pre-lab preparation sheet for lab 4—batteries, bulbs, and current
pre-lab preparation sheet for lab 4—batteries, bulbs, and current
pre-lab preparation sheet for lab 4—batteries, bulbs, and current
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. Now connect a voltage <strong>and</strong> a <strong>current</strong> sensor so that you are measuring the voltage<br />
across the battery <strong>and</strong> the <strong>current</strong> through the battery at the same time (see Figure 4-13).<br />
10. Open the experiment file called Current <strong>and</strong> Voltage (L04A2-4b) to display the<br />
<strong>current</strong> <strong>and</strong> voltage axes that follow.<br />
Figure 4-13: Sensors connected to measure the voltage across the battery <strong>and</strong> the <strong>current</strong> through it.<br />
11. Begin graphing, <strong>and</strong> close <strong>and</strong> open the switch several times, as be<strong>for</strong>e. Sketch your<br />
graphs, or print them <strong>and</strong> affix over the axes.<br />
Lab 04 – Batteries <strong>and</strong> Current
Change language