Download PDF Format - Marine Corps Systems Command

More documents

Recommendations

Info

SETUP/INSTALLATION Step 5. Place the EXT 120V, Master Load, and all Load Step Switches to the OFF position. OFF Step 6. Connect the Generator to be tested to the Load Bank. 20
SETUP/INSTALLATION WARNING BE SURE THAT THE GENERATOR IS DE-ENERGIZED BEFORE CONNECTIONS ARE MADE AND USE INTERCONNECTING CABLE ADEQUATELY RATED FOR THE LOAD. Step 7. Connect the Cam Lock connectors according to the following table and the illustrations on page 22 and 23. GENERATOR LOAD BANK L1 or Phase A PH A Black L2 or Phase B PH B Red L3 or Phase C PH C Blue L0 or Neutral N White Ground Ground Green Step 8. Ensure the Cam Lock connectors are fully secured to the Load Bank. They must be rotated 180° clockwise to lock. Locked correctly, the connector sleeve set screws will be at the 6 o’clock position. 21
Page 1 and 2: LOAD BANK, ELECTRICAL, 100 kW FOR O
Page 3 and 4: POINTS OF CONTACT PM EPS FIELD SERV
Page 5 and 6: DESCRIPTION The Avtron Model LSH100
Page 7 and 8: GENERAL SAFETY PRECAUTIONS KEEP AWA
Page 9 and 10: COMPONENTS Interconnect Cable Set P
Page 11 and 12: COMPONENTS Interconnect Cable Groun
Page 13 and 14: CONTROLS AND INDICATORS DESIGNATOR
Page 15 and 16: CONTROLS AND INDICATORS S100 DESIGN
Page 17 and 18: CONTROLS AND INDICATORS S21 S20 S1
Page 19 and 20: OPERATION IN UNUSUAL CONDITIONS 1.
Page 21: SETUP/INSTALLATION 6 Ft. Min. Intak
Page 25 and 26: BEFORE OPERATION Step 1. Inspect th
Page 27: BEFORE OPERATION Step 9. Ensure tha
Page 30 and 31: 120/208VAC 50/60 Hz INTERNAL POWER
Page 36 and 37: 120/208VAC, 240/416VAC 400 Hz EXTER
Page 38 and 39: 120/208VAC, 240/416VAC 400 Hz EXTER
Page 40 and 41: DURING OPERATION Step 1. Monitor bo
Page 42: VISIT THE PM EPS WEB SITE www. marc

Download PDF Format - Marine Corps Systems Command

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?