NI myDAQ User Guide and Specifications

Using NI myDAQ with Soft Front Panel (SFP)
Instruments
Note Before opening a SFP, make sure that the NI myDAQ device is connected to the
system and is ready to use. After the NI myDAQ is connected to the system, the blue LED
lights, indicating the device is ready for use, and the NI ELVISmx Instrument Launcher
launches automatically.
NI ELVISmx provides soft front panel (SFP) instruments, created in
LabVIEW, and the source code for the instruments. You cannot directly
modify the executable files, but you can modify or enhance the
functionality of these instruments by modifying the LabVIEW code, which
installs in the following location:
• Windows XP/2000:
C:\Documents and Settings\All Users\Shared Documents\
National Instruments\NI ELVISmx Source Code
• Windows 7/Vista:
C:\Users\Public\Documents\National Instruments\
NI ELVISmx Source Code
Note For a detailed explanation of the SFP instruments, instructions for taking a
measurement with each instrument, and information on the other NI ELVISmx Instrument
Launcher features, refer to the NI ELVISmx Help. To access this help file, go to Start»
All Programs»National Instruments»NI ELVISmx for NI ELVIS & NI myDAQ»
NI ELVISmx Help.
NI myDAQ User Guide and Specifications 18 ni.com