Please read the following manual carefully before using your ...

1.0 Safety precautions
ATTENTION:
Always attach antennas and adapters without excessive force. To attach
and release SMA connections, ONLY use the included plastic SMA tool
(or similar tools), as it offers an over-torque protection.
Never expose the device to water. Never use it outdoors during rainy weather.
Otherwise, the sensitive electronics could be damaged.
Avoid excessively high temperatures. Do not leave the device on heating radiators,
in direct sunlight or in your car.
Due to the high sensitivity, the sensors and display of this device are sensitive
to shock, hence it should be handled with care. Do not drop the device or antennas,
as they could be damaged or destroyed!
Consequently, we strongly recommend using our special carrycase for
storage and transportation. It is also available as an extremely durable version
made of special plastics (available at an extra charge).
Even though all SPECTRAN models are pretty safe due to their counter-sunk
screws, they should not be kept in the reach of children, as they still might present
a potential threat in this case!
Your measurement device is maintenance-free. Only clean it on the outside with
a wet cloth. Do not use any kind of detergent.
CAUTION:
Avoid overloading the input by applying signals with excessive power as
otherwise, the highly-sensitive circuitry can be destroyed! The maximum
applicable voltage is only 200mV (0.2V). Voltages greater than 1V can destroy
SPECTRAN’s highly sensitive amplification circuitry!
Firmware BETA50 / © 2005-2009 by Aaronia AG, DE-54597 Euscheid, www.aaronia.de 5