steel balls, set of 4 balls, dia. 50-80mm<br />
(These balls must be ordered as a set!)<br />
BALLS FOR TUBA - HOLLOW<br />
You can order these balls as a set or individually:<br />
-451HK/90-120- hollow steel balls,<br />
set of 4 pc. dia 90-120mm<br />
-451HK/90- hollow steel ball, dia 90mm<br />
-451HK/100- hollow steel ball, dia 100mm<br />
-451HK/110- hollow steel ball, dia 110mm<br />
-451HK/120- hollow steel ball, dia 120mm<br />
SAFETY WARNING<br />
- 2 - (<strong>4.0.</strong> tools for <strong>brass</strong> instruments 12/13)<br />
451/K2<br />
451/K1<br />
451/5<br />
451HK/50-80<br />
451HK/90-120<br />
• Strong magnets are used !<br />
• The tool must be kept away (at least 2m) from electronic and<br />
mechanical measuring devices and also from computers, monitors, diskettes,<br />
video tapes, bank cards etc.<br />
• People with a pace maker must not use this tool and must stay out of the <strong>magnetic</strong> field.<br />
The same may apply to people using other medical devices, e.g. hearing aids.<br />
• Remove ferrous parts and bits from your work area before using the tool.