alithicon “fleet” synthetic enclosed gear and transmission lubricants

More documents

Recommendations

Info

ALITHICON C-155 SYNTHETIC BEARING LUBRICANT THE ALITHICON C-155 SYNTHETIC BEARING LUBRICANT IS SPECIFICALLY FORMULATED TO BE APPLIED WHERE CONVENTIONAL SOAP-THICKENED, OR SO CALLED NON-MELT GREASES, WILL NOT PROVIDE ADEQUATE PERFORMANCE. THE ALITHICON C-155 SYNTHETIC LUBRICANT IS A SYNTHETICALLY THICKENED GREASE WHICH EMPLOYS A HIGH THERMAL STABLE SYNTHETIC BASE FLUID, ALLOWING IT TO PROVIDE SUPERIOR LUBRICATION AND PROTECTION TO BEARINGS WHICH MUST OPERATE IN TEMPERATURES OF UP TO 700° F WITHOUT MELTING OR HARDENING IN SERVICE. TWO ADDITIONAL IMPORTANT FEATURES OF THE ALITHICON C-155 SYNTHETIC LUBRICANT IS: BEING WATERPROOF, RESISTING WATER WASH-OUT, AND HAVING A LONG SERVICE LIFE, REDUCING GREASE CONSUMPTION AS MUCH AS 800% WHEN COMPARED TO OTHER GREASES NORMALLY USED IN THESE APPLICATIONS. THE ALITHICON C-155 SYNTHETIC LUBRICANT HAS AN O.K. TIMKEN LOAD RATING OF 100 lbs, MINIMUM, AND WILL PRODUCE AND EXTENDED BEARING LIFE OF UP TO 400%. IT IS NOT NECESSARY TO LIMIT THE USE OF THE ALITHICON C-155 SYNTHETIC LUBRICANT ONLY TO BEARINGS OPERATING UNDER EXTREME TEMPERATURES OR WET CONDITIONS TO JUSTIFY THE ADDITIONAL COST. MANY LONG-TIME USERS OF THE ALITHICON C-155 SYNTHETIC LUBRICANT STATE THAT IT WAS PRIMARILY PURCHASED FOR USE IN THESE EXTREME, HIGH MAINTENANCE AREAS, BUT IT WAS LATER TRIED IN BEARINGS ON MACHINERY OPERATING IN AMBIENT TEMPERATURES AND UNDER AVERAGE CONDITIONS. BY REDUCING LUBRICANT CONSUMPTION, THE COST DIFFERENCE WAS JUSTIFIED. EXTRA PROFITS FROM THE USE OF THE ALITHICON C-155 SYNTHETIC LUBRICANT WAS GENERATED BY REDUCING LUBRICANT REPLACEMENT, LABOR COSTS, LESS MACHINERY DOWNTIME, AND INCREASED PRODUCTION. USER BENEFITS: * WITHSTANDS HIGH TEMPERATURES OF UP TO 700° F * WATERPROOF * EXTENDS BEARING LIFE OF UP TO 400% * WILL NOT MELT OR SLING FROM BEARINGS * REDUCES LUBRICANT CONSUMPTION OF UP TO 80% * EXCELLENT PUMPABILITY THROUGH CENTRALIZED LUBRICATION SYSTEMS * AN O.K. TIMKEN LOAD RATING OF 100 lbs, MINIMUM FOR TYPICAL SPECIFICATIONS, TEST RESULTS, APPLICATIONS, AND COMPATIBILITY INFORMATION, SEE FOLLOWING PAGE ALITHICON LUBRICANTS CO., INC / P O BOX 5225 / ALBANY, GEORGIA 31706 PHONE: 229-883-9515 / FAX: 229-883-9516 E-MAIL: ALITHICON@ALITHICON.COM / WEBSITE: WWW.ALITHICON.COM
ALITHICON C-155 SYNTHETIC LUBRICANT INFORMATION APPLICATIONS: DRY KILN FAN BEARINGS, SEALED FOR LIFE BEARINGS, STACK LOUVERS, COOKER BEARINGS, FLOTATION DRYER BEARINGS, TEXTILE MACHINERY, DOCTOR BEARINGS ON YANKEE DRYERS, ELECTRICAL GENERATING TURBINE LINKAGE BEARINGS, STOKER TRAVELING GRATE BEARINGS, AND MANY, MANY MORE. TYPICAL TEST DATA ASTM TEST C-155 NLGI GRADE 1.5 COLOR BASE FLUID VISCOSITY CENTISTOKES, 40° C 1,400 VISCOSITY SUS @ 100° F 6,485 VISCOSITY SUS @ 210° F 463 VISCOSITY INDEX 160 AVAILABLE PACKAGING * 30 - 14.5 oz TUBE CASE * 6 - 7.5 CAN CASE * 45 lb PAIL * 120 lb KEG * 420 lb DRUM * BULK LUBRICANT COMPATIBILITY CLEAR WORKED PENETRATION 305 PROLONGED WORKED D-217 0.8 PENETRATION, % CHANGE DROPPING POINT, MIN. D-566 NON-MELT TEMPERATURE OPERATING RANGE +28° F TO +700° F TIMKEN O.K. LOAD, lbs, MIN. 2782 100 ACID RESISTANCE EXCELLENT ROLL STABILITY, % CHANGE 1831 0.6 LEAKAGE TENDENCIES, % MAX. D-1264 0.1 WATER WASHOUT, % MAX. 38° C (100° F) 70° C (175° F) OXIDATION STABILITY, MAX. PRESSURE DROP @ 100 hrs., KPS (PSI) FOUR BALL METHOD, MAX. LOAD WHICH WELDING OCCURS kg (lbs) D-1264 ALUMINUM COMPLEX BARIUM COMPLEX CALCIUM STEARATE CALCIUM 12-HYDROXY CALCIUM COMPLEX CALCIUM SULFONATE COMPLEX BENTONE / CLAY LITHIUM COMPLEX LITHIUM STEARATE 0.02 0.02 D-942 1 D-2596 3.94 WEAR PREVENTATIVE D-2266 .2 mm CHARACTERISTICS, MAX. SCAR DIAMETER 40 kg LOAD, 120 R.P.M. DENSITY, lbs PER GALLON 7.04 LITHIUM 12-HYDROXY SILICA SODIUM POLYUREA
Page 1 and 2: ALITHICON “FLEET” SYNTHETIC ENC
Page 3 and 4: ALITHICON E.P. PARA/SYNTHETIC ENCLO
Page 5 and 6: SGO ALITHICON SYNTHETIC ENCLOSED GE
Page 7 and 8: ALITHICON FM FOOD MACHINERY GEAR OI
Page 9 and 10: ALITHICON 7900 PARA/SYNTHETIC POWER
Page 11 and 12: ALITHICON PARA/SYNTHETIC TURBINE OI
Page 13 and 14: ALITHICON FM FOOD MACHINERY TURBINE
Page 15 and 16: ALITHICON 9700 PARA/SYNTHETIC INDUS
Page 17 and 18: ALITHICON 822 SYNTHETIC HIGH TEMPER
Page 19 and 20: ALITHICON DC-1300 SYNTHETIC HIGH TE
Page 21 and 22: 700 ALITHICON SYNTHETIC HEAT TRANSF
Page 23 and 24: ALITHICON FM-H27 PARA/SYNTHETIC CRA
Page 25 and 26: ALITHICON AL-32 PARA/SYNTHETIC AIR
Page 27 and 28: ALITHICON FM-AL-26 SYNTHETIC FOOD M
Page 29: ALITHICON SYNTHETIC TURBINE OIL THE
Page 32 and 33: 1101 ALITHICON PARA/SYNTHETIC STOKE
Page 34 and 35: ALITHICON LUBRICANTS CO., INC / P O
Page 36 and 37: 2212 ALITHICON BEARING LUBRICANT CO
Page 38 and 39: BEARING LUBRICANT (NLGI - 2) TYPICA
Page 40 and 41: ALITHICON 4522-FM SYNTHETIC FOOD MA
Page 42 and 43: 9992-TL TECHNICAL SPECIFICATIONS NL
Page 44 and 45: B-51 ALITHICON SYNTHETIC LUBRICANT
Page 46: ALITHICON C-155 SYNTHETIC LUBRICANT
Page 52 and 53: OG-7000 SEMI-SYNTHETIC OPEN GEAR LU
Page 54 and 55: 7702 ALITHICON BEARING LUBRICANT NL
Page 56 and 57: APPLICATIONS: ALL FOOD MACHINERY AP
Page 58 and 59: ALITHICON OG-3000 E.P. PARA/SYNTHET
Page 60 and 61: ALITHICON 4500 SPECIAL LUBRICANT TY
Page 62 and 63: ALITHICON GASOLINE & DIESEL FUEL IM
Page 64 and 65: ALITHICON 767 CHAIN, CABLE, OPEN-GE
Page 66 and 67: ALITHICON LUBRICANTS CO., INC / P O
Page 68: ALITHICON FM-555 AEROSOL FOOD MACHI

alithicon “fleet” synthetic enclosed gear and transmission lubricants

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?