IC-M91D/M92D Instruction Manual - ICOM Canada
IC-M91D/M92D Instruction Manual - ICOM Canada
IC-M91D/M92D Instruction Manual - ICOM Canada
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
New2001<br />
DSC OPERATION<br />
8<br />
r Push [CALL] to transmit the Test call.<br />
• If Channel 70 is busy, the transceiver stands by until the channel<br />
becomes clear.<br />
t After the Test call has been transmitted, the following<br />
screen is displayed.<br />
• The transceiver waits for an acknowledgment call on channel 70<br />
for 10 secconds, then waits for a call by alternately monitoring<br />
channel 70 and the operating channel.<br />
y When the acknowledgement call is received, beeps sound<br />
and the following screen is displayed.<br />
u Push [ALARM OFF] to stop the beeps, and then the screen<br />
as shown below is displayed.<br />
i Push [EXIT] to return to the normal operating mode.<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
13<br />
14<br />
15<br />
16<br />
42