alithicon “fleet” synthetic enclosed gear and transmission lubricants

More documents

Recommendations

Info

ALITHICON GASOLINE & DIESEL FUEL IMPROVER TYPICAL SPECIFICATIONS AND TEST RESULTS FLASH POINT, ° F. (ASTM D-92) 119 CORROSION TEST (ASTM D-665) PASS VARNISH & GUM TEST (ASTM D-189) PASS POUR POINT, ° F. - 70 SPECIFIC GRAVITY, DEGREES, API 27.5 VISCOSITY SUS @ 100° F. 54.1 VISCOSITY SUS @ 32° F. 296 VISCOSITY SUS @ 0° F. 1205 ACID NEUTRALIZER TEST EXCELLENT MOISTURE ABSORBTION TEST EXCELLENT COLOR LIGHT AMBER AVAILABLE PACKAGING: * 24 / 1 QUART CASE * 6 / 1 GALLON CASE * 6 GALLON PLASTIC PAIL * 55 GALLON DRUM TREATMENT RATIO: ONE GALLON OF ALITHICON DIESEL FUEL IMPROVER TREATS 500 GALLONS OF GASOLINE OR DIESEL FUEL. ON THE INITIAL TREATMENT, IT IS SUGGESTED TO MIX ONE GALLON OF ALITHICON GASOLINE & DIESEL FUEL IMPROVER TO 100 GALLONS OF GASOLINE OR DIESEL FUEL TO ENSURE A CLEAN FUEL SYSTEM. (1) OUNCE OF ALITHICON GASOLINE AND DIESEL FUEL IMPROVER TREATS (3) GALLONS OF GASOLINE OR DIESEL FUEL. ALITHICON LUBRICANTS CO., INC / P O BOX 5225 / ALBANY, GEORGIA 31706 PHONE: 229-883-9515 / FAX: 229-883-9516 E-MAIL: ALITHICON@ALITHICON.COM / WEBSITE: WWW.ALITHICON.COM
ALITHICON 767 CHAIN, CABLE, OPEN-GEAR, & BEARING AEROSOL LUBRICANT THE ALITHICON 767 AEROSOL LUBRICANT IS AN EXCELLENT LUBRICANT DESIGNED FOR USE TO LUBRICATE ROLLER CHAINS, CABLES, OPEN-GEARS, WORKING MECHANISMS, AND BEARINGS. IT IS A TACKY LUBRICANT, WHICH IS EASY TO APPLY, RESISTS WATER WASH-OFF, AND WITHSTANDS TEMPERATURES OF UP TO 540° F WITHOUT MELTING OR DRIPPING. THE ALITHICON 767 AEROSOL LUBRICANT IS OUR 2212 BEARING LUBRICANT, WHICH HAS BEEN THINNED WITH HEPTANE AND PRESSURIZED IN AN AEROSOL CAN FOR EASY APPLICATION. WHEN THE ALITHICON 767 LUBRICANT IS APPLIED TO ROLLER CHAINS, THE EXTREMELY THIN LUBRICANT WILL PENETRATE INSTANTLY INTO THE PINS AND BUSHINGS, THEN IN APPROXIMATELY 180 SECONDS, THE SOLVENTS WILL EVAPORATE, LEAVING EACH CHAIN LINK LUBRICATED FROM THE INSIDE OUT. THE ALITHICON 767 LUBRICANT WILL ELIMINATE CHAIN LINK FREEZING AND CHAIN SPROCKET JUMPING. ROLLER CHAINS AND CHAIN SPROCKET LIFE ARE EXTENDED OF UP TO 500% WHEN PROPERLY USING THE 767. THE ALITHICON 767 AEROSOL LUBRICANT PENETRATES INSIDE CABLES, THEN DRIES TO AN NLGI-2 GREASE, LUBRICATING EACH STRAND, AND CABLE LIFE IS GREATLY EXTENDED. WHEN THE ALITHICON 767 AEROSOL LUBRICANT IS USED TO LUBRICATE OPEN GEARS AND HARD-TO-REACH WORKING MECHANISMS, IT REACTS IN THE SAME MANNER. IT COATS THE SURFACES, THEN DRIES TO A LIGHT-WEIGHT GREASE, OFFERING A PROTECTIVE CUSHION, THUS GREATLY REDUCING WEAR. USER BENEFITS: * EASY TO APPLY * RESISTS WATER WASH-OFF * RATES AN O.K. TIMKEN LOAD OF 70 lbs., MIN. * RESISTS THE ATTRACTION OF LINT, DIRT, OR DUST * GREATLY REDUCES WEAR AND EXTENDS EQUIPMENT LIFE * FREE OF HEXANE APPLICATIONS: ROLLER CHAINS, CABLES, OPEN GEARS, WORKING MECHANISMS, SLIDING SURFACES, MOTOR GRADER CIRCLES, PIVOT POINTS, BEARINGS, ETC. ALITHICON LUBRICANTS CO., INC / P O BOX 5225 / ALBANY, GEORGIA 31706 PHONE: 229-883-9515 / FAX: 229-883-9516 E-MAIL: ALITHICON@ALITHICON.COM / WEBSITE: WWW.ALITHICON.COM
Page 1 and 2:
ALITHICON “FLEET” SYNTHETIC ENC
Page 3 and 4:
ALITHICON E.P. PARA/SYNTHETIC ENCLO
Page 5 and 6:
SGO ALITHICON SYNTHETIC ENCLOSED GE
Page 7 and 8:
ALITHICON FM FOOD MACHINERY GEAR OI
Page 9 and 10:
ALITHICON 7900 PARA/SYNTHETIC POWER
Page 11 and 12: ALITHICON PARA/SYNTHETIC TURBINE OI
Page 13 and 14: ALITHICON FM FOOD MACHINERY TURBINE
Page 15 and 16: ALITHICON 9700 PARA/SYNTHETIC INDUS
Page 17 and 18: ALITHICON 822 SYNTHETIC HIGH TEMPER
Page 19 and 20: ALITHICON DC-1300 SYNTHETIC HIGH TE
Page 21 and 22: 700 ALITHICON SYNTHETIC HEAT TRANSF
Page 23 and 24: ALITHICON FM-H27 PARA/SYNTHETIC CRA
Page 25 and 26: ALITHICON AL-32 PARA/SYNTHETIC AIR
Page 27 and 28: ALITHICON FM-AL-26 SYNTHETIC FOOD M
Page 29: ALITHICON SYNTHETIC TURBINE OIL THE
Page 32 and 33: 1101 ALITHICON PARA/SYNTHETIC STOKE
Page 34 and 35: ALITHICON LUBRICANTS CO., INC / P O
Page 36 and 37: 2212 ALITHICON BEARING LUBRICANT CO
Page 38 and 39: BEARING LUBRICANT (NLGI - 2) TYPICA
Page 40 and 41: ALITHICON 4522-FM SYNTHETIC FOOD MA
Page 42 and 43: 9992-TL TECHNICAL SPECIFICATIONS NL
Page 44 and 45: B-51 ALITHICON SYNTHETIC LUBRICANT
Page 46: ALITHICON C-155 SYNTHETIC LUBRICANT
Page 49: ALITHICON C-155 SYNTHETIC LUBRICANT
Page 52 and 53: OG-7000 SEMI-SYNTHETIC OPEN GEAR LU
Page 54 and 55: 7702 ALITHICON BEARING LUBRICANT NL
Page 56 and 57: APPLICATIONS: ALL FOOD MACHINERY AP
Page 58 and 59: ALITHICON OG-3000 E.P. PARA/SYNTHET
Page 60 and 61: ALITHICON 4500 SPECIAL LUBRICANT TY
Page 64 and 65: ALITHICON 767 CHAIN, CABLE, OPEN-GE
Page 66 and 67: ALITHICON LUBRICANTS CO., INC / P O
Page 68: ALITHICON FM-555 AEROSOL FOOD MACHI
show all

alithicon “fleet” synthetic enclosed gear and transmission lubricants

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?