Switch-Mode and Uninterruptible Power Supplies, Electronic Fuses ...

Contact modules and plug connectors
Fuse plug-in connector
Max. power loss for G fuse terminals
in accordance with IEC 60947-7-3:
• Overload protection: 1.6 W (at 1.5 x IN)
• Short-circuit protection: 4 W (at 1.5 x IN)
Max. power loss per fuse at 23 °C Tu.
Do not exceed the max. power loss when selecting fuse
cartridges. When a fuse is defective, the subsequent circuit
is not voltage free.
PTSI 4 / PTSI 4/ LD
{
IP 65 switched-mode power supply /
Electrical cabinet socket outlet
for AC applications
for DC applications
A practical tip:
Space for spare fuses
Technical data
Rated data according to IEC 60947-7-3
Rated cross-section
Rated voltage/Rated current (as disconnect terminal)
Rated impulse voltage
General data
Cartridge fuse
Outage display
Type of mounting
Insulation material/material colour
UL 94 flammability class
Continuous operating temp., min.-max.
Outgoing direction of conductor
Test point
Can be coded
Conductor connection system
No. of poles
Number of connections / pole
Clamping capacity, PUSH IN connection
Clamping range, min.-max.
Solid, min.-max.
Stranded, min.-max.
Flexible, min.-max.
Flexible, wire end ferrule 8 mm, DIN 46228/1, min.-max.
Flexible, wire end ferrule 8 mm, DIN 46228/4, min.-max.
Flexible, wire end ferrule 12 mm, DIN 46228/1, min.-max.
Flexible, wire end ferrule 12 mm, DIN 46228/4, min.-max.
Fexible, min.-max.
Stripping length/Blade size
Rated data according to UL
Standard
Rated voltage/Rated current
AWG conductor (field wiring) min./max.
PTSI 4...AC
PTSI 4...DC
4 mm² 4 mm²
500 V / 12 A 36 V / 12 A
6 kV 6 kV
6.3 x 32 mm (1/4 x 1 1/4") 6.3 x 32 mm (1/4 x 1 1/4")
LED red
LED red
Plugged
Plugged
PA GF/ black
PA GF/ black
V0
V0
-50 °C...120 °C -50 °C...120 °C
90° 90°
2 mm 2 mm
Yes/Coded on PE
Yes/Coded on PE
PUSH IN
PUSH IN
5 5
1 1
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
0.5 mm²…4 mm² 0.5 mm²…4 mm²
12 mm / 3.0 x 0.5 mm 12 mm / 3.0 x 0.5 mm
UL 1059 –
600 V/20 A –
16 /12 –
Protection
degree
Only short-circuit
protection
Overload and
short-circuit protection
T A
max. Nominal values T A
max. Nominal values
IP 20 46 °C 4.0 W / 10 A 28 °C 2.5 W / 2.5 A
IP 65 23 °C 4.0 W / 10 A 39 °C 1.6 W / 1.0 A
Fuses and power loss:
Examples Current 1.0 A 1.6 A 2.0 A 4 A 6.3 A 8 A 10 A 12.5 A
SIBA, 189140
1.0 x I
500 V,
N
0.35 W 0.32 W 0.36 W 0.56 W 0.69 W 0.88 W 1 W 1.25 W
440 V, 250 V
T
1.5 x I N
0.9 W 1.1 W 1.2 W 1.5 W 2.2 W 2.6 W 3.0 W 3.5 W
SIBA,
7006584
1.0 x I N
– – – – 1.2 W 1.5 W 1.8 W 1.9 W
400 V
gRL
1.25 x I N
– – – – 2.5 W 3.2 W 3.7 W 3.9 W
No responsibility is taken for the accuracy of this information.
Further details can be obtained from the fuse manufacturers.
Derating curve for IP 65 use:
E
Note
Ordering data
Note
Safety fuse not included in delivery.
Rated voltage and rated current with fuse are determined by the G-fuse cartridge
in use.
Type Qty. Order No.
PTSI 4/LD 400V AC 1 1961770000
PTSI 4/LD 36V AC/DC 1 1252210000
Power loss P [W] bei I = 1,5 x I N
4,5
4
3,5
3
2,5
2
1,5
1
0,5
0
0 10 20 30 40 50 60 70 80 90 100 110 120
Ambient temperature T [°C]
Only short-circuit protection
Overload and short-circuit protection
Accessories
Note
ZVR ZP2.5 locking element 1816130000
1366860000 – 2013
E.19