User manual - JG Technologies

4.14 Bluetooth connections
Remote control connection
You can control the multifunction display wirelessly using a
Raymarine remote control unit.
The remote control uses a Bluetooth wireless connection.
1 2
3
2. Bluetooth connection.
3. Bluetooth-compatible media player.
To use this feature you must first:
• Enable Bluetooth in the System Settings on the multifunction
display.
• Enable Bluetooth on the media player device.
• Pair the media player device with the multifunction display.
• Enable Audio Control in the System Settings on the multifunction
display.
Note: If your media player does not include built-in speakers it
may be necessary to connect the media player’s audio output
to an external audio system or a pair of headphones. For more
information refer to the instructions that accompany the media
player device.
D12163-2
1. Multifunction display.
2. Bluetooth connection.
3. Raymarine Bluetooth remote control (for example, RCU-3).
To use the remote control you must first:
• Enable Bluetooth in the System Settings on the multifunction
display.
• Pair the remote control unit with the multifunction display.
Pairing the remote and configuring the UP and DOWN buttons
The remote control unit must be “paired” with the multifunction
display that you want to control. On your multifunction display, with
the homescreen displayed:
1. Select Set-up.
2. Select System Settings.
3. Select Connections.
4. Select Bluetooth > On.
5. Select New Bluetooth Connection.
A pop-up message will be displayed to confirm that the device
you are connecting to is discoverable.
6. Select Ok to confirm.
7. On your remote control unit, hold down the UP and DOWN
buttons together for 10 seconds.
8. Select OK to clear the on-screen message.
A list of discovered devices is displayed.
9. Select the remote control unit in the list of devices.
10.When prompted, press the arrow button on your remote that you
wish to be configured as the UP button. The other arrow button
will automatically be configured as the DOWN button.
If the pairing was successful a “Pairing Success” message will
be displayed. If a “Pairing Failure” or “Pairing Timeout” message
is displayed, repeat steps 1 to 9.
Media player connection
You can use your multifunction display to wirelessly control a
Bluetooth-compatible media player (such as a smartphone).
The media player must be compatible with the Bluetooth AVRCP
protocol (version 2.1 or higher).
1 2
3
D12164-1
1. Multifunction display.
48 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127