HT 2016 - Digital jordmodstandsmÃ„Âºling. - Elma Instruments

More documents

Recommendations

Info

Geotest <strong>2016</strong> Version EN 1.01 of 19/10/2000 b) 2 nd measurement: you see the message “Add”. It means that the second measurement is included in the calculation of the average; by pressing AVG you will get also the medium value calculated. 7.4 Ωm ρ This screen appears after press in AVG 002 Add 002 indicates that 7.4Ωm is the medium value calculated as average between the two values previously measured. Press ESC to return back to the screen corresponding to the second measurement. Once returned back to the second measurement, press CLR if you want to cancel the medium value calculated and the corresponding counter. c) 3 rd measurement: we could repeat what stated at point b) but the medium value is calculated as average between the three values measured. 7.3Ωm ρ This screen appears afterr pressing AVG 003 Add 003 indicates that 7.3Ωm is the medium value calculated as average between the three values previously measured. EN - 20
Geotest <strong>2016</strong> Version EN 1.01 of 19/10/2000 4.4. ANOMALOUS SITUATIONS WHICH CAN OCCUR DURING TESTS If the voltmetric circuit (red and green cables) is interrupted, when pressing GO the instrument doesn’t manage to read the minimum voltage, therefore a screen similar to the one beside appears. Make sure that the terminals are connected correctly and that the voltmetric rod (red conductor) has not been driven into a gravelly or scarcely conductive ground. If necessary, pour water around the rod. - - - P - - - WARNING rP indicates an high resistance value. SAVE THIS RESULT CANNOT BE SAVED. If the amperometric circuit is interrupted, when pressing GO the instrument doesn’t manage to read the minimum current, therefore a screen similar to the one beside appears. Make sure that the terminals are connected correctly and that the amperometric rod (blue conductor) has not been driven into a gravelly or scarcely conductive ground. If necessary, pour water around the rod. - - - - - - c WARNING rC indicates an high resistance value. SAVE THIS RESULT CANNOT BE SAVED. EN - 21
Page 1 and 2: Instruction Manual 2016
Page 3 and 4: 1. PRECAUTIONS AND SAFETY MEASURES
Page 5 and 6: 2. GENERAL DESCRIPTION Geotest 2016
Page 7 and 8: AVG Geotest 2016 Version EN 1.01 o
Page 9 and 10: 4. SWITCH FUNCTIONS Geotest 2016 Ve
Page 11 and 12: Geotest 2016 Version EN 1.01 of 19/
Page 13 and 14: 4.2. EARTH 3 WIRES Geotest 2016 Ver
Page 17 and 18: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 Geote
Page 19: Geotest 2016 Version EN 1.01 of 19/
Page 25 and 26: 5.2. TO RECALL: KEY "RCL" Geotest 2
Page 29 and 30: 7. CONNECTING THE INSTRUMENT TO A P
Page 31 and 32: 9. TECHNICAL SPECIFICATIONS Geotest
Page 33 and 34: 9.2. OPERATING CONDITIONS Geotest 2
Page 35 and 36: 11. PRACTICAL REPORTS FOR ELECTRICA
Page 37 and 38: For big earth plant Geotest 2016 Ve
Page 41: Via Righi 126 48018 - Faenza (RA)-

HT 2016 - Digital jordmodstandsmÃ„Âºling. - Elma Instruments

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?