LP/TLP 2844 - Koncept-L

Zebra Desktop Series
LP/TLP 2844 Product Guide
Options and Accessories
The 2844 printers are available with a wide array of options and accessories. Printer options
are factory installed, accessories can be purchased and added on in the field.
1. Options – Factory Installed.
Memory
Printer memory is expandable to support additional application requirements. An SRAM
memory upgrade is available to increase the image buffer size. Image buffer dictates the
maximum label length in single and double buffer mode. A flash memory expansion
offers increased storage of forms, fonts, and graphics.
SRAM Configuration
Total
Max. label length
(@ 892 dots width)
Max Label length
in double buffer
(@ 892 dots width)
Standard Memory 256 KB 11” (279mm) 5.5” (140mm)
Optional Memory
(256kB additional)
512 KB 22” (559mm) 11” (279mm)
Flash Configuration
Used For
Total
Forms, Fonts and
Firmware
Graphics
Standard Memory 512 KB 64 KB 448 KB
Optional Memory
(512kB additional)
1MB 64 KB 936 KB
Cutter
The LP/TLP 2844 can be factory-equipped with a guillotine style paper cutter. The cutter
is designed to cut paper or label liner. It is not recommended that the cutter is used to
cut through labels or other adhesive-backed material (adhesive may jam the cutter
blade).
TLP 2844 with cutter
Cutter Specifications
Warranty 90 days
Blade Life 1,500,000 cycles
Expectancy
Media:
Media Type Paper, Paper Liner
Max. 0.0053 inches
Thickness (0.135mm)
Media 120 g/m2
Density
Min. Label 1.25”
Length
Zebra LP/TLP 2844 Product Guide
RevZ1 April 2001
42