Trevira CS 100 - NozzFlow - Air Distribution

Specification: FabricAir ® Trevira CS 100 – NozzFlow
Division 15, Section 15800
2005 Master Spec Format (Section/Category): 23 37 16
5. Type 5: One row H-rail/spacer system located 1.5” above 12 o’clock of FabricAir ® system.
Hardware to include H-rail joint, end cap H-rail, spacer, fastener ceiling/H-rail, tie down strap
and H-rail as required. FabricAir ® system to be attached to hardware using one single row of
plastic sliders located 12 o’clock spaced 20 inches.
Hardware options – (please select one)
a. Aluminum Rails – all other components Stainless Steel
b. Aluminum Rails – all other components Galvanized Steel
6. Type 6: Two rows H-rail/spacer system located 1.5” above 3 and 9 o’clock of FabricAir ® system.
Hardware to include H-rail joint, end cap H-rail, spacer, fastener ceiling/H-rail, tie down strap
and H-rail as required. FabricAir ® system to be attached to hardware using two rows of plastic
sliders located 3 and 9 o’clock spaced 20 inches.
Hardware options – (please select one)
a. Aluminum Rails – all other components Stainless Steel
b. Aluminum Rails – all other components Galvanized Steel
7. Type 7: One row H-rail/spacer system located 1.5” above 12 o’clock of FabricAir ® system.
Hardware to include H-rail joint, end cap H-rail, spacer, fastener ceiling/H-rail, tie down strap
and H-rail as required. FabricAir ® system to be attached to hardware using one single row of
bulb edge located 12 o’clock supported entire length.
Hardware options – (please select one)
a. Aluminum Rails – all other components Stainless Steel
b. Aluminum Rails – all other components Galvanized Steel
8. Type 8: One row H-rail/cable system located 1.5” above 12 o’clock of FabricAir ® system.
Hardware to include H-rail joint, eye bolt, end cap H-rail, cable, tie down strap and H-rail as
required. FabricAir ® system to be attached to hardware using one single row of plastic sliders
located 12 o’clock spaced 20 inches.
Hardware options – (please select one)
a. Aluminum Rails – all other components Stainless Steel
b. Aluminum Rails – all other components Galvanized Steel
9. Type 11: Two rows T-rail/lock system fixed directly to ceiling. Hardware to include tie down
strap, T-rail and locking profile as required. FabricAir ® system to be attached to hardware using
two rows of bulb edge located 3 & 9 o’clock.
Hardware options – (please select one)
a. Aluminum Rails – all other components Stainless Steel
b. Aluminum Rails – all other components Galvanized Steel
10. Type 12: Two rows T-rail system fixed directly to ceiling. Hardware to include tie down strap, T-
rail and end lock as required. FabricAir ® system to be attached to hardware using two rows of
sliders located 3 & 9 o’clock.
FabricAir ® Trevira CS 100 - NozzFlow Last up-date: 06/2011
Specification guidelines for FabricAir ® products – subject to change without further notice. Page 4 of 5
For more information, contact: FabricAir, Inc.: info@fabricair.com or Phone: (502) 493 2210