Cameras for Industrial Applications - Hitachi Kokusai Electric ...

Analog
Interlaced
1CCD Color
KP-D20A
KP-D20B
KP-D20B-S3
Main Features
g Compact multi purpose CCD color camera
Featuring high sensitivity and high image quality in a package measuring just
44(W) x 44(H) x 49(D) mm. An on-screen menu system allows optimum adjustment
of camera parameters to meet the imaging application.
Main Specifications
KP-D20A
KP-D20B
1/3-inch interline CCD
1/2-inch interline CCD
(NTSC: ICX408AK, PAL: ICX409AK) (NTSC: ICX418AKL, PAL: ICX419AKL)
Total pixels NTSC: 811 (H) x 596(V) , PAL: 795 (H) x 596(V)
Imaging
Effective pixels NTSC: 768 (H) x 494(V) , PAL: 752 (H) x 582(V)
device
NTSC: 6.35 µm (H) x 7.4 µm (V), NTSC: 8.4 µm (H) x 9.8 µm (V),
Pixel size
PAL: 6.5 µm (H) x 6.25 µm (V) PAL: 8.6 µm (H) x 8.3 µm (V)
Color filter RGB primary color mosaic filter
Sensing area
NTSC: 4.88 mm (H) x 3.66 mm (V), NTSC: 6.45 mm (H) x 4.84 mm (V),
PAL: 4.89 mm (H) x 3.64 mm (V) PAL: 6.47 mm (H) x 4.83 mm (V)
NTSC; Horizontal: 15.734 kHz, Vertical: 59.94Hz
Scanning frequency
PAL; Horizontal: 15.625 kHz, Vertical: 50 Hz
Sync system Internal
Lens mount
C/CS-mount (C-mount adaptor optionally)
Video output VBS, Y/C
Horizontal resolution NTSC: 480TV Line, PAL: 470TV Line
Minimum illumination 0.8 lx (F1.2, Max. gain) 0.3 lx (F1.2, Max. gain)
Signal noise to ratio 50 dB or more
Electric shutter
OFF(NTSC:1/60,PAL:1/50),1/100(PAL:1/120),1/25 0,1/500, 1/1000,1/20
00,1/4000,1/10000,1/20000,1/30000 second, AES
White balance ATW / AWC / MANUAL
Digital zoom
Enlarged 4 times smoothly
Backlight compensation Sensing areas selectable from 9 areas
Power supply voltage 12 VDC ±10%
Power consumption Approx. 220mA
Ambient Operation –10 to 50ºC (+14 to +122ºF) , 30 to 80 % RH
Storage –20 to 60ºC (–4 to +140ºF) , 20 to 90 % RH
Vibration endurance 10 to 55Hz 1.96 to 59.3m/s 2
External dimensions
44 (W) x 44 (H) x 49 (D) mm (Not including protrusions)
KP-D20B-S6: 58 (W) x 44 (H) x 49 (D) mm
Mass
Approx. 130 g KP-D20B-S6: 170 g
g KP-D20B-S3
: 12pin type, PAL type only
Dimensions
System configuration
Standard composition
• Camera
Optional accessories
• Tripod adaptor TA-D20AB
• C-mount adaptor LA-D20AB
• Remote plug HR10A-7P-4P(01)
• Lens plug E4-191J-100
• Operation instructions
• DC in plug R03-P3F
• Remote Y/C plug (D20BP-S3 only)
HR10A-10R-12S(01)
Analog
Interlaced
EM-CCD Color
KP-DE500
(NTSC only)
Analog
Interlaced
EM-CCD Black & White
KP-E500
(EIA only)
27
Main Features
g 100 Times More Sensitive Than A Normal Camera (KP-DE500)
A new 1/2 inch EM-CCD with electron multiplication is used to achieve exceptional sensitivity.
Color in full motion mode: 0.0009 lx
Color accumulation mode: 0.000015 lx
Monochrome in full motion mode: 0.00005 lx Monochrome accumulation mode: 0.0000008 lx
g For Even Greater Sensitivity A Monochrome Version of the Camera
is Available Allowing Use in Even Lower Light Levels (KP-E500)
In the normal mode of operation the camera provides higher sensitivity as compared to a normal
camera. In the accumulation mode unmatched sensitivity is achieved allowing use in extremely
low light situations.
Monochrome in full motion mode: 0.00003 lx Monochrome accumulation mode: 0.0000005 lx
Main Specifications
KP-DE500
KP-E500
g Hitachi Technology Enables Superior Image Reproduction In Low
Light Levels
Thermoelectric cooling used on the EM-CCD to reduce the effects of dark current
noise along with a new digital signal processor (DSP) that provides digital noise reduction
of the luminous signal yields sharp clear pictures with a high S/N ratio.
g Electron Multiplication used in the EM-CCD Improves Performance
g While Reducing Technical Issues (KP-E500)
Typical high sensitivity cameras use an Image Intensifier Tube that is subject to burn
in, afterimage (lag) and short life span. These problems are eliminated with the use
of the EM-CCD.
Dimensions
1/2-inch interline EM-CCD (KP-DE500: TC246RGB, KP-E500: TC247SPD)
Imaging device Total pixels: 680(H) x 500(V)
Effective pixels: 658(H) x 489(V)
Imaging area: 6.58(H) x 4.89(V) mm Pixel size: 10.0(H) x 10.0(V) µm (Square pixel)
Scanning frequency Horizontal 15.734 kHz
Vertical 59.94 Hz
Synchronization Internal
Video output
Video: 0.7 Vp-p Plus terminal nature
Burst: 0.3 Vp-p, More than 8 cycles
Sync: 0.3 Vp-p Negative polarity
Impedance: 75 Un-balancing
S/N
50 dB or more (luminosity signal, Gamma OFF, minimum gain, without detail boost)
Resolution Horizontal: 480 TV lines Vertical: 350 lines (In the central part)
0.0009 lx (Color in full motion, max. gain, F1.2, 50 IRE) 0.00003 lx (Monochrome in full motion,
0.00005 lx (B/W in full motion, max. gain, F1.2, 50 IRE) max. gain, F1.2, 50 IRE)
Minimum illumination
0.000015 lx (Color 64 time accumulation, max. gain, F1.2, 50 IRE) 0.0000005 lx (Monochrome 64 time
0.0000008 lx (B/W 64 time accumulation, max. gain,, F1.2, 50 IRE) accumulation, max. gain, F1.2, 50 IRE)
Sensitivity (Gain)
setup
Auto or a manual (factory set-AUTO)
Electric shutter
Shutter: 7 steps /AES (factory set-OFF)
OFF(1/60), 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000 sec
Accumulation Mode Auto or a fixed change is possible 2, 4, 6, 8, 10, 16, 32, 64 times
Backlight compensation ON/OFF change is possible Light-measurement area: Nine area to selection is possible.
White balance control ATW, AWC, MANUAL –
B/W Mode OFF, ON, AUTO –
DNR
Change of AUTO / MANU (8 steps)
Power supply voltage DC 12V ±1 V
Current consumption Approximately 1. 5 A (excluding lens load)
Lens mount The C / CS mount (flange back adjustment mechanism is attached)
Unit: mm
Ambient temperature Operating: –10 ºC to +50 ºC / 30 to 80% RH Storage: –20 ºC to +60 ºC / 20 to 90% RH
Vibration endurance 10 to 55Hz 1.96 to 59.3m/s 2
External dimensions 78(W) x 63(H) x 170(D) mm
Standard composition
Mass Approx. 600 g •Camera •Operation instructions •DC plug