12.01.2014 Views

Cameras for Industrial Applications - Hitachi Kokusai Electric ...

Cameras for Industrial Applications - Hitachi Kokusai Electric ...

Cameras for Industrial Applications - Hitachi Kokusai Electric ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Camera Link<br />

1CCD<br />

Black & White<br />

KP-F120CL<br />

Main Features<br />

g High speed read out<br />

Full pixel independent readout: 30 frames/second.<br />

g High resolution<br />

2/3-inch CCD.<br />

Effective pixels 1392(H) X 1040(V) and square<br />

lattice pixels.<br />

g Near infrared sensitivity<br />

Extended spectral response allows use of<br />

the camera in the near infrared region.<br />

g Digital output<br />

Camera Link<br />

g Full frame shutter<br />

Higher resolution in the vertical direction is ensured <strong>for</strong> moving objects.<br />

g Multi step electric shutter<br />

8 steps electric shutter up to 1/50000 second.<br />

g Frame on demand<br />

An external trigger signal input can be used to capture an image at a desired<br />

timing <strong>for</strong> instant view or processing.<br />

g Remote control<br />

Frame on demand, partial scan, etc. by remote control or rear panel switch.<br />

Main Specifications<br />

Imaging<br />

device<br />

Sensing area<br />

Total pixels<br />

Effective pixels<br />

Pixel size<br />

Aspect ratio 4 : 3<br />

Frame rate<br />

Horizontal scanning frequency<br />

Vertical scanning frequency<br />

Sync system<br />

Lens mount<br />

2/3-inch interline CCD (ICX285AL)<br />

1432 (H) x1050 (V)<br />

1392(H) x 1040 (V)<br />

6.45 µm (H) x 6.45 µm (V) (square lattice)<br />

8.98 mm (H) x 6.71 mm (V)<br />

30 frames per second (full pixel readout)<br />

32.07 kHz<br />

30 Hz<br />

Internal/external (HD/VD)<br />

C mount (Flange focal distance=17.526 mm<br />

Video output Digital output (Camera Link) Maximum cable length: 10m or analog output <strong>for</strong> image checking<br />

External sync input<br />

<strong>Electric</strong> shutter<br />

Gamma = 1<br />

Frame on demand<br />

Power supply voltage<br />

Current consumption<br />

Ambient<br />

Operation<br />

Storage<br />

HD/VD LVDS level<br />

1/30, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate)<br />

(A) Fixed shutter (8 steps or variable) (B) ONE trigger mode (C) TWO trigger mode (D) Smear reduction mode<br />

(E) Partial scan mode<br />

12 ± 1 VDC<br />

Approx. 400 mA<br />

0 to 40ºC (+32 to +104ºF) , less than 90 % RH<br />

Vibration endurance 10 to 200 Hz 68.6 m/s 2<br />

Shock endurance 490 m/s 2<br />

External dimensions<br />

Mass<br />

–10 to 50ºC (+14 to +122ºF) , less than 70 % RH<br />

58 (W) x 58 (H) x 48 (D) mm (Not including mount protrusions)<br />

Approx. 220 g<br />

Dimensions<br />

System configuration<br />

Standard composition<br />

• Camera<br />

• Operation instructions<br />

Optional accessories<br />

• 12 pin plug<br />

HR10A-10P-12S(01)<br />

• Junction box<br />

JU-M1A/JU-F1<br />

• Dummy glass (AR coated)<br />

ARC1214<br />

• Camera Link Cable<br />

• Camera cable (Molded type) 2m C-201KSM<br />

5m C-501KSM<br />

10m C-102KSM<br />

• Tripod adaptor<br />

TA-F120<br />

22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!