AT Commands Set

SIM5320 AT Command Set
Defined values
0 – Disable result code,i.e. only “ERROR” will be displayed.
1 – Enable error result code with numeric values.
2 – Enable error result code with string values.
Examples
AT+CMEE?
+CMEE: 2
OK
AT+CPIN="1234","1234"
+CME ERROR: incorrect password
AT+CMEE=0
OK
AT+CPIN="1234","1234"
ERROR
AT+CMEE=1
OK
AT+CPIN="1234","1234"
+CME ERROR: 16
7.3 AT+CPAS Phone activity status
Description
Execution command returns the activity status of the ME. It can be used to interrogate the
ME before requesting action from the phone.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command
AT+CPAS=?
Execution Command
AT+CPAS
Responses
+CPAS: (list of supported s)
OK
Responses
+CPAS:
OK
Defined values
SIM5320_ATC_V1.24 162
8/14/2012