AT Command Set for WCDMA Module - wless.ru

WCDMA Module
send to TE. The alert caused by other data code format is defined in =1.
:the regulation for saved cell broadcast message CBM is determined by its
data code format (see 3GPP TS23.038),and use +CSCB to select CBM type
and for value, please refer to 3GPP TS 27.005 table 3)
0:No CBM alert sent to TE.
1: if CBM is stored in ME/TA, use the result code to send the memory location to
TE.
+CBMI: ,
2: send new CBM directly to TE.
• +CBM: (PDU mode)
• +CBM: ,,,,
(TEXT mode)
• If ME supports data coding group, ME select not to send these
data code formats to TE.
3: Class 3 CBM Use the result code (defined in =2)and directly send to TE.
If it supports CBM storage, the alert caused by other type of information is
defined in =1.
: message status report
0: no message status report sent to TE.
1:send message status report to TE:
+CDS: (PDU mode)
+CDS: ,,[],[],,, (TEXT mode)
2:if the message status report is saved in ME/TA, send the memory location to
TE:
+CDSI:,
: define the method of cache saving result code( 1, 2 or 3).
0: as is set as 1..3, the code saved in TA will be sent to TE (return OK
pirio to transmitting the code).
1: as is set as 1..3, the code saved in TA will be erased.
2.5.9 +CPMS: preferred SMS memory
Description
Format
The setting command is used to select , and to read,
write, etc. If the selected memory is not suitable for ME (but TA supports), return
the result code +CMS ERROR: . See the failure result code appendix.
The testing command is used to display the memory list supported by TA.
+CPMS=[,
+CPMS:
mem2>[,]]
,,,,,
+CMS ERROR:
65