Manual - TP-Link

Figure 5-6 LAG Table
The following entries are displayed on this screen:
‣ Global Config
Aggregate Arithmetic:
Select the applied scope of Aggregate Arithmetic, which
results in choosing a port to transfer the packets.
• SRC MAC + DST MAC: When this option is selected,
the Aggregate Arithmetic will apply to the source and
destination MAC addresses of the packets.
• SRC IP + DST IP: When this option is selected, the
Aggregate Arithmetic will apply to the source and
destination IP addresses of the packets.
‣ LAG Table
Select:
Group Number:
Description:
Member:
Operation:
Select the desired LAG. It is multi-optional.
Displays the LAG number here.
Displays the description of LAG.
Displays the LAG member.
Allows you to view or modify the information for each LAG.
• Edit: Click to modify the settings of the LAG.
• Detail: Click to get the information of the LAG.
Click the Detail button for the detailed information of your selected LAG.
35