HT 2016 - Digital jordmodstandsmĺling. - Elma Instruments
HT 2016 - Digital jordmodstandsmĺling. - Elma Instruments
HT 2016 - Digital jordmodstandsmĺling. - Elma Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Geotest <strong>2016</strong><br />
Version EN 1.01 of 19/10/2000<br />
NOTE!<br />
The test with result over 700Ω is not inserted in the calculation of medium<br />
value.<br />
Example:<br />
1 st measurement<br />
Main display: 1,07Ω<br />
Secondary display on the left-hand side: 1<br />
Secondary display on the right-hand side: 1,07Ω<br />
2 st measurement<br />
Main display: 4,15Ω<br />
Secondary display on the left-hand side: 2<br />
Secondary display on the right-hand side: 2,61Ω<br />
3 st measurement (not inserted in the medium value)<br />
Main display: 1018Ω<br />
Secondary display on the left-hand side: 2<br />
Secondary display on the right-hand side: 2,61Ω<br />
CLR<br />
Press CLR if you want to cancel the medium resistance value and the no. of<br />
measurements which are included in the calculation (displayed on the<br />
secondary displays on the right-hand side and on the left-hand side<br />
respectively). A screen similar to the following will be displayed:<br />
0.96 Ω<br />
Last resistance value<br />
measured<br />
- - -<br />
- - -<br />
NOTE!<br />
The resistance measurement is taken according to a 4-wires voltmetric method.<br />
Therefore, it’s not affected by the resistance value of the cabled used: it’s not<br />
necessary to calibrate the cables or their extension.<br />
SAVE<br />
The test results can be memorised by pressing SAVE (see paragraph 5.1)<br />
EN - 15