User manual - JG Technologies
User manual - JG Technologies
User manual - JG Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Sonar DSM connection<br />
600 watt DSM-compatible sonar transducer connection via<br />
optional adaptor — Sonar variant multifunction displays<br />
1<br />
4<br />
SeaTalk hs / RayNet<br />
2<br />
1<br />
2<br />
3<br />
3<br />
1. Rear connector panel of multifunction display (Sonar variant).<br />
D12257-1<br />
2. E66066 adaptor cable.<br />
SeaTalk hs / RayNet<br />
D12255-1<br />
3. Sonar transducer.<br />
1. Rear connector panel of multifunction display (Non-sonar<br />
variant).<br />
2. Raymarine network switch.<br />
3. Raymarine (external) DSM unit<br />
4. RayNet cable.<br />
The multifunction display can be used with the following DSM units:<br />
• DSM300<br />
• DSM30<br />
Transducer adaptor cable<br />
Cable<br />
0.5 m (1.64 ft) transducer adaptor<br />
cable<br />
Part number<br />
E66066<br />
Sonar transducer connection — Non-Sonar variant<br />
multifunction displays<br />
1<br />
Note: You can also connect a sonar variant multifunction display<br />
to an external DSM unit. This is useful in circumstances where<br />
you need a higher powered DSM for example. You can only use<br />
one sonar transducer at any one time.<br />
4<br />
2<br />
Sonar connected directly to the display<br />
On smaller systems (with only one display and no other SeaTalk hs /<br />
RayNet devices) the DSM may be connected directly to the display<br />
without using a Raymarine network switch.<br />
Note: You must ensure that the cable ends connected into the<br />
display and DSM have a locking / weather-tight mechanism.<br />
SeaTalk hs /<br />
RayNet<br />
SeaTalk hs / RayNet<br />
5<br />
Compatible sonar transducers<br />
The multifunction display is compatible with the following sonar<br />
transducers:<br />
• Raymarine P48.<br />
• Raymarine P58.<br />
• Minn Kota transducers Sonar variant Raymarine displays only),<br />
via optional A62363 adaptor cable.<br />
• Any 600 watt DSM-compatible transducer, via optional E66066<br />
adaptor cable.<br />
Sonar transducer connection — Sonar variant multifunction<br />
displays<br />
3<br />
1. Rear connector panel of multifunction display (Non-sonar<br />
variant).<br />
2. Raymarine network switch (only required if connecting more<br />
than one device using SeaTalk hs / RayNet).<br />
3. RayNet cable.<br />
4. Raymarine DSM unit<br />
5. Sonar transducer cable.<br />
6. Sonar transducer.<br />
Minn Kota sonar transducer connection via optional adaptor<br />
cable (Sonar variant multifunction displays only)<br />
6<br />
D12258-1<br />
1 3<br />
2<br />
4<br />
D12256-1<br />
1<br />
2 3<br />
1. Rear connector panel of multifunction display (Sonar variant).<br />
2. Sonar transducer cable.<br />
3. Sonar transducer.<br />
1. Rear connector panel of multifunction display (Sonar variant).<br />
2. Minn Kota transducer adaptor cable.<br />
3. Minn Kota transducer cable.<br />
4. Minn Kota transducer.<br />
D12259-1<br />
38 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127
Change language