12.01.2014 Views

producer's statement formseal 3000x & tefond process - Hitchins

producer's statement formseal 3000x & tefond process - Hitchins

producer's statement formseal 3000x & tefond process - Hitchins

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

HITCHINS NEW ZEAL AND LIMIT ED<br />

P O BO X 4 0-749, U P P E R HUTT, W E L L I N G T O N, N E W Z E A LA N D T E L : 64 4 527 7248 F A X: 64 4 528 48 13<br />

PRODUCER’S STATEMENT<br />

On<br />

FORMSEAL 3000X & TEFOND PROCESS<br />

HITCHINS NEW ZEALAND LIMITED is the marketer of Formseal 3000X Tanking<br />

Membrane and Tefond protection sheet.<br />

All products are produced to a high standard and subject to strict Quality Control procedures.<br />

The Formseal 3000X Tanking Membrane and Tefond are installed by Builders Plastics<br />

Limited approved licensed Gunac applicators in keeping with Product Technical Dataspecs<br />

and comprehensive written Application Procedure instructions.<br />

Isoltema of Italy confirms a durability of 50 years for its Elotene 3000X product. This product<br />

is supplied to <strong>Hitchins</strong> New Zealand Limited and marketed in New Zealand and the Pacific<br />

Islands under their brand name Formseal 3000X.<br />

This product’s durability period of 50 years is that it will perform as required when application<br />

is done exactly following the instructions mentioned in our product literature over prepared<br />

surface that has been sealed with Formseal Primer, protected when back-filling and remain<br />

buried or protected from UV Rays.<br />

The Tefond range of products is manufactured by TEMA S.R.L. of Italy under strict quality<br />

control to high production standards and carries a Durability Statement for a 30 year<br />

period.<br />

Tefond is a high density extruded polyethylene membrane with raised 8mm stud profiles<br />

with side interlocking nodules at roll edges. It is supplied in rolls at 20 metres long by 2.07<br />

wide. Overlapping and engaging the interlocking nodules of subsequent sheets produces<br />

a continuous membrane.<br />

The Tefond range of accessories includes fixing plugs and nails, profile flashings, Elotene<br />

self adhesive tapes and sealants to provide a total system.<br />

The Tefond range of products is marketed by <strong>Hitchins</strong> New Zealand Ltd and installed by an<br />

approved Gunac applicator or skilled building contractor in keeping written installation<br />

instructions.


2<br />

Tefond provides protection to proprietary waterproofing membranes such as:<br />

●<br />

<strong>Hitchins</strong>’ Formseal 3000X, a self adhesive waterproofing membrane.<br />

<strong>Hitchins</strong> New Zealand Limited will provide a Product Performance Warranty for these<br />

products for a period as required under the Construction Act.<br />

Finally <strong>Hitchins</strong> New Zealand Limited under its Producer Statement, advise that Tefond<br />

will provide and perform as required if used and installed correctly.<br />

For and on behalf of:-<br />

HITCHINS NEW ZEALAND LIMITED<br />

Jim Gerbes<br />

MANAGING DIRECTOR<br />

Dated: 13 January 2005<br />

C:\W INW ORD\JIM \ PR ODU CER ’S STATEMENT

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!