AT Commands Set

SIM5320 AT Command Set
Information which shall be written to the SIM(hexadecimal character format, refer AT+CSCS).
Status information from the SIM about the execution of the actual command. It is returned in both
cases, on successful or failed execution of the command.
Response data in case of a successful completion of the previously issued command.
“STATUS” and “GET RESPONSE” commands return data, which gives information about the
currently selected elementary data field. This information includes the type of file and its size.
After “READ BINARY” or “READ RECORD” commands the requested data will be returned.
is empty after “UPDATE BINARY” or “UPDATE RECORD” commands.
Examples
AT+CRSM=?
OK
8.4 AT+SPIC Times remain to input SIM PIN/PUK
Description
The command is used to inquire times remain to input SIM PIN/PUK.
SIM PIN
NO
References
Vendor
Syntax
Test Command
AT+SPIC=?
Execution Command
AT+SPIC
Responses
OK
Responses
+SPIC: ,,,
OK
Defined values
Times remain to input PIN1 code.
Times remain to input PUK1 code.
Times remain to input PIN2 code.
Times remain to input PUK2 code.
SIM5320_ATC_V1.24 186
8/14/2012