AT Commands Set

SIM5320 AT Command Set
Parameter sets/shows the result code presentation status in the TA:
0 – disable
1 – enable
0 – COLP not provisioned
1 – COLP provisioned
2 – unknown (e.g. no network, etc.)
Examples
AT+COLP?
+COLP: 1,0
OK
ATD10086;
VOICE CALL: BEGIN
+COLP: "10086",129,,,
OK
6.8 AT+CCUG Closed user group
Description
The command allows control of the Closed User Group supplementary service. Set command
enables the served subscriber to select a CUG index, to suppress the Outgoing Access (OA), and to
suppress the preferential CUG.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command
AT+CCUG=?
Read Command
AT+CCUG?
Responses
OK
Responses
+CCUG: ,,
OK
ERROR
+CME ERROR:
Write Command
AT+CCUG=
Responses
OK
SIM5320_ATC_V1.24 113
8/14/2012