AT Command Set for WCDMA Module - wless.ru

More documents

Recommendations

Info

WCDMA Module Example AT&D0 OK AT&D1 OK AT&D2 OK parameters AT&D0: omit DTR signal AT&D1: as the sigale of 108/2 circuit turns OFF, enter on-line command state. AT&D2: as the sigale of 108/2 circuit turns ON, enter command state. 2.4.17 &C: set DCD signal –do not test now Description This command is used to set DCD signal. Format AT&C Example AT&C0 OK AT&C1 OK AT&C2 OK parameters AT&C0: always enabled AT&C1: data transmission enabled AT&C2: disabled only at 1s after data call, enabled all other time. 2.4.18 +IPR: set module’s baud rate Description This command is used to set the module’s baud rate. Format AT+IPR= Example AT+IPR? +IPR: 9600 OK AT+IPR=? +IPR: (),(300,600,1200,2400,4800,9600,19200,38400,57600,115200,230400) OK AT+IPR=38400 OK parameters : baud rate 51
WCDMA Module 2.4.19 &F: restore factory settings Description This command is used to restore factory settings. Format AT&F Example AT&F OK parameters 2.4.20 &W: save defined parameter settings Description This command is used to save current parameter settings. After the execution of this command, the module will save the defined parameters in RAM into FLASH. Format AT&W Example AT&W OK parameters 2.4.21 WS46: select wireless network Description This command is used to select wireless network. Format AT+WS46= Example AT+WS46= OK AT+WS46? AT+WS46=? (list of supported s) parameters : 12 GSM digital cellular 52
Page 1 and 2: WCDMA Module AT Command Set for WCD
Page 3 and 4: WCDMA Module With strong technical
Page 5 and 6: WCDMA Module Contents 1 General Des
Page 7 and 8: WCDMA Module 2.4.20 &W: save define
Page 9 and 10: WCDMA Module 1.2 Abbreviations A AD
Page 11 and 12: WCDMA Module SRAM Static Random Acc
Page 13 and 14: WCDMA Module 2.1.4 +CGMR: inquire s
Page 15 and 16: WCDMA Module 2.1.12 +ZSSPA: inquire
Page 17 and 18: WCDMA Module 2.2 Call Control Comma
Page 19 and 20: WCDMA Module +CSTA: 145 AT+CSTA=? C
Page 21 and 22: WCDMA Module 2.2.11 +CVHU: hang up
Page 23 and 24: WCDMA Module 2.2.16 +CLCC: list cur
Page 25 and 26: WCDMA Module ATS? Check the value o
Page 27 and 28: WCDMA Module 2.2.22 +ZCEND: indicat
Page 29 and 30: WCDMA Module 7: voice call + data s
Page 31 and 32: WCDMA Module 3: register 4: delete
Page 33 and 34: WCDMA Module 2.3 Network Service Co
Page 35 and 36: WCDMA Module Description AT+COPS=?
Page 37 and 38: WCDMA Module Example Parameters AT+
Page 39 and 40: WCDMA Module Parameters set the ad
Page 41 and 42: WCDMA Module Parameters =0 disabled
Page 43 and 44: WCDMA Module Parameters 0 disable
Page 45 and 46: WCDMA Module AT+CSSN=1,1 Call waiti
Page 47 and 48: WCDMA Module 0 do not reset the mo
Page 49 and 50: WCDMA Module 2.4.8 +CLAC: list all
Page 51: WCDMA Module 1: ON : (volume) 0: N
Page 55 and 56: WCDMA Module Format Example Paramet
Page 57 and 58: WCDMA Module AT+CMGF=1 OK AT+CMGL=?
Page 59 and 60: WCDMA Module :message index :TPDU 8
Page 61 and 62: WCDMA Module TEXT mode :the name of
Page 63 and 64: WCDMA Module Parameters at+cmgf=1 S
Page 65 and 66: WCDMA Module ME received messages a
Page 69 and 70: WCDMA Module Parameters +CSCB: 0, "
Page 71 and 72: WCDMA Module 1:support the type 2.5
Page 75 and 76: WCDMA Module parameters OK : 0: do
Page 77 and 78: WCDMA Module parameters integral t
Page 79 and 80: WCDMA Module 2.7 PACKET DOMAIN 2.7.
Page 81 and 82: WCDMA Module Used to designate the
Page 83 and 84: WCDMA Module 2.7.4 +CGATT GPRS Atta
Page 85 and 86: WCDMA Module Character type parame
Page 87: WCDMA Module 2.7.10 +CGSMS select s

AT Command Set for WCDMA Module - wless.ru

Create successful ePaper yourself

Delete template?

Save as template?