Using IBM LTO Ultrium with Open Systems - RS/6000 Home

More documents

Recommendations

Info

Note: The quantity depends on whether the Capacity Expansion Feature is installed, whether the upper and lower I/O stations are used, and the number of drives installed in a frame. 1.3 Hardware and operating system platforms This section will document the hardware platforms, and the operating systems platforms that support the LTO family. 1.3.1 Hardware server platforms The LTO products are supported on the following hardware server platforms: ► IBM iSeries, AS/400 ► IBM pSeries, RS/6000, SP ► IBM xSeries and other, Intel Based (Netfinity, Windows NT, Windows 2000) ► Sun SPARC ► Hewlett-Packard ► Linux ► And other open systems using SCSI attachment or Fibre Channel attachment For specifics of which Ultrium models support which attachment, see the following Web sites. http://www.storage.ibm.com/hardsoft/tape/3580/3580opn.html http://www.storage.ibm.com/hardsoft/tape/3581/3581opn.html http://www.storage.ibm.com/hardsoft/tape/3583/3583opn.html http://www.storage.ibm.com/hardsoft/tape/3584/3584opn.html Attention: Always check the Web site for the most current detailed and accurate information. As an extract from the supported Web sites, Table 1-1 shows the supported attachments for the 3583 Ultrium Scalable Tape Library on AIX, Solaris and HP-UX. There are a number of provisos associated with various combinations and HBAs this support which are listed on the Web site. 16 Using IBM LTO Ultrium with Open Systems
Table 1-1 3583 SCSI and FC supported server and operating systems Servers Operating Systems Host Adapters Fabric Support HP systems HP 9000 Series A, L, N Class HP-UX 11.0 HP HP4800A HVD Ult HP5149A LVD Ult2 HP5150A LVD Ult2 Previewed pSeries and RS/6000 Servers that support the listed host bus adapters AIX 4.3.2 and higher 4.3.3 and higher IBM FC 6204 HVD Ult FC 6207 HVD Ult FC 6205 LVD Ult2 Integrated LVD IBM 2108 R03 FC 2840 (LVD) FC 2830 (HVD) 2108 G07 FC 2214 (HVD) pSeries and RS/6000 with SAN data Gateway Module Feature 8005 Servers that support the listed host adapters AIX 4.3.3 and higher IBM FC 6227 1 FC 6228 1 IBM 2109 Models S08 and S16 (1) These Gigabit Fibre Channel Adapters are only supported by the LTO Ultrium Fibre Drive feature 8005 in 3583 Scalable Tape Library, and requires a minimum of AIX 4.3 Sun Systems Sun SPARC, UltraSparc, and Ultra/Enterprise Servers that support the listed host adapters Solaris 2.6, 7 and 8 Sun x1065A HVD Ult (Sbus) X6541A HVD Ult (PCI) IBM 2108 R03 FC 2840 (LVD) FC 2830 (HVD) 2108 G07 FC 2214 (HVD Sun Systems with SAN data Gateway Module Feature 8005 Sun SPARC, UltraSparc, and Ultra/Enterprise Servers that support the listed host adapters Solaris 2.6, 7 and 8 Qlogic QLA2200F 1 Emulex LP8000 Emulex LP8000S IBM 2109 Models S08 and S16 (1) The Qlogic adapter is only supported by the LTO Ultrium Fabric Drive feature 8005 in the 3583 scalable tape library. Chapter 1. Introduction to LTO Ultrium with UNIX 17
Page 1: Front cover Using IBM LTO Ultrium w
Page 4 and 5: Take Note! Before using this inform
Page 6 and 7: 2.2.2 Installation using the SMIT i
Page 8 and 9: 4.5 TSM and 3584 redundant library
Page 10 and 11: 8 Using IBM LTO Ultrium with Open S
Page 12 and 13: 3-8 First zone with both HBA in the
Page 14 and 15: B-6 3584 Operator Panel: set destin
Page 16 and 17: 14 Using IBM LTO Ultrium with Open
Page 18 and 19: Marco Ceresoli is a Consulting I/T
Page 20 and 21: IBM trademarks The following terms
Page 22 and 23: 2 Using IBM LTO Ultrium with Open S
Page 24 and 25: 1.1 LTO overview This section will
Page 26 and 27: ► ► HP-UX Fibre Channel attachm
Page 28 and 29: Figure 1-2 The LTO Ultrium product
Page 30 and 31: ► IBM 3581-H17 has a High-Voltage
Page 32 and 33: You can specify the SDG feature whe
Page 34 and 35: Alternatively, a 30 I/O station can
Page 38 and 39: 1.3.2 ISV storage management softwa
Page 40 and 41: Figure 1-9 RS/6000 LTO support matr
Page 42 and 43: Figure 1-10 Extract from SAN SDG 21
Page 44 and 45: To ensure best performance, if poss
Page 46 and 47: ► Tape device IBM device driver o
Page 48 and 49: can be found in either of two ways.
Page 50 and 51: 2.1 Installing library and device d
Page 52 and 53: This link is specific for the 3583
Page 54 and 55: Adding catalogs... Adding trace tem
Page 56 and 57: ► This command configures all dev
Page 58 and 59: 2.2.6 Deleting LTO devices In some
Page 60 and 61: osboot: Boot image is 8437 512 byte
Page 62 and 63: Example 2-9 IBMtape install output
Page 64 and 65: Important: For every SDG attached t
Page 66 and 67: Now you can easily modify again IBM
Page 68 and 69: usr/include/sys/smc.h /usr/include/
Page 70 and 71: Note: If an earlier version of the
Page 72 and 73: Figure 2-1 System Administration Ma
Page 74 and 75: 2.4.3 Verifying the Atdd driver ins
Page 76 and 77: opt/OMImag/bin/atdd_cfg -s COMPRESS
Page 78 and 79: 2.5 Testing the library with tapeut
Page 80 and 81: http://www.storage.ibm.com/hardsoft
Page 82 and 83: Here you find a list of supported H
Page 84 and 85: Example 2-24 Smit AIX HBA character
Page 86 and 87:
Note: The .Z file extension must be
Page 88 and 89:
2.8.3 QLogic QLA2200 HBA driver rem
Page 90 and 91:
And for LP8000S adapter (Sbus) chec
Page 92 and 93:
usr/include/fcdiag.h /usr/lib/libHB
Page 94 and 95:
This package contains scripts which
Page 96 and 97:
It is available at no charge for cu
Page 98 and 99:
Configuration Firmware Diagnostic f
Page 100 and 101:
Figure 2-9 3583 Specialist: diagnos
Page 102 and 103:
Panel0175 Ethernet ________________
Page 104 and 105:
Settings Service Insert Cleaning Ca
Page 106 and 107:
Figure 2-14 3854 Specialist: Logica
Page 108 and 109:
2.10 Updating library, drive and RM
Page 110 and 111:
6. The 3583 Tape Library operator p
Page 112 and 113:
Figure 2-18 Ultrium Tape Library Sp
Page 114 and 115:
3.1 SAN design considerations for L
Page 116 and 117:
Tip: If you have problems connectin
Page 118 and 119:
Our suggestion for achieving the be
Page 120 and 121:
3.2 Zoning Zoning allows you to par
Page 122 and 123:
characteristics are automatically a
Page 124 and 125:
Figure 3-8 First zone with both HBA
Page 126 and 127:
Get WWN of HBA on Solaris Our Solar
Page 128 and 129:
We will create an alias for the WWN
Page 130 and 131:
If needed, create a new zone config
Page 132 and 133:
Note: For performance reasons, we s
Page 134 and 135:
After executing either drvconfig or
Page 136 and 137:
SUN Server Medium Changer 3583 Lxx
Page 138 and 139:
Example 3-12 Output of ls -la after
Page 140 and 141:
# adapter instance 1, the entry wil
Page 142 and 143:
Example 3-14 Configuration file for
Page 144 and 145:
You see the indication (FCP) at the
Page 146 and 147:
► ► ► ► Installation and us
Page 148 and 149:
Example 3-19 setHost for FC 4 to AI
Page 150 and 151:
Install on Sun Solaris Download the
Page 152 and 153:
Figure 3-23 SDG StorWatch connect t
Page 154 and 155:
Figure 3-27 Select the SCSI option
Page 156 and 157:
Figure 3-30 Fibre Channel parameter
Page 158 and 159:
Server FC Aapter FC SCSI Drive 0 SC
Page 160 and 161:
Figure 3-34 Device Mapping You can
Page 162 and 163:
Figure 3-37 Channel Zoning settings
Page 164 and 165:
Machine Type and Model......ULT3580
Page 166 and 167:
146 Using IBM LTO Ultrium with Open
Page 168 and 169:
4.1 Tivoli Storage Manager overview
Page 170 and 171:
Client A client is a computer syste
Page 172 and 173:
LAN-free data transfer LAN-free dat
Page 174 and 175:
4.2.2 Configure non-shared tape lib
Page 176 and 177:
Figure 4-4 SCSI element number of t
Page 178 and 179:
Because the 3583 does not have auto
Page 180 and 181:
For library_name, enter the name of
Page 182 and 183:
4.2.4 Configure non-shared tape lib
Page 184 and 185:
Drive State .................... No
Page 186 and 187:
Compression in general improves bac
Page 188 and 189:
Overflow Location: Cache Migrated F
Page 190 and 191:
09/01/01 18:49:11 ANR0984I Process
Page 192 and 193:
LIBVOLUME LTO_3583 STATUS=CLEANER C
Page 194 and 195:
You can download the latest code fi
Page 196 and 197:
4.3.2 Configuring the Library Clien
Page 198 and 199:
Configure drives on an AIX Library
Page 200 and 201:
LTO_3583 ABA925 Private SICILY 4,13
Page 202 and 203:
A core component of LAN-free techno
Page 204 and 205:
Step On Server On Client 10) ......
Page 206 and 207:
Then on SICILY, we map SOL-E’s vi
Page 208 and 209:
Check also the performance panel fr
Page 210 and 211:
In TSM you should configure only on
Page 212 and 213:
5.1 VERITAS NetBackup DataCenter ov
Page 214 and 215:
5.2.2 Device drivers NetBackup Data
Page 216 and 217:
Since this will be a Master Server,
Page 218 and 219:
4. DataGeneral 5. HP9000 6. INTEL (
Page 220 and 221:
Checking for a bpjava-msvc entry in
Page 222 and 223:
Saving existing binaries before pat
Page 224 and 225:
lrwxrwxrwx 1 root root 45 Oct 8 11:
Page 226 and 227:
5.3.2 Scan for tape devices Once we
Page 228 and 229:
Figure 5-2 NetBackup DataCenter ass
Page 230 and 231:
Click the magic wand button (sixth
Page 232 and 233:
Figure 5-8 Updating device configur
Page 234 and 235:
Figure 5-11 Setup robot inventory T
Page 236 and 237:
Generating list of recommended chan
Page 238 and 239:
Figure 5-14 Storage unit properties
Page 240 and 241:
Now we select the client names to b
Page 242 and 243:
Figure 5-20 Configure backup direct
Page 244 and 245:
Figure 5-22 Configure schedule rota
Page 246 and 247:
To make further customizations, dou
Page 248 and 249:
Figure 5-27 Configure client backup
Page 250 and 251:
Figure 5-29 End of backup job statu
Page 252 and 253:
Figure 5-31 Display drives Right cl
Page 254 and 255:
To avoid this issue, you can only u
Page 256 and 257:
6.1 Legato NetWorker overview The L
Page 258 and 259:
6.3.1 Software installation (AIX) W
Page 260 and 261:
oot 19064 1 0 15:37:57 - 0:00 /bin/
Page 262 and 263:
3 LGTOlicm NetWorker for Solaris (B
Page 264 and 265:
Important: You can only use non rew
Page 266 and 267:
Before using the Legato NetWorker w
Page 268 and 269:
5. Double click the line that displ
Page 270 and 271:
6.7 Implementation in AIX environme
Page 272 and 273:
Do you want automated device cleani
Page 274 and 275:
scsidev@2.1.1:IBM ULT3583-TL 2.50|A
Page 276 and 277:
Autoloader or the 3583 Ultrium Scal
Page 278 and 279:
Here you see the devices recognized
Page 280 and 281:
Important: You can only use non rew
Page 282 and 283:
Figure 6-5 Legato NetWorker adminis
Page 284 and 285:
Open the NetWorker administration p
Page 286 and 287:
Note: DDS is only supported in a SA
Page 288 and 289:
When running jbconfig, you will be
Page 290 and 291:
Figure 6-11 Inventorying the librar
Page 292 and 293:
Command errpt -a lslpp -l Atape.dri
Page 294 and 295:
Command pmode tur writebuf sjirjc D
Page 296 and 297:
4. Enter 3 (Device Info). 5. Enter
Page 298 and 299:
Media Inverted ................. No
Page 300 and 301:
Simple Network Management Protocol
Page 302 and 303:
Go to the 3583 specialist Configura
Page 304 and 305:
Panel 0175 Ethernet _______________
Page 306 and 307:
Panel 0169 Set Remote Port ________
Page 308 and 309:
Attention: You must stop all I/O be
Page 310 and 311:
# time dd if=/software/lto/rbs01.db
Page 312 and 313:
IBM LTO tape libraries attached to
Page 314 and 315:
network In contrast, AIX, NT, and S
Page 316 and 317:
terminator IBM pSeries (RS/6000) HA
Page 318 and 319:
Configuring the 3584 with multiple
Page 320 and 321:
3. Click the drop-down box and sele
Page 322 and 323:
Figure C-9 3854 StorWatch Specialis
Page 324 and 325:
Panel 0103 Configuration Summary __
Page 326 and 327:
Figure C-13 3854 StorWatch Speciali
Page 328 and 329:
Panel 0101 Configuration __________
Page 330 and 331:
desired quantity of storage slots d
Page 332 and 333:
Page 334 and 335:
► ► ► ► ► ► TSM for Sun
Page 336 and 337:
Page 338 and 339:
The following terms are trademarks
Page 340 and 341:
TSM VHDCI VPN VPS WWN WWNN WWPN Tiv
Page 342 and 343:
no rewind device 31 serial numbers
Page 344 and 345:
LVD model 9 M mapped drive consider
Page 346 and 347:
ltid 203 robtest 233 s77betbackup 2
Page 350:
Back cover ® Using IBM LTO Ultrium
show all

Using IBM LTO Ultrium with Open Systems - RS/6000 Home

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?