The Univers system - Hager

Characteristics of IP 65 enclosures
Polyester waterproof
enclosures IP65.
protection class :
- IP degree
IP 65 according to EN 60429
IK 10 according to EN 50102
- indirect contacts
class II according to CEI 536
(door closed by key)
- climatic conditions
class T3 according to CEI 68-2,
strong resistance to corrosion
Resistance to fire: 960 °C,
extinction - 5 s according to
CEI 60 695-2-1/0 and
60 695-2-1/1 (which replaces
NF C 20-455)
Nominal insulation voltage
Ui 660 V .
IP65 Enclosures are made of
glass reinforced polyester with
very low halogen, installation
from - 40 to + 110 °C.
Anti-corrosive material presenting
excellent performance and
requires no maintenance.
Colour RAL 7032.
The IP 65 enclosures are
delivered with:
door,
pre-mounted nut-clips,
(4 per row) for the fixing of the
uprights,
mounting pads,
1 flexible diagram holder,
1 contractor label and 1
mounting instruction.
choice of accessories,
see page 186
kits
see page 212
for dimensions,
see page 192
Contractor label
protection edge rain
proof
flexible adhesive diagram
holder, for
documents A4 format
finishing and side
protection profile
closing by lock bolt 3
points with key double
bar; for key lock and
other types of closing,
see page 185
nut clips for uprights
door :
opening angle : 130°
with embossing for nuts
M6 (FZ 801)
for fixing of strands or
trunking in the case of
auxiliaries on door
solid interior stainless
steel hinges
seal
184