SFMS Bank Application Interface Specifications Document ... - IDRBT

SFMS Bank Application Interface specifications Version 3.0
13. M MUR (Message
User Reference)
14. M Possible
Duplicate
Emission Flag
16 Alpha
Numeric
15. M Service Identifier 3 Alpha
Numeric
warning flag is specified.
If Non-delivery warning flag is
2, then this value should be set
to ‘000’.
If Non-delivery warning flag is
1, then obsolescence value
should be greater than or equal
to 002.
Range of the values for this
field can be between 002 to
999.
This is represented in absolute
number of units. Each unit is
internally interpreted as equal to
5 minutes.
For example Obsolescence
period of 003 units is equivalent
of 15 minutes.
Bank Application uses this field
for identifying the message. If it
is less than 16 then
concatenated with X.
1 Number Flag to indicate possible
duplicate emission
1 – YES
2 – NO
Destination Bank Application
identifier.
If not applicable, it should be
defaulted to XXX.
16. M Originating date 8 Number Date on which the message was
created at Bank application –
(YYYYMMDD)
17. M Originating time 4 Number Time on which the message
was created at Bank application
–(HHMM)
18.
19. M Testing and
Training flag
20. M Sequence
Number
1 Number Flag to indicate test and training
message.
1 – YES
2 – NO
9 Alpha
Numeric
Unique sequence number
generation by the external
application for the identification
of the message in external
application system. System
messages for the user messages
generated by external
applications will carry this
Confidential
Uncontrolled when Printed
Page 8 of 24