Using IBM LTO Ultrium with Open Systems - RS/6000 Home

More documents

Recommendations

Info

3-8 First zone with both HBA in the zone. . . . . . . . . . . . . . . . . . . . . . . . . . 104 3-9 WWN of the SDG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 3-10 Start Zone Admin panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 3-11 Create alias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 3-12 Define zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 3-13 Define zone configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 3-14 3584 with 8 FC LTO drives, one server with 2 HBA and 2 zones . . . . 111 3-15 Lab configuration with Sun server and 3583 . . . . . . . . . . . . . . . . . . . . 112 3-16 Lab configuration with one 3583 and one 3570 . . . . . . . . . . . . . . . . . . 113 3-17 One SDG is missing during boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 3-18 Binding with QLogic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 3-19 Binding with Emulex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 3-20 Connected to the SDG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 3-21 Install of the SDG StorWatch Specialist. . . . . . . . . . . . . . . . . . . . . . . . 130 3-22 SDG StorWatch Specialist - server application . . . . . . . . . . . . . . . . . . 131 3-23 SDG StorWatch connect to server. . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 3-24 SDG StorWatch logon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 3-25 Connect to SDG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 3-26 Install firmware on the SDG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 3-27 Select the SCSI option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 3-28 SCSI Channel parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 3-29 Select the Fibre Channel options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 3-30 Fibre Channel parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 3-31 Basic SCSI connection to a system . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 3-32 SAN Data Gateway attached through Fibre Channel — host view . . . 138 3-33 Select Device Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 3-34 Device Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 3-35 Device Mapping required a reboot . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 3-36 Select Channel Zoning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 3-37 Channel Zoning settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 4-1 Tivoli Storage Manager supported platforms . . . . . . . . . . . . . . . . . . . . 148 4-2 TSM library sharing overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 4-3 TSM LAN-free data transfer overview . . . . . . . . . . . . . . . . . . . . . . . . . 152 4-4 SCSI element number of tape drives in the 3584 . . . . . . . . . . . . . . . . 156 4-5 SCSI element number of tape drives in the 3583 . . . . . . . . . . . . . . . . 156 4-6 Our lab library sharing environment. . . . . . . . . . . . . . . . . . . . . . . . . . . 174 4-7 LAN-free backup lab example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182 4-8 3584 with multiple control paths enabled. . . . . . . . . . . . . . . . . . . . . . . 189 5-1 System administration login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 5-2 NetBackup DataCenter assistant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 5-3 System administration main window . . . . . . . . . . . . . . . . . . . . . . . . . . 209 5-4 Media and device management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 5-5 Select hosts to scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 10 Using IBM LTO Ultrium with Open Systems
5-6 Display detected drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 5-7 Display discovered devices configuration . . . . . . . . . . . . . . . . . . . . . . 211 5-8 Updating device configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 5-9 Configure storage units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 5-10 Show defined drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 5-11 Setup robot inventory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214 5-12 Media Manager with configured volumes . . . . . . . . . . . . . . . . . . . . . . 216 5-13 Storage unit configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 217 5-14 Storage unit properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 5-15 Add a new backup class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 5-16 Enter backup class name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 5-17 Backup policy configuration wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 5-18 Select clients and OS for backup class . . . . . . . . . . . . . . . . . . . . . . . . 220 5-19 Display client list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 5-20 Configure backup directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 5-21 Configure backup type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 5-22 Configure schedule rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 5-23 Define backup start windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 5-24 Display backup class . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 5-25 Backup class attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 5-26 Initiate client backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 5-27 Configure client backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 5-28 Monitor backup job details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 5-29 End of backup job status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 5-30 Restoring files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 5-31 Display drives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 5-32 Change drive attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 6-1 Specify source window of the software installation GUI interface . . . . 247 6-2 Select Legato NetWorker package . . . . . . . . . . . . . . . . . . . . . . . . . . . 247 6-3 Subproducts selection window of the software install dialog . . . . . . . . 248 6-4 Install window after the successful package installation . . . . . . . . . . . 248 6-5 Legato NetWorker administration GUI . . . . . . . . . . . . . . . . . . . . . . . . . 262 6-6 Jukeboxes window for the LTO tape library . . . . . . . . . . . . . . . . . . . . . 263 6-7 Configuring a new tape device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 6-8 Legato NetWorker Dynamic Drive Sharing (DDS) example. . . . . . . . . 266 6-9 How Legato NetWorker autochanger sharing works . . . . . . . . . . . . . . 267 6-10 Jukebox labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 6-11 Inventorying the library. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 B-1 3583 Storwatch Specialist SNMP MIB download panel. . . . . . . . . . . . 281 B-2 3583 Storwatch Specialist: configuring SNMP. . . . . . . . . . . . . . . . . . . 282 B-3 Tivoli NetView SNMP monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 B-4 3584 Operator Panel: SNMP settings . . . . . . . . . . . . . . . . . . . . . . . . . 284 B-5 3584 Operator Panel: enable/disable SNMP . . . . . . . . . . . . . . . . . . . . 284 Figures 11
Page 1: Front cover Using IBM LTO Ultrium w
Page 4 and 5: Take Note! Before using this inform
Page 6 and 7: 2.2.2 Installation using the SMIT i
Page 8 and 9: 4.5 TSM and 3584 redundant library
Page 10 and 11: 8 Using IBM LTO Ultrium with Open S
Page 14 and 15: B-6 3584 Operator Panel: set destin
Page 16 and 17: 14 Using IBM LTO Ultrium with Open
Page 18 and 19: Marco Ceresoli is a Consulting I/T
Page 20 and 21: IBM trademarks The following terms
Page 22 and 23: 2 Using IBM LTO Ultrium with Open S
Page 24 and 25: 1.1 LTO overview This section will
Page 26 and 27: ► ► HP-UX Fibre Channel attachm
Page 28 and 29: Figure 1-2 The LTO Ultrium product
Page 30 and 31: ► IBM 3581-H17 has a High-Voltage
Page 32 and 33: You can specify the SDG feature whe
Page 34 and 35: Alternatively, a 30 I/O station can
Page 36 and 37: Note: The quantity depends on wheth
Page 38 and 39: 1.3.2 ISV storage management softwa
Page 40 and 41: Figure 1-9 RS/6000 LTO support matr
Page 42 and 43: Figure 1-10 Extract from SAN SDG 21
Page 44 and 45: To ensure best performance, if poss
Page 46 and 47: ► Tape device IBM device driver o
Page 48 and 49: can be found in either of two ways.
Page 50 and 51: 2.1 Installing library and device d
Page 52 and 53: This link is specific for the 3583
Page 54 and 55: Adding catalogs... Adding trace tem
Page 56 and 57: ► This command configures all dev
Page 58 and 59: 2.2.6 Deleting LTO devices In some
Page 60 and 61: osboot: Boot image is 8437 512 byte
Page 62 and 63:
Example 2-9 IBMtape install output
Page 64 and 65:
Important: For every SDG attached t
Page 66 and 67:
Now you can easily modify again IBM
Page 68 and 69:
usr/include/sys/smc.h /usr/include/
Page 70 and 71:
Note: If an earlier version of the
Page 72 and 73:
Figure 2-1 System Administration Ma
Page 74 and 75:
2.4.3 Verifying the Atdd driver ins
Page 76 and 77:
opt/OMImag/bin/atdd_cfg -s COMPRESS
Page 78 and 79:
2.5 Testing the library with tapeut
Page 80 and 81:
http://www.storage.ibm.com/hardsoft
Page 82 and 83:
Here you find a list of supported H
Page 84 and 85:
Example 2-24 Smit AIX HBA character
Page 86 and 87:
Note: The .Z file extension must be
Page 88 and 89:
2.8.3 QLogic QLA2200 HBA driver rem
Page 90 and 91:
And for LP8000S adapter (Sbus) chec
Page 92 and 93:
usr/include/fcdiag.h /usr/lib/libHB
Page 94 and 95:
This package contains scripts which
Page 96 and 97:
It is available at no charge for cu
Page 98 and 99:
Configuration Firmware Diagnostic f
Page 100 and 101:
Figure 2-9 3583 Specialist: diagnos
Page 102 and 103:
Panel0175 Ethernet ________________
Page 104 and 105:
Settings Service Insert Cleaning Ca
Page 106 and 107:
Figure 2-14 3854 Specialist: Logica
Page 108 and 109:
2.10 Updating library, drive and RM
Page 110 and 111:
6. The 3583 Tape Library operator p
Page 112 and 113:
Figure 2-18 Ultrium Tape Library Sp
Page 114 and 115:
3.1 SAN design considerations for L
Page 116 and 117:
Tip: If you have problems connectin
Page 118 and 119:
Our suggestion for achieving the be
Page 120 and 121:
3.2 Zoning Zoning allows you to par
Page 122 and 123:
characteristics are automatically a
Page 124 and 125:
Figure 3-8 First zone with both HBA
Page 126 and 127:
Get WWN of HBA on Solaris Our Solar
Page 128 and 129:
We will create an alias for the WWN
Page 130 and 131:
If needed, create a new zone config
Page 132 and 133:
Note: For performance reasons, we s
Page 134 and 135:
After executing either drvconfig or
Page 136 and 137:
SUN Server Medium Changer 3583 Lxx
Page 138 and 139:
Example 3-12 Output of ls -la after
Page 140 and 141:
# adapter instance 1, the entry wil
Page 142 and 143:
Example 3-14 Configuration file for
Page 144 and 145:
You see the indication (FCP) at the
Page 146 and 147:
► ► ► ► Installation and us
Page 148 and 149:
Example 3-19 setHost for FC 4 to AI
Page 150 and 151:
Install on Sun Solaris Download the
Page 152 and 153:
Figure 3-23 SDG StorWatch connect t
Page 154 and 155:
Figure 3-27 Select the SCSI option
Page 156 and 157:
Figure 3-30 Fibre Channel parameter
Page 158 and 159:
Server FC Aapter FC SCSI Drive 0 SC
Page 160 and 161:
Figure 3-34 Device Mapping You can
Page 162 and 163:
Figure 3-37 Channel Zoning settings
Page 164 and 165:
Machine Type and Model......ULT3580
Page 166 and 167:
146 Using IBM LTO Ultrium with Open
Page 168 and 169:
4.1 Tivoli Storage Manager overview
Page 170 and 171:
Client A client is a computer syste
Page 172 and 173:
LAN-free data transfer LAN-free dat
Page 174 and 175:
4.2.2 Configure non-shared tape lib
Page 176 and 177:
Figure 4-4 SCSI element number of t
Page 178 and 179:
Because the 3583 does not have auto
Page 180 and 181:
For library_name, enter the name of
Page 182 and 183:
4.2.4 Configure non-shared tape lib
Page 184 and 185:
Drive State .................... No
Page 186 and 187:
Compression in general improves bac
Page 188 and 189:
Overflow Location: Cache Migrated F
Page 190 and 191:
09/01/01 18:49:11 ANR0984I Process
Page 192 and 193:
LIBVOLUME LTO_3583 STATUS=CLEANER C
Page 194 and 195:
You can download the latest code fi
Page 196 and 197:
4.3.2 Configuring the Library Clien
Page 198 and 199:
Configure drives on an AIX Library
Page 200 and 201:
LTO_3583 ABA925 Private SICILY 4,13
Page 202 and 203:
A core component of LAN-free techno
Page 204 and 205:
Step On Server On Client 10) ......
Page 206 and 207:
Then on SICILY, we map SOL-E’s vi
Page 208 and 209:
Check also the performance panel fr
Page 210 and 211:
In TSM you should configure only on
Page 212 and 213:
5.1 VERITAS NetBackup DataCenter ov
Page 214 and 215:
5.2.2 Device drivers NetBackup Data
Page 216 and 217:
Since this will be a Master Server,
Page 218 and 219:
4. DataGeneral 5. HP9000 6. INTEL (
Page 220 and 221:
Checking for a bpjava-msvc entry in
Page 222 and 223:
Saving existing binaries before pat
Page 224 and 225:
lrwxrwxrwx 1 root root 45 Oct 8 11:
Page 226 and 227:
5.3.2 Scan for tape devices Once we
Page 228 and 229:
Figure 5-2 NetBackup DataCenter ass
Page 230 and 231:
Click the magic wand button (sixth
Page 232 and 233:
Figure 5-8 Updating device configur
Page 234 and 235:
Figure 5-11 Setup robot inventory T
Page 236 and 237:
Generating list of recommended chan
Page 238 and 239:
Figure 5-14 Storage unit properties
Page 240 and 241:
Now we select the client names to b
Page 242 and 243:
Figure 5-20 Configure backup direct
Page 244 and 245:
Figure 5-22 Configure schedule rota
Page 246 and 247:
To make further customizations, dou
Page 248 and 249:
Figure 5-27 Configure client backup
Page 250 and 251:
Figure 5-29 End of backup job statu
Page 252 and 253:
Figure 5-31 Display drives Right cl
Page 254 and 255:
To avoid this issue, you can only u
Page 256 and 257:
6.1 Legato NetWorker overview The L
Page 258 and 259:
6.3.1 Software installation (AIX) W
Page 260 and 261:
oot 19064 1 0 15:37:57 - 0:00 /bin/
Page 262 and 263:
3 LGTOlicm NetWorker for Solaris (B
Page 264 and 265:
Important: You can only use non rew
Page 266 and 267:
Before using the Legato NetWorker w
Page 268 and 269:
5. Double click the line that displ
Page 270 and 271:
6.7 Implementation in AIX environme
Page 272 and 273:
Do you want automated device cleani
Page 274 and 275:
scsidev@2.1.1:IBM ULT3583-TL 2.50|A
Page 276 and 277:
Autoloader or the 3583 Ultrium Scal
Page 278 and 279:
Here you see the devices recognized
Page 280 and 281:
Important: You can only use non rew
Page 282 and 283:
Figure 6-5 Legato NetWorker adminis
Page 284 and 285:
Open the NetWorker administration p
Page 286 and 287:
Note: DDS is only supported in a SA
Page 288 and 289:
When running jbconfig, you will be
Page 290 and 291:
Figure 6-11 Inventorying the librar
Page 292 and 293:
Command errpt -a lslpp -l Atape.dri
Page 294 and 295:
Command pmode tur writebuf sjirjc D
Page 296 and 297:
4. Enter 3 (Device Info). 5. Enter
Page 298 and 299:
Media Inverted ................. No
Page 300 and 301:
Simple Network Management Protocol
Page 302 and 303:
Go to the 3583 specialist Configura
Page 304 and 305:
Panel 0175 Ethernet _______________
Page 306 and 307:
Panel 0169 Set Remote Port ________
Page 308 and 309:
Attention: You must stop all I/O be
Page 310 and 311:
# time dd if=/software/lto/rbs01.db
Page 312 and 313:
IBM LTO tape libraries attached to
Page 314 and 315:
network In contrast, AIX, NT, and S
Page 316 and 317:
terminator IBM pSeries (RS/6000) HA
Page 318 and 319:
Configuring the 3584 with multiple
Page 320 and 321:
3. Click the drop-down box and sele
Page 322 and 323:
Figure C-9 3854 StorWatch Specialis
Page 324 and 325:
Panel 0103 Configuration Summary __
Page 326 and 327:
Figure C-13 3854 StorWatch Speciali
Page 328 and 329:
Panel 0101 Configuration __________
Page 330 and 331:
desired quantity of storage slots d
Page 332 and 333:
Page 334 and 335:
► ► ► ► ► ► TSM for Sun
Page 336 and 337:
Page 338 and 339:
The following terms are trademarks
Page 340 and 341:
TSM VHDCI VPN VPS WWN WWNN WWPN Tiv
Page 342 and 343:
no rewind device 31 serial numbers
Page 344 and 345:
LVD model 9 M mapped drive consider
Page 346 and 347:
ltid 203 robtest 233 s77betbackup 2
Page 350:
Back cover ® Using IBM LTO Ultrium
show all

Using IBM LTO Ultrium with Open Systems - RS/6000 Home

Create successful ePaper yourself

Delete template?

Save as template?