<strong>Univers</strong> equipment <strong>system</strong> Dimensional <strong>system</strong> of IP 43, IP 54 and IP 65 enclosures. the inside width is divided in 250mm spaces span, the inside height is a multiple of 75mm, the uprights, delivered separately, are adjustable in depth (IP 54 and IP 65), equipment units adapted to this dimensional <strong>system</strong> simplify the enclosures conception and offer great flexibility for the installation of the devices. <strong>Univers</strong> equipment units: (delivered assembled) units for incoming devices 630 A, 1 and 2 span, units for distribution (busbars Cu), 1 span units for modular devices 1 and 2 span, perforated mounting plate for universal equipment, adjustable DIN rail units for non modular terminal blocks or clip-on devices, blank units, for high, low or intermediate part of the enclosure. <strong>The</strong>se units are fixed by selftapping screws on the uprights the enclosures; attached by the equipment units, the pillars represent a removable rack allowing assembly and wiring outside the enclosure. <strong>The</strong> equipment can be completed with various accessories facilitating the implementation of wiring : thread guide strap trunking multiplug partition for all types of modular devices decking, etc... IP 43 and IP 54 enclosures also have floor plinths of 100 and 200mm height to facilitate the installation on site. choice of equipment units, see pages 212 choice of accessories, see pages 228 Fixing of the uprights on pre-mounted nut clips, fixed on IP43 enclosure, adjustable in depth on IP54 and IP65 enclosures (except depth 205); insulated interior Flexible cable entry for outgoers on upper part of the IP54 enclosure. <strong>The</strong> unique gas injection <strong>system</strong> on the perimeter of the front plate, has consideraly reinforced his rigidity <strong>The</strong> plastic front plates of the equipment units are fixed with retained, sealable, quarter-turn screws. <strong>Univers</strong> System <strong>The</strong> handle of the front plates was re-designed. More ergonomic, it allows a better grip. 161
<strong>Univers</strong> Equipment Unit System 400A busbar, with link connectors on 400A MCCB Equipment unit with MCCB and add-on-block 125A, allowing the assembly of other modular devices on the rest of the row. Equipment unit pre-equipped for terminal blocks laid out vertically in 1 span of the enclosure, being used as cable chamber Equipment unit with perforated plate for of non modular devices mounting like contactors, torroids, transformers, etc.. 162