AJ Katalog Radik 012006 finish.indd - Seltron

More documents

Recommendations

Info

RADIK GENERAL INFORMATION Guidelines for fitting Multifunctional package Basic guidelines for the installation of steel panel radiators: • centre a window • centre of radiator and of window at the same place • air movement around the radiator should not be restricted We offer an assortment of brackets for RADIK steel panel radiators. That assortment is shown in the KORAMONT catalogue and covers most installers needs and all main construction materials. Its construction allows fitting of the radiator with minimum damage of its packaging (at the place of fitting and connection of necessary parts) and the packaging can be removed after the completion of all construction and other work. We recommend using such fittings for the connection of steel panel radiators as will secure: • regulation of water flow through the radiator • closing off radiator at the inlet and outlet of water flow • emptying and filling of the radiator • disconnecting of radiator without interruption of the heating system operation For mounting of RADIK steel panel radiators of version VENTIL KOMPAKT, we recommend to use KORADO pre-fixing template, which will supply, in every respect, radiators presence at a construction site (see KORAMONT catalogue). Guarantees and Quality The manufacturer guarantees that the product is leak proof and guarantees stated heat output of RADIK steel panel radiators connected to the hot-water systems for 5 years from the date of sale. The manufacturer accepts no responsibility for deformation or damage of the radiators caused during their transport, handling, or storage. The guarantee does not apply to mechanical or other damages caused by unqualified installation of the radiators. RADIK products guarantee the quality, as is documented by certificates issued by LGA Nürnberg (certificate on suitability of radiators for installation in schools and kindergartens) and Engineering Testing Laboratory, SZ no. 202 Brno. The company KORADO, a.s. has held a quality certificate under the norm ISO 9001 since 1997. That quality control system describes in advance all conditions, requirements, and parameters with respect to technical, manufacturing, commercial, transport, and service issues. The customer is the main goal of the entire system and his satisfaction influences the goals and plans of the company KORADO. The ISO 9001:2000 quality control system guarantees the customer excellent, long-lasting quality of products and services. The company reserves the right to make technical changes. 7
RADIK GENERAL INFORMATION – VENTIL KOMPAKT Description RADIK VK, RADIK VKU, RADIK VKL, RADIK COMBI VK, RADIK VKM and RADIK HYGIENE VK models are VENTIL KOMPAKT versions of steel panel radiators with a built-in internal connecting circuit and valve. This construction allows connection of the radiator from the bottom to the heating system. The axial distance of the bottom outlet is always 50 mm and has a G 1/2 internal thread. Its construction is intended for modern heating systems with pressurized circulation of the heating medium and horizontal piping below the radiator in the floor, in the wall, or on the wall covered with a strip. Models VENTIL KOMPAKT version of steel panel radiators is manufactured in several models. The construction of the models varies particularly with respect to the location of the connections and position of the connection pipes. Model Position of connection Description RADIK VK only right on page 15 RADIK VKU right or left on page 16 RADIK VKL only left on page 17 RADIK COMBI VK only right on page 18 RADIK VKM only middle connection on page 20 RADIK HYGIENE VK only right on page 26 Installation of the heating system Modern heating systems require the use of fittings, which will enable the installer to close off the radiator so that it can be changed without interrupting the operating system. The choice of fittings depend on the requirements and the material of the pipes: 1) copper, thin-wall steel, plastic or a plastic-metal-plastic combination • use a compact connecting fitting with a pitch of 50 mm and with reduction of G 1/2 to G 3/4 by setting appropriate clamping screws according to the material and size of connecting pipes 2) black steel pipes with tubular threading • use 2 closing screws Valve At the time of assembly of the radiator a valve is fitted into the built-in internal circuit. It is characterized by the following data: • allows presetting of water flow at six levels • factory preset for position six • to preset to another position a special key is required • if any other preset position is needed, the installer should do it after rinsing the installation but before the heat comes on • the valve is tightened at the factory to their norm • outside connecting thread M 30 x 1.5 • the connecting thread of the valve has a white plastic cover, which gives it protection during transportation and assembly of the radiator and at the same time can be used for setting the valve in the off or on position during assembly 1 2 8 The company reserves the right to make technical changes.
Page 1 and 2: RADIK ® Steel panel radiators CE m
Page 3 and 4: RADIK RADIATORS RADIK - RADIK LINE
Page 5 and 6: RADIK GENERAL INFORMATION Descripti
Page 7: RADIK GENERAL INFORMATION Basic Equ
Page 11 and 12: RADIK GENERAL INFORMATION - VENTIL
Page 13 and 14: RADIK GENERAL INFORMATION - VENTIL
Page 15 and 16: RADIK KLASIK Description RADIK KLAS
Page 17 and 18: RADIK VKU Description RADIK VKU mod
Page 19 and 20: RADIK COMBI VK Description RADIK CO
Page 21 and 22: RADIK VKM Description The conceptio
Page 23 and 24: RADIK PLAN VK Description RADIK PLA
Page 25 and 26: RADIK PLAN VKM Description The type
Page 27 and 28: RADIK HYGIENE VK Description RADIK
Page 29 and 30: RADIK KLASIK, RADIK VK, RADIK VKU,
Page 35 and 36: RADIK VKM HEAT OUTPUT IN WATTS CERT
Page 41 and 42: RADIK COMBI VK HEAT OUTPUT IN WATTS
Page 43 and 44: RADIK PLAN KLASIK, RADIK PLAN VK, R
Page 45 and 46: RADIK PLAN VKM HEAT OUTPUT IN WATTS
Page 47 and 48: RADIK PLAN VKM HEAT OUTPUT IN WATTS
Page 49 and 50: RADIK HYGIENE, HYGIENE VK HEAT OUTP
Page 51 and 52: RADIK BASIC TECHNICAL PARAMETERS RA
Page 53 and 54: RADIK BASIC TECHNICAL PARAMETERS RA
Page 55 and 56: RADIK DATA FOR PLACING ORDERS Descr
Page 57 and 58: SVÚOM PRAHA - INFORMATION That is
Page 59 and 60:
RADIK SERVICES Services for busines
show all

AJ Katalog Radik 012006 finish.indd - Seltron

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?