Basacote® Plus 6 month (16-3.5-10) - BASF Asia Pacific
Basacote® Plus 6 month (16-3.5-10) - BASF Asia Pacific
Basacote® Plus 6 month (16-3.5-10) - BASF Asia Pacific
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Controlled Release Fertilisers<br />
Controlled Release Fertilisers<br />
Basacote ® Tabs<br />
6 <strong>month</strong> K (11-3.9-15.8)<br />
TECHNICAL DATA<br />
Primary Nutrients:<br />
11.0% Nitrogen (N)<br />
4.5% NO 3 Nitrogen<br />
6.5% NH 4 Nitrogen<br />
3.9% Phosphorus (P) soluble in neutral ammonium citrate<br />
3.1% P water soluble<br />
15.8% Potassium (K) as potassium sulphate, water soluble<br />
Secondary Nutrients:<br />
1.2% Magnesium (Mg)<br />
0.8% water soluble<br />
7.0% Sulphur (S)<br />
6.0% water soluble<br />
0.02% Boron (B)<br />
0.05% Copper (Cu)<br />
0.23% Iron (Fe)<br />
0.06% Manganese (Mn)<br />
0.015% Molydenum (Mo)<br />
0.02% Zinc (Zn)<br />
Physical Properties:<br />
Granular solid fertiliser, surface-treated,<br />
<strong>10</strong>0% polymer-coated, in cone form<br />
Controlled nutrient release:<br />
The nutrients are released out of the coated granules via diffusion influenced by moisture and<br />
temperature.<br />
The product lasts 5 - 6 <strong>month</strong>s under temperate conditions.<br />
Recommendations for use:<br />
Basacote Tabs 6 <strong>month</strong> K (11-3.9-15.8) contains all nutrients required for healthy growth of plants.<br />
As a result, additional fertiliser applications are not necessary. Application into substrate is<br />
recommended directly before use (maximum storage time <strong>10</strong> days). Distribute the Cones evenly<br />
when potting; press the Cones approximately 3 centimetres into the substrate when topdressing.<br />
The amount of Basacote Tabs 6 <strong>month</strong> K (11-3.9-15.8) applied will vary according to usage pattern,<br />
desired outcome and seasonal influences such as temperature and wet conditions but the below<br />
rates are given as a guide. These recommendations are given as a practical guide to good<br />
agronomic practice under most situations. Local agronomic conditions should also be taken into<br />
account, as these may affect responsiveness of fertiliser application<br />
Suggested application:<br />
Volume in Litres<br />
Rate Cones / pot 2 3 4 5<br />
Container Nursery Stock 1 2 3 3<br />
Potplants 1 2 2 3<br />
The rates are based on potting media not containing added fertilisers and mature plants. One has to<br />
account for nutrients in readymade potting media or soils. Half of the above rates are suggested for<br />
young plants.<br />
For more detailed instructions contact your local Basacote <strong>Plus</strong> agent.<br />
Size:<br />
Approx 7.5g each<br />
Storage Notes:<br />
Store Basacote Tab 6 <strong>month</strong> K (11-3.9-15.8) in a dry location protected from frost, heat and direct<br />
sunlight in the bucket tightly sealed.<br />
A 7.5 g Cone of Basacote Tabs 6 <strong>month</strong> K (11-3.9-15.8) contains<br />
0.9 g Nitrogen (N)<br />
0.3 g Phosphorus (P)<br />
1.2 g Potassium (K)<br />
0.1 g Magnesium (Mg)<br />
Important Information:<br />
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct<br />
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising<br />
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential<br />
loss and damage arising therefrom are not the responsibility of <strong>BASF</strong>. Always check label before use and heed label instructions.<br />
Important Information:<br />
Careful tests have proven that the product is suitable for the recommended purposes when used in accordance with our instructions and is correct<br />
at time of printing. However, since storage, use and external factors are beyond our control and we are unable to foresee all circumstances arising<br />
there from, we are only liable for a consistent quality of the product, but the risk of its storage and use and external factors and all consequential<br />
loss and damage arising therefrom are not the responsibility of <strong>BASF</strong>. Always check label before use and heed label instructions.