You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Generator and generating equipment<br />
Preparation<br />
- Remove starter motor<br />
- Detach gearbox/clutch cover assembly<br />
- Remove clutch<br />
- Remove flywheel<br />
Rotor Removal<br />
- Extract spring clip A from flywheel magnet by<br />
inserting snip-nosed pliers into cut-outs provided<br />
Generating Equipment Removal<br />
- Disconnect leads from temperature sensor and<br />
remove stator cable plug C from socket on<br />
equipment carrier<br />
- Remove bolts D (13 & 19 mm), noting position<br />
of spacers, washers and injector pipe clip (if<br />
fitted) and remove carrier and equipment<br />
complete from engine.<br />
- Pull magnet B from flywheel with even<br />
movement, if necessary with suitable puller<br />
Stator Removal<br />
- Detach plug E from stator cables with fine<br />
implement, first marking their positions.<br />
35
Change language