You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Power<br />
The Advanced screen allows the user to configure the various advanced BIOS options.<br />
IMPORTANT:Making incorrect settings to items on these pages may c<strong>au</strong>se the system to malfunction. Unless<br />
you have experience adjusting these items, we recommend that you leave these settings at the<br />
def<strong>au</strong>lt values. If making settings to items on these pages c<strong>au</strong>ses your system to malfunction or<br />
prevents the system from booting, open BIOS and choose Load Op<strong>tim</strong>al Def<strong>au</strong>lts in the Exit menu to<br />
boot up normally.<br />
F1 Help<br />
ESC Exit<br />
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the def<strong>au</strong>lt<br />
and suggested parameter settings.<br />
Parameter Description Submenu Items<br />
Advanced CPU<br />
Control<br />
Platform Power<br />
Management<br />
InsydeH20 Setup Utility Rev. 3.5<br />
Information Main<br />
Advanced Security Power Boot Exit<br />
�� Advanced CPU Control<br />
�� Platform Power Management<br />
�� Break Event<br />
ACPI ACPI S3:<br />
Wake Wake on PME<br />
Wake on on Modem Modem Ring<br />
Quickly S4 Resume<br />
Auto wake wake on on S5<br />
Select Item<br />
Select Menu<br />
[Enabled]<br />
[Enabled]<br />
[Enabled]<br />
[Disabled]<br />
[Disabled]<br />
F5/F6<br />
Enter<br />
Change Values<br />
Select SubMenu<br />
Item Specific Help<br />
These items control<br />
various CPU parameters.<br />
Enter the Advanced CPU Control menu. • P-States (IST)<br />
• Boot performance mode<br />
• Thermal Mode<br />
• CMP Support<br />
• Use XD capability<br />
• VT Support<br />
• SMRR Support<br />
• C-States<br />
• Enhanced C-States<br />
• C-State Pop Up Mode<br />
• C-State Pop Down Mode<br />
• C4 Exit Timing Mode<br />
• Deep C4<br />
• Hard C4E<br />
• Enable C6<br />
Enter the Platform Power Management<br />
menu.<br />
• PCI Clock Run<br />
Chapter 2 31<br />
F9<br />
F10<br />
Setup Def<strong>au</strong>lt<br />
Save and Exit
Change language