FMS 3.9.3 - Davis Instruments Corp.

DriveRight FMS Help
Note: The conversion process can take a long time depending on the size of your 2.x database.
You can interrupt the conversion at any time by clicking the stop button, but this is not
recommended.
8. All the 2.x data has been converted into the new database format for DriveRight FMS.
9. Go to DriveRight FMS and view various tables using the Database Menu commands to
make sure the data has been converted properly.
Back to Getting Started
Home | Getting Started | Quick Reference | Menu Commands | Troubleshooting
Setup Overview
The initial setup of your DriveRight FMS consists of the following operations:
1. Select and Install Database
Before you run the software for the very first time you will need to select the database to be used
with DriveRight FMS. Refer to the Database Selection Guide for information on choosing and
installing a database.
If you select MS Access, DriveRight FMS will install the necessary components during the FMS
installation. If you select MySQL, MSDE, MS SQL Server, or Oracle, you will need to install and
configure the database before installing DriveRight FMS. See Database Selection Guidelines for
more information.
2. Install DriveRight FMS
Insert the DriveRight FMS CD and follow instructions.
3. Initial Program Configuration when you first run DriveRight FMS.
Refer to the DriveRight FMS Getting Started Guide for initial program configuration information.
4. Install the drivers for accessories you want to use.
Install drivers for the SmartCard Desktop Reader and wireless devices if you want to use them.
Refer to the DriveRight FMS Getting Started Guide for instructions on installing the accessory
drivers. See Wireless Device Communication Problems for help with installing or re-installing your
wireless device driver. See SmartCard Reader Device Communication Problems for help with
installing or re-installing your SmartCard Desktop Reader Device driver.
5. Converting DriveRight 2.04, 2.05 & 2.06 Databases
If you have a DriveRight database created using version 2.04, 2.05, or 2.06 of the DriveRight
Vehicle Management Software, it needs to be converted for use with DriveRight FMS. Click this
link to display a help window that explains how to convert these databases (Convert Database)
6. DriveRight FMS Software Setup
Check the following configuration preferences and make any necessary changes:
15