CU-HD500 - Hitachi Kokusai Electric America, Ltd.

Backup battery replacement
Backup battery replacement
The backup battery is already installed at the factory.
If the time/date information no longer appears, set the power switch to on. If the PIX OUT shows “BACKUP BATT
EMPTY” for about 6 seconds, the battery needs to be replaced.
And the date and time need to be set at the TIME/DATE menu.
WARNING
Be sure to replace the battery with a type CR2032 lithium battery. Using another type
of battery can damage the camera and pose a fire hazard.
Also be sure to dispose of the depleted battery as prescribed by local ordinance (e.g.,
return it to the dealer). Do not dispose of the battery with combustible waste, as this
may pose a fire, safety and environmental hazard.
Backup battery
14