AT Command Set for WCDMA Module - wless.ru

WCDMA Module
2.5.18 +CMTI: received messages saved in memory
Description This indicates the message has been received and will be saved into the
memory according to the information storage parameter in (+CNMI).
Format +CMTI:, OK
ERROR
Example AT+CNMI=1,1,0,0,0
OK
AT+CMGF=1
OK
+CMTI: "SR",32
Set as message receiving and storaging
mode
Set as TEXT mode
Received messages will be saved in
“SR” 32 entries
Parameters :NVRAM storage area(usually, the response is “MT”)
:information saving location
2.5.19 +ZMGF: messages full
Description The information indicates the message center is trying to send a message to the module
but was rejected because the message memory is full. Need use AT+CMGD command to
delete some messages.
Format +ZMGF:n
Example +ZMGF Indicates there is new message, but rejected.
n: indicating the message memory is full.
1:WMS_MEMORY_STORE_RAM_GW
parameters 2:WMS_MEMORY_STORE_SIM
3:WMS_MEMORY_STORE_NV_GW
1 and 3 could be viewed as mobile phone, and 2 could be viewed as module.
2.5.20 +CSDH: display text mode
Description
Format
Example
The command is used to control whether to display the detailed header value in TEXT
mode result code.
+CSDH=[]
AT+CSDH=0
Set the parameter as 0
OK
AT+CSDH?
Check the current parameters
+CSDH: 0
OK
AT+CSDH=?
List the range of parameters
+CSDH: (0-1)
73