Novelty - Hazet-Logo

Hot Air Tool
Thread Repair
Ingenious Tools
Hot-Air Tool
3 parts, in plastic
case
• Power: 1600 Watts
• 2 temperature positions: 350 / 500 °C
• 2 air flow positions: 350 / 500 l/min
• Light-weight: 680 g
• Exhaust air will not be deflected through the motor
• Complete set, including stainless steel wide
slot nozzle and reflector nozzle, in plastic case
Universal Thread Repair Tool
Range: thread diameters 4–13 mm ( 5 ⁄32”– 1 ⁄2”)
• Quick fixation due to adjusting screw (A)
• Blades automatically adapted to any thread pitch
within range
• Repairs right- and left-hand threads
(observe direction of rotation!)
• Applicable to all forms of metric and
non-metric threads
B
Open Auf
Close Zu
B
Drehen Rotate
A
A
1990-1/3 EAN-No. 4000896141531
842 AG-1 EAN-No. 4000896140718
Turn adjusting
screw (A) to raise
blades (B). Place
Thread Repair Tool
over thread to be
repaired.
Turn adjusting
screw (A) to lower
blades into grooves
of thread and
tighten lightly.
Rotate Thread
Repair Tool in the
direction of the
arrow as shown.
Thread Repair
and Refill Sets
Cost-saving repair of
damaged or worn-out threads
• Application:
Thread plating of materials
presenting a low shearing
resistance, e.g. aluminium and
magnesium alloys; in machine
construction, automotive,
electrical and medical
engineering as well as in
aircraft and aerospace
• High-quality stainless chromenickel
steel provides good female
threads resisting the influences
of temperature and corrosion
• Reuse of rejects
Sets complete with twist drills,
installation tools, taps, pin breaking
tools and threaded inserts
Application / Thread Number EAN-No.
1
R K * of Parts 4000896+
Thread Repair Sets and Assortments
842-5/24 M 5 x 0,8 6,7 24 119295
842-6/24 M 6 x 1,0 8,0 24 119301
842-8/24 M 8 x 1,25 10,8 24 119318
842-10/14 M 10 x 1,5 13,5 14 119325
842-12/14 M 12 x 1,75 16,3 14 119530
842-14/17 M 14 x 1,25 (Spark Plug Thread)** – 17 119547
842-512/130 M 5–M 12 – 130 119554
842-614/113 M 6–M 14 – 113 119561
Spare Part Sets
842-05/10 M 5 x 0,8 6,7 10 124442
842-06/10 M 6 x 1,0 8,0 10 124459
842-08/10 M 8 x 1,25 10,8 10 124466
842-010/10 M 10 x 1,5 13,5 10 124473
842-012/10 M 12 x 1,75 16,3 10 124480
842-014/10 M 14 x 1,25 (Spark Plug Thread)* 16,4 10 124497
842-014A/10 M 14 x 1,25 (Spark Plug Thread)* 12,4 10 126354
842-014B/10 M 14 x 1,25 (Spark Plug Thread)* 8,4 10 126347
* Length of threaded insert when mounted
** With special thread cutting tool, without screw tap and twist drill
Drill out
the damaged thread
Install the threaded insert
Control
(thread and thread pitch)
Tap new thread
into pre-drilled hole
Lift the installation tool and
remove the tang with the tang break tool
www.hazet.com
31