8-way compact L-band Active Splitter - ETL Systems
8-way compact L-band Active Splitter - ETL Systems
8-way compact L-band Active Splitter - ETL Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
V1 E & OE<br />
RESILIENCE FLEXIBILITY RF PERFORMANCE<br />
8-<strong>way</strong> <strong>compact</strong> L-<strong>band</strong><br />
<strong>Active</strong> <strong>Splitter</strong><br />
The <strong>compact</strong> 8-<strong>way</strong> active splitter is part of the NEW LD <strong>Splitter</strong><br />
Series and is designed to provide affordable L-<strong>band</strong> splitting in a<br />
1U chassis.<br />
Covering the full range of L-<strong>band</strong>, 850-2150MHz, this shelf also<br />
offers dual redundant power supplies, and is also able to offer<br />
switchable LNB powering.<br />
Front View of a Compact 8-<strong>way</strong> LD Series<br />
<strong>Splitter</strong><br />
The shelf is housed in a 1U high rack with a single mains inlet (there<br />
are 2 internal power supplies), and offers a wide range of RF<br />
connectors, including BNC, SMA and F-type.<br />
Front panel LED’s indicate the condition of the 2 power supplies and<br />
the status of the LNB bias.<br />
<strong>ETL</strong> Model Number – D0108S1ULA-22245-B7B7
Preliminary<br />
Technical Specifications<br />
• RF Parameters<br />
Frequency Range<br />
850 to 2150 MHz<br />
Gain<br />
0 ± 1.5 dB<br />
• Physical<br />
Flatness<br />
± 1.5 dB typical<br />
Connectors<br />
BNC<br />
1 dB Compression -5 dBm<br />
IP3<br />
Noise Figure<br />
Input Return Loss<br />
Output Return Loss<br />
5 dBm<br />
12 dB<br />
12 dB<br />
12 dB<br />
Isolation 25 dB (between any 2<br />
output ports)<br />
Impedance<br />
Dimensions<br />
Weight<br />
Colour<br />
• Power<br />
75Ω<br />
1U high x 200mm<br />
deep x 19” wide<br />
2 kgs<br />
White 00-E-55 semigloss,<br />
front panel<br />
• System Control<br />
Local Control<br />
None<br />
AC Power<br />
85-264Vac<br />
50/60Hz<br />
LNB Power 18V switchable, 310<br />
mA max<br />
• Environmental<br />
Operating temperature 0 to 45°C<br />
PSU<br />
Hot-swap PSU<br />
Dual redundant<br />
None<br />
Location<br />
Storage Temperature<br />
Humidity<br />
Indoor use only<br />
-20°C to +75°C<br />
85% Non-condensing<br />
• Key Features<br />
Housed in a <strong>compact</strong> 1U high rack<br />
PSU alarms via LED’s on front panel<br />
<strong>ETL</strong> <strong>Systems</strong> develop, design and manufacture specialist<br />
equipment for satellite ground stations. For a fuller<br />
description of the <strong>ETL</strong> product range, please visit our<br />
website. This range can be used as the basis to meet your<br />
specific demands.<br />
Status of LNB via LED on front panel<br />
For additional information or details, please contact us at:<br />
Pb<br />
<strong>ETL</strong> <strong>Systems</strong> Limited, Coldwell Radio Station, Madley, Hereford, England HR2 9NE<br />
T +44 (0)1981 259020 F +44 (0)1981 259021 E info@etlsystems.com www.etlsystems.com<br />
<strong>ETL</strong> Model Number – D0108S1ULA-22245-B7B7
Change language