Tamson Catalogue - Andreescu Labor & Soft

Tamson Catalogue 

2011 

Tamson Instruments B.V. T. + 31 10 522 43 73 VAT: NL 80 66 34 984 B01 

Van ’t Hoffstraat 12 F. + 31 10 521 19 41 Rabobank: 16 01 00 046 

2665 JL BLEISWIJK www.tamson.com Chamber of Commerce: 271 69 541 

The Netherlands 

sales@tamson.com

2 

CONTENT 

VISCOSITY ................................................................................................................3 

Viscosity Baths for Measurements at Temperatures above 15°C (ambient). ....................3 

Viscosity Baths for Measurements at Temperatures below 15°C (ambient) ...................11 

VISCOSITY ACCESSORIES .........................................................................................16 

Automatic Viscometer Washer ................................................................................16 

Viscometers..........................................................................................................17 

Viscohanger..........................................................................................................20 

Viscometer Holders ...............................................................................................20 

8 Channel Stop-watch............................................................................................20 

ASTM Thermometers .............................................................................................21 

DENSITY BY HYDROMETER METHOD ...........................................................................22 

Complete setup for Measurements at Temperatures above 5°C...................................22 

THERMOMETER ........................................................................................................25 

Tamson Thermometer 3 decimals (TT3) ...................................................................25 

VISCOSITY CALIBRATION STANDARDS .......................................................................26 

Cold-Cranking Simulator Standards (CCS)................................................................26 

General Purpose Viscosity Reference Standards ........................................................27 

Low Temperature Viscosity Standards......................................................................28 

High Temperature Viscosity Standards .....................................................................29 

Medical Viscosity Standards....................................................................................29 

Rotational Viscosity Standards ................................................................................30 

Cone and Plate Standards (CAP) .............................................................................31 

Flow Cup Standards...............................................................................................34 

CERTIFIED MEASUREMENT & CALIBRATION STANDARDS ..............................................35 

Total Base Number Reference Standards..................................................................35 

Total Acid Number Reference Standards...................................................................36 

Lithium Chloride Electrolyte ....................................................................................37 

Synthetic Seawater ...............................................................................................37 

Colour Standards ..................................................................................................38 

Conductivity Standards ..........................................................................................39 

Sucrose Brix / Refractive Index Standards................................................................40 

Oil Refractive Index Standards................................................................................40 

Density Standards .................................................................................................41 

Flash Point Standards ............................................................................................43 

CERTIFIED REFERENCE MATERIALS ............................................................................44 

HIGH TEMPERATURES THERMOSTATS .........................................................................45 

Tamson Bracket ....................................................................................................45 

Circulators and Water / Oil Baths “TCXXB” Line.........................................................46 

Circulators and Water / Oil Baths “TCXX” Line...........................................................49 

HEATING ACCESSORIES............................................................................................52 

Baths Fluids for Viscosity Baths and High Temperature Thermostats ............................52 

Safe Tubing for High Temperature Circulators ...........................................................53 

LOW TEMPERATURE THERMOSTATS............................................................................54 

Cooling Circulators “TLC” Line.................................................................................54 

Immersion Coolers / Cold Fingers............................................................................61 

COOLING ACCESSORIES ...........................................................................................63 

Manifold...............................................................................................................63 

Safe Tubing for Low Temperature Thermostats .........................................................64 





sales@tamson.com

3 

VISCOSITY 

Viscosity Baths for Measurements at Temperatures above 

15°C (ambient). 

ASTM D 445 - ISO 3104 - IP 71 - DIN 51366 - EN 3104 - EN 12595 

SCOPE 

This test method specifies a procedure for the determination of the kinematic viscosity of liquid petroleum 

products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity 

through a calibrated glass capillary viscometer. 

Model TV2000 

REF 00T0800 (230V/50-60Hz), REF 00T0810 (115V/60Hz) 

MAIN CHARACTERISTICS 

Bath can be operated from ambient +5°C up to +230°C (41..446°F). With the use of the built-in cooling coil 

and an external Tamson cooler, span lies 5K above the temperature of the cooling liquid. The TV2000 has a 

bath volume of 20 liters. The TV2000 offers two rows of 2 and 1 holes with lids. These will accommodate glass 

capillary viscometers in viscometer holders. 

Range 

..230°C / ..446°F 

Reading 

Standard °C, °F on request 

Used materials inside bath Stainless Steel 304, PTFE 

Setting ± 

0.1°C 

Offset 

0.01°C 

Stability ± 0.01K 

Heating 

2800 W 

Heaters 3 

Bath volume 

20 L 

Number of lids 

3 (4 optional) 

Window 

140 * 285 mm 

Opening lid 

51 Ø mm 

Opening bath 

130 * 165 mm 

Depth bath 

320 mm 

TV2000 

OPTIONS 

REF 03T3211 Cover with 4 holes (Ø 51 mm) + lids and 2 holes for ASTM thermometers (Ø 12.5 mm) 

REF 00T0900 Illuminator Z41 230V/50-60Hz (background light) 

REF 02T3015 Bath drain 

ACCESSORIES 

REF 10T6065 Viscohanger 

REF 10T6001 Viscometer holder ‘Ubbelohde’ 

REF 10T6061 Viscometer holder ‘Cannon Fenske Routine’ 

REF 10T6071 Viscometer holder ‘Cannon Fenske Reversed Flow’ 

REF 10T6321 Viscometer holder ‘Utube (Ostwald) Routine’ 

REF 10T6051 Viscometer holder ‘Utube (Ostwald) Reversed Flow’ 

REF 10T6040 Viscometer holder ‘Pinkevitch transparent 269 mm 

REF 10T6050 Viscometer holder ‘Pinkevitch transparent long’ 

REF 10T6090 8 Channel Stop-watch 

REF 00T0239 ASTM Thermometer holder 

REF 00T0220 Tamson mineral oil 20ltrs 

(80..150°C/176..302°F) 

REF 08T0001 Silicon 200-10 cSt 20ltrs Transparent 

(20..150°C/ 68..302°F) 

REF 00T0238 Silicon 550 20ltrs Transparent 

(80..250°C/176..482°F) 

REF 00T0050 TLC10-3 external cooler to work below ambient temperature 


Viscometer/glass capillaries, see special section ‘Viscometers’ 

ASTM Thermometers, see special section ‘ASTM Thermometers’ 

Viscosity Reference oil, see special section ‘Viscosity Calibration Standards’ 





sales@tamson.com

4 

MAIN SPARE PARTS 230V/50-60Hz (115V/60Hz ON REQUEST) 

REF 06T0375 Microprocessor board TMC50, complete 

REF 06T1810 Power supply board 

REF 28T4026 PT-100 sensor 

REF 04T0061 Stirrer complete 

REF 25T0280 Heater 200 W 



REF 28T4320 Front foil with membrane switches TV2000 

REF 27T3048 LCD Display 

REF 06T0390 PCB LED 

REF 24T8541 Mains switch 

REF 25T1242 Cooling fan 

REF 24T8581 Safety cut-out thermostat 





sales@tamson.com

5 

Model TV4000 



Bath can be operated from ambient +5°C up to +230°C (41..446°F). With the use of the built-in 

cooling coil and an external Tamson cooler, span lies 5K above the temperature of the cooling liquid. 

The TV4000 has a bath volume of 40 litres. The stainless steel cover has 7 openings with lids. These 

will accommodate glass capillary viscometers in viscometer holders. 

Range 

Reading 

Used materials inside bath 

Setting ± 

Offset 

..230°C / ..446°F 


Stainless Steel 304, PTFE 

0.01°C 


Heating 

Heaters 3 

Bath volume 


Window 

Opening lid 

Opening bath 

Depth bath 

0.01°C (Optional 0.005°C) 

2800 W 

40 L 

4 + 3 or 4 + 4 L 

270 * 285 mm 

51(Ø) mm 

260 * 240 mm 

340 mm 

OPTIONS 

REF 00T0729 Cover with 8 holes (Ø 51 mm) + lids and 2 holes for ASTM thermometers (Ø 12.5 mm) 


ACCESSORIES 







REF 10T6040 Viscometer holder ‘Pinkevitch transparent 269mm 



(80..150°C/176..302°F) 


(20..150°C/ 68..302°F) 


(80..250°C/176..482°F) 








REF 06T0500 Microprocessor board TMC70 

REF 06T0512 Print Power TMC70 

REF 06T0509 Print Front Panel with LED 



REF 25T0170 Heater 200/1000 W 







TV4000 





sales@tamson.com

6 

Model TV7000 



Bath can be operated from ambient +5°C up to +230°C (41..446°F). With the use of the built-in 

cooling coil and an external Tamson cooler, span lies 5K above the temperature of the cooling liquid. 

TV7000 has a bath volume of 70 litres. The stainless steel bath cover has 7 openings with lids. These 

openings will accommodate glass capillary viscometers in viscometer holders. The TV7000 is often 

used to calibrate long thermometers, to calibrate master viscometers or for oxidation stability tests. 

Range 

..230°C / ..446°F 

Reading 



Setting ± 

0.1°C 

Offset 

0.01°C 


Heating 

2800 W 

Heaters 3 

Bath volume 

70 L 


4 + 3 or 4 + 4 L 

Window 

270 * 585 mm 

Opening lid 

51(Ø) mm 

Opening bath 

260 * 240 mm 

Depth bath 

600 mm 

TV7000 

OPTIONS 

REF 00T0729 Cover 8 holes (Ø 51 mm) + lids and 2 holes for ASTM thermometers (Ø 12.5 mm) 



ACCESSORIES 










(80..150°C/176..302°F) 


(20..150°C/ 68..302°F) 


(80..250°C/176..482°F) 







Viscosity Reference oil, see special section ‘Viscosity Calibrations standards’ 






REF 28T4021 Heater 200/1000 W 



REF 27T3048 Display 









sales@tamson.com

7 

Model TV12 



The TV12 is a unique viscosity bath with a small footprint. The TV12 can be operated from ambient +5°C up to 

+120°C (41..248°F). With the use of the built-in cooling coil and an external Tamson cooler, span lies 5K 

above the temperature of the cooling liquid. The TV12 has a bath volume of only 12 liters and a unique 

stability of 0.005K. The TV12 offers 1 row of 4 holes with lids. These openings will accommodate glass capillary 

viscometers in viscometer holders. A permanent light is located in the top plate to supply clear light and 

guarantees optimal visibility inside the bath. A bath overflow outlet protects from expanding bath oil when the 

bath filling is too high. A bath drain is standard included. The bath is fitted with a double window of which the 

front pane is detachable for cleaning purposes. 

Range 

Reading 


Setting ± 

Offset 

..120 (248°F) 



0.01°C 

0.01°C 


Heating 

Heaters 2 

Bath volume 12 

Number of lids 4 

Window 

Opening lid 

Opening bath 

Depth bath 

1280 W 

246 * 250 mm 

51(dia) mm 

244 * 75 mm 

300 mm 

OPTIONS 

REF 07T0080 Optical Level indicator 

REF 13T6200 Levelling platform 

REF 13T6210 Calibration/metal block 

REF 13T6220 Lid + High contrast white glass back plate 

REF 13T3006.09 Lid for 4 Cannon-Fenske Routine viscometers 

TV12 

ACCESSORIES 












(80..150°C/176..302°F) 


(20..150°C/ 68..302°F) 






REF 06T0500 Microprocessor board TMC70 

REF 06T0514 Print Power board TMC70 

REF 24T0028 Power supply 500 W 




REF 06T0507 Print TMC70 display 

REF 28T4125 Net entry plus filter 10A 

REF 25T1343 Capacitor 2 uF 







sales@tamson.com

8 

Model TV2000AKV 

Automatic Kinematic Viscosity 



The TV2000AKV system offers a possibility to determine kinematic viscosity automatically in a way which 

complies to the ASTM methods D 445 and D 446. The measuring head is able to measure both transparent and 

colored / darker liquids. The sensitivity of the electronic detection system can be adapted for colored liquids. 

The measuring head can store up to ten viscometer tube constants. It is further possible to set the amount of 

runs (test) per sample. The system determines the best reproducibility from the measuring results. The 

TV2000AKV can be operated from ambient +5°C up to +130°C. With the use of the built-in cooling coil and an 

external Tamson cooler, span lies 5K above the temperature of the cooling liquid. The TV2000AKV has a bath 

volume of 20 liters. The viscosity measurement range is defined by the used glass capillaries and may vary 

from 0.3 up to 10,000 cSt. 

Range 

..130°C / ..266°F 

Reading 



Setting ± 

0.1°C 

Offset 

0.01°C 


Heating 

2800 W 

Heaters 3 

Bath volume 

20 L 


Window 

140 * 285 mm 

Opening lid 

51(dia) mm 

Opening bath 

130 * 165 mm 

TV2000AKV 

OPTIONS 



NECESSARY ACCESSORIES 

REF 00T0890 Measuring head for Cannon Fenske transparent viscometer (or/and) 

REF 00T0840 Measuring head for Ubbelohde viscometers 

REF 00T0233 Vacuum Pump Valves Teflon 

The glass capillary viscometers supplied for the TV2000AKV are completely manufactured according to ASTM D 

446 and IP 71, however the timing marks have been omitted for the IR sensors of the electronic detection 

system. The tubes are further more precisely manufactured than the norm requires. This guarantees optimal 

measuring results. The tubes will be supplied with a factory calibration certificate, stating the viscometer 

number and constant of the viscometer. In order to use the TV2000AKV you will need the viscometers which 

are only supplied by Tamson. The following glass capillary viscometers are available: 

UBBELOHDE AKV VISCOMETER for transparent liquids 

REF 25T0766 Size number 0 - Viscosity range from 0.3 to 1 cSt 

REF 25T0767 Size number 0C - Viscosity range from 0.6 to 3 cSt 

REF 25T0768 Size number 0B - Viscosity range from 1 to 5 cSt 

REF 25T0769 Size number 1 - Viscosity range from 2 to 10 cSt 

REF 25T0770 Size number 1C - Viscosity range from 6 to 30 cSt 













sales@tamson.com

9 

CANNON-FENSKE ROUTINE AKV VISCOMETER for transparent liquids 












On request Size number 600 - Viscosity range from 4000 to 20000 cSt 

ACCESSORIES 



(20..150°C/ 68..302°F) 













REF 28T2430 Front foil with membrane switches 

REF 27T3048 LCD Display 





MAIN SPARE PARTS AKV-SYSTEM 230V/50-60Hz (115V/60Hz ON REQUEST) 

REF 06T1941 PCB with vacuum valves 

REF 06T0410 PCB power supply AKV 

REF 06T1999 PCB analogue 

REF 06T1998 PCB micro processor 

REF 28T7000 Printer 

REF 28T7035 Printer paper 

REF 27T3046 LC-display 

REF 24T0041 PVC vacuum tube blue (1 meter) 

REF 28T4051 Front foil AKV unit 

REF 28T4120 Needle vent vacuum 

REF 28T4100 Vacuum valve (Located on PCB) 

REF 28T4150 Coupling vacuum system to viscometer head female 

MAIN SPARE PARTS MEASURING HEAD 230V/50-60Hz (115V/60Hz ON REQUEST) 

REF 24T0043 Silicon tubing 5*8 mm 

REF 28T4160 Vacuum connector onto AKV-system 

REF 06T1723 Silicon sealing viscometer tube 

REF 06T1942 PCB measuring head 

REF 24T7937 DIN-connector electronic cable 

MAIN SPARE PARTS FOR FLUID TRAP 

REF 28T4122 Filter patron 

REF 28T4123 Filter housing 

REF 28T4124 Internal replacement of filter (white + black parts) 





sales@tamson.com

10 

Model TV2500 



Bath can be operated from ambient +5°C up to +120°C (41..248). With the use of the built-in cooling coil 

and an external Tamson cooler, span lies 5K above the temperature of the cooling liquid. The TV2500 has 

a bath volume of 25 liters. The TV2500 offers two rows of 2 holes with lids. These openings will 

accommodate glass capillary viscometers in viscometer holders. 

Range 

..120°C / ..248°F 

Reading 



Setting ± 

0.1°C (Optional 0.01°C)* 

Stability ± 

0.02°K 

Heating 

1800 W 

Heaters 1 

Bath volume 

25 L 


Window 

230 * 300 mm 

Opening lid 

51 (Ø) mm 

Opening bath 

185 * 155 mm 

Depth bath 

300 mm 

TV2500 

OPTIONS 


REF 07T0080 Level detection 

REF 02T0210 Safety window for use PV>50°C 

REF 02T0200 Leakage tray 

*REF 02T3040 0.01°C display readout 

ACCESSORIES 











REF 00T0220 Tamson mineral oil 20 ltrs 

(80..150°C/176..302°F) 


(20..150°C/ 68..302°F) 







REF 25T1295 Motor for stirrer 


REF 06T0514 Print Gem Power board TMC70 

REF 24T8581 Over-temperature protection thermostat 


REF 28T3902 Front foil keypad 


REF 06T0496 Mains board with filter and relay 

REF 06T0518 Print TMC70 TLH 





sales@tamson.com

11 

Viscosity Baths for Measurements at Temperatures 

below 15°C (ambient) 

ASTM D 445 - ISO 3104 - IP 71 - DIN 51366 – EN 3104 – EN 12595 

SCOPE 

This test method specifies a procedure for the determination of the kinematic viscosity of liquid petroleum 

products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity 

through a calibrated glass capillary viscometer. 

Model TV12LT 

REF 00T0410 (230V/50Hz), REF 00T0420 (230V/60Hz) and 00T0415 (115V/60Hz) 


The TV12LT is a unique viscosity bath with a small footprint. It can be operated from -40°C up to +40°C (- 

40..104°F). Other temperature ranges are available. The TV12LT has a bath volume of only 15 liters and a 

unique stability. The TV12LT offers 1 row of 4 holes with lids. These openings will accommodate glass capillary 

viscometers in viscometer holders. A permanent light is located in the top plate to supply clear light and 

guarantees optimal visibility inside the bath. A bath overflow outlet protects from expanding bath oil when the 

bath filling is too high. A bath drain is standard included. The bath is fitted with a double window of which the 

front pane is detachable for cleaning purposes. 

Range 

-40..40°C* / -40..104°F 

Reading 


Used materials inside 

bath 


Setting ± 

0.01°C 

Offset 

0.01°C (optional 0.005°C) 


Heating 

500 W + 700W 

Heaters 2 

Bath volume 

15-18 L 


Window 

255x230 mm 

Opening lid 

4 x 51(dia) mm 

Opening bath 

248 * 73 mm 

Depth bath 

300 mm 

TV12LT 

OPTIONS 

REF 07T0080 Optical level indicator 


REF 13T6210 Calibration/metal block 

REF 13T6220 Lid + High contrast white glass back plate 

REF 13T3006.09 Lid for 4 Cannon-Fenske Routine viscometers 

*Range from -40°C up to +80°C REF 00T0425 (230V/50Hz), REF 00T0435 (230V/60Hz) and 00T0430 

(115V/60Hz) 

*Range from -50°C up to +20°C REF 00T0470 (230V/50Hz), REF 00T0480 (230V/60Hz) and 00T0475 

(115V/60Hz) 

ACCESSORIES 















sales@tamson.com

12 





REF 25T1295 Motor for stirrer 

REF 25T1343 Capacitor 2uF 

REF 25T0340 Heater 780 Watts 

REF 25T0351 Heater 500 Watts 

REF 24T8081 Motor fuse 0.3 Amp 

REF 25T1123 Compressor 

REF 25T0404 Window heating (4x 115V placed in series) 

REF 24T8581 Over-temperature protection thermostat 


REF 28T4019 Front keypad 


REF 06T0512 PCB Mains board with filter and relay 

REF 06T0500 PCB - Controller 

REF 06T0503 PCB - IO DC PWM Heating 

REF 06T0505 PCB - IO LT version 

REF 06T0507 PCB - Display 





sales@tamson.com

13 

Model TV4000LT 



The TV4000LT is a unique visibility bath with wide dimensions. Working temperature ranges from minus 

40°C up to plus 100°C. The integrated cooling system is able to lower the temperature of the 40L bath 

content down to minus 40°C within approximately 2 hours. The cooling power can be controlled over 4 

stages so that the heat removal capacity is trimmed to the desired set point temperature, saving up to 

50% of energy. Due to its wide temperature range the bath can be used for multiple purposes varying 

from low temperature viscosity measurement to calibration of sensors and thermometers. The large 

windows show the bath contents clearly. The windows are heated preventing build up of condensate. The 

maximum temperature lies around +100°C. Overall accuracy is better than +/- 0.02°C over the whole 

temperature range. Ambient temperature drifts

14 

Model TV7000LT 



The TV7000LT is a unique visibility bath with wide dimensions. Working temperature ranges from minus 

40°C up to plus 100°C. The integrated cooling system is able to lower the temperature of the 70L bath 

content down to minus 40°C within approximately 2 hours. The cooling power can be controlled over 4 

stages so that the heat removal capacity is trimmed to the desired set point temperature, saving up to 

50% of energy. Due to its wide temperature range the bath can be used for multiple purposes varying 

from low temperature viscosity measurement to calibration of sensors and thermometers. The large 

windows show the bath contents clearly. The windows are heated preventing build up of condensate. The 

maximum temperature lies around +100°C. Overall accuracy is better than +/- 0.02°C over the whole 

temperature range. Ambient temperature drift

15 

Model TLV25 



The TLV25 system contains a 25 litres Dewar flask. The fluid in the flask must permanently be cooled by a 

separate cryostat. The temperature set point is maintained via a microprocessor controlled heating 

element. When using the KV40 or KV80 minimum working temperatures of minus 40°C or minus 80°C can 

be reached. All presented data is measured by using a TLV25 filled with 25 litres of methanol and a KV40 

or KV80 immersion cooler. At the minimum-temperature, the provided heat removal is still enough to 

maintain stable temperature control, even when glasswork is placed in the bath. The systems accuracy is 

better than the requirements of ASTM D 445 and ISO 3104. The bath is illuminated by a fluorescent light 

built in behind the Dewar-flask. The top lid has a turn table construction with 3 holes + 3 lids of 51 Ø 

mm. By turning the lid the immersed viscometer can be positioned in front of the window. This window is 

heated to keep clear sight at low temperatures. The set point can be set in steps of 0.1°C from -90°C up 

to +60°C (-130..140°F). Overall accuracy is better than ±0.03K. 

Range 

-90..60°C/-130..140°F 

Reading 

Standard °C, °F on 

request 

Used materials inside 

bath 

Stainless Steel 304, 

PTFE 

Setting ± 

0.1°C 

Offset 

0.01°C 


Heating 

780 W 

Heaters 1 

Bath volume 

25 L 


Opening lid 

51 (dia) mm 

Opening bath 

260 * 240 mm 

Depth bath 

400 mm 

TLV25 

OPTIONS 

REF 00T0212 KV40 to reach -40°C (230V/50Hz), REF 00T212A (230V/60Hz), REF 00T0259 (115V/60Hz) 

REF 00T0216 KV80 to reach -80°C (230V/50Hz), REF 00T216A (230V/60Hz), REF 00T0260 (115V/60Hz) 

ACCESSORIES 














KV40 & KV80 


REF 04T0100 Pump assembly with motor 


REF 28T3015 Temperature controller 85..250V 

REF 25T2320 PT-100 115 mm 

REF 24T9250 Fluorescent lamp 

REF 06T0377 PCB window heating 

REF 25T0140 Window heating 115V 40W (2 placed in series 230V) 

REF 28T0091 Sensor programmed for window heating 

REF 06T1870 PCB filter temp controller 

REF 24T8420 Solid state 

REF 24T8585 Thermostat 

REF 26T1420 Dewar flask 





sales@tamson.com

16 

VISCOSITY ACCESSORIES 

Automatic Viscometer Washer 

- MODEL ALV 110 – 

-REF 18450 - 

APPLICATION 

Designed in order to eliminate hand cleaning of glass kinematic viscometer tubes. 


Viscometer washer supplied with 6 nozzle 

stoppers. It allows external and internal washing 

of all types of viscometer tubes mentioned in 

ASTM D446. Viscometer tubes are suspended in 

BIOSANE solvent vapours at 80°C. 

 

 

Very fast cleaning (5 to 15 min) for 6 viscometer tubes 

Negligible solvent consumption 

SPARE PARTS 230V/50-60Hz (115V/60Hz ON REQUEST) 

REF 18453 Heating element 

REF 18454 Injector stopper 

REF 18455 Glass cleaning bath 

REF 21694 Heating controller 

ALV 110 

SCOPE OF DELIVERY 

ALV 110 – REF. 18450 - Ready to use - 

For use on AC 230V, 50/60 Hz - 5A - 

Dimensions (wxdxh) 240x260x350 mm 

Weight : ± 7 kg / 115V on request 





sales@tamson.com

17 

Viscometers 

APPLICATION 

For the determination of kinematic viscosity of transparent and opaque Newtonian liquids according to ASTM 

D 445, ISO 3104, IP 71, and BS 188. 

VISCOMETER TUBES with calibration certificate 

UBBELOHDE VISCOMETER for transparent and opaque liquids 

REF 25T0814 

REF 25T0815 

REF 25T0816 

REF 25T0817 

REF 25T0818 

REF 25T0819 

REF 25T0820 

REF 25T0821 

REF 25T0822 

REF 25T0823 

REF 25T0824 

REF 25T0825 

REF 25T0826 

REF 25T0827 

REF 25T0828 

REF 25T0829 

Size number 0 - Viscosity range from 0.3 to 1 cSt 

Size number 0C - Viscosity range from 0.6 to 3 cSt 

Size number 0B - Viscosity range from 1 to 5 cSt 

Size number 1 - Viscosity range from 2 to 10 cSt 

Size number 1C - Viscosity range from 6 to 30 cSt 













CANNON-FENSKE ROUTINE VISCOMETER for transparent liquids 

REF 25T0790 

REF 25T0791 

REF 25T0792 

REF 25T0793 

REF 25T0794 

REF 25T0795 

REF 25T0796 

REF 25T0797 

REF 25T0798 

REF 25T0799 

REF 25T0800 

REF 25T0801 

REF 25T0842 

REF 25T0843 
















CANNON-FENSKE VISCOMETER REVERSE FLOW TYPE for opaque and transparent liquids 

REF 25T0802 

REF 25T0803 

REF 25T0804 

REF 25T0805 

REF 25T0806 

REF 25T0807 

REF 25T0808 

REF 25T0809 

REF 25T0810 

REF 25T0811 

REF 25T0812 

REF 25T0813 

REF 25T0850 

REF 25T0851 



















sales@tamson.com

18 


BS/IP U RF VISCOMETER for opaque liquids and transparent liquids 

REF 25T1030 

REF 25T1031 

REF 25T1032 

REF 25T1033 

REF 25T1034 

REF 25T1035 

REF 25T1036 

REF 25T1037 

REF 25T1038 

REF 25T1039 

REF 25T1040 












HOUILLON VISCOMETER for transparent liquids 


REF 25T0877 

REF 25T0878 

REF 25T0879 

REF 25T0880 

REF 25T0881 

Viscosity range at 80 cSt 






BS/IP SL VISCOMETER for transparent liquids 

REF 25T0830 

REF 25T0831 

REF 25T0832 

REF 25T0833 

REF 25T0834 

REF 25T0835 

REF 25T0836 

REF 25T0837 

REF 25T0838 











S.I.L. VISCOMETER for transparent liquids 

REF 25T0882 

REF 25T0883 

REF 25T0884 

REF 25T0885 

REF 25T0886 

REF 25T0887 

REF 25T0888 

REF 25T0889 













sales@tamson.com

19 


BAUME VIGNERON VISCOMETER for transparent liquids 

REF 25T0852 

REF 25T0853 

REF 25T0854 

REF 25T0855 

REF 25T0856 

REF 25T0857 

REF 25T0858 

REF 25T0859 

REF 25T0860 

REF 25T0861 

REF 25T0862 

REF 25T0863 

REF 25T0864 

REF 25T0865 

REF 25T0866 

REF 25T0867 

REF 25T0868 

REF 25T0869 

REF 25T0870 

REF 25T0871 

REF 25T0872 

Viscosity range at 0.63 cSt 





















CANNON MANNING VACUUM VISCOMETER for bitumen 

REF 18892 

REF 18893 

REF 18894 

REF 18895 

REF 18896 

REF 18897 

REF 18898 

REF 18899 

REF 18900 

REF 18901 

REF 18902 












Viscometers are delivered with a calibration certificate as displayed. 

Viscometer can be delivered with a UKAS certificate. Then a ‘P’ 

should be added to the reference number, e.g. 25T0814P. 

Other viscometer types on request 





sales@tamson.com

20 

Viscohanger 

-REF 10T6065- 

APPLICATION 

A seven position hanger for use with manual capillary glass viscometers. The unit facilitates safe, easy storage 

of viscometers once taken from a viscometer bath prior to cleaning. The detachable drip tray collects residual 

bath fluid and allows easy disposal to waste. 


Detachable drip tray 

Made from stainless steel to aid chemical resistance 

Space saving footprint 

Dimensions 51 x 28 x 49 cm (L)x(W)x(H) 

Easy to clean 

Viscohanger 

Viscometer Holders 

APPLICATION 

A high quality holder/support for use with manual glass capillary viscometers. 


Insulated handle, easy to grab at high working temperatures 

Stainless steel 

Ring to hang out ± 265 mm 

Smart design prevents viscometer from falling out of holder 

REFERENCES 

REF 10T6001 Viscometer holder "Ubbelhode" 

REF 10T6061 Viscometer holder "Cannon-Fenske Routine" 

REF 10T6071 Viscometer holder "Cannon-Fenske Reverse Flow" 

REF 10T6321 Viscometer holder "Utube (Ostwald) Transparent/Routine" 

REF 10T6051 Viscometer holder "U-tube (Ostwald) Reversed flow" 

REF 10T6040 Viscometer holder "Pinkevitch transparent D446, 269mm" 

REF 10T6050 Viscometer holder "Pinkevitch transparent long" 

Viscometer holders 

8 Channel Stop-watch 

REF 10T6090 

APPLICATION 

Timer to measure the time for a volume of liquid to flow under gravity through a calibrated glass capillary 

viscometer. The apparatus contains 8 individual stopwatches. Each stopwatch operates by pressing a single 

button to run, stop or reset. Auto power-off when no stopwatches are running. After power-off individual 

values are kept in memory. All values can be reset together or per channel. 


8 Individual channels 

Easy to use 

Long battery life 

Uses simple 9V block (battery included) 

0.01 sec resolution 

Outer dimensions (LxWxH) 195x112x46 mm 

Crystal frequency ± 5 ppm, stability ± 20 ppm/°C 

Timer 





sales@tamson.com

21 

ASTM Thermometers 

APPLICATION 

Precision mercury in glass thermometers for use in specific ASTM / IP test methods. These thermometers are 

of the highest quality and easily readable with an etched surface scale and yellow backing. The ASTM 

designation ensures that these thermometers meet the strict guidelines of the American Society for Testing 

and Materials (ASTM). Thermometers come with certificate of conformity. Other certificates on request. 

REFERENCES 

ASTM 

N° 

REF. 

Cat. 

RANGE 

in °C 

SUBDIVI- 

SION in C° 

IMMERSION 

in mm 

1 C 25T0901 -20 à +150 1 76 

2 C 25T0902 -5 à +300 1 76 

3 C 25T0903 -5 à +400 1 76 

5 C 25T0904 -38 à +50 1 108 

6 C 25T0905 -80 à +20 1 76 

7 C 25T0906 -2 à +300 1 Total 

8 C 25T0907 -2 à +400 1 Total 

9 C 25T0908 -5 à +110 0.5 57 

10 C 25T0909 +90 à +370 2 57 

11 C 25T0910 -6 à +400 2 25 

12 C 25T0911 -20 à +102 0.2 Total 

13 C 25T0912 +155 à +170 0.5 Total 

14 C 25T0913 +38 à +82 0.1 79 

15 C 25T0914 -2 à +80 0.2 Total 

16 C 25T0915 +30 à +200 0.5 Total 

17 C 25T0916 +19 à +27 0.1 Total 

18 C 25T0917 +34 à +42 0.1 Total 

19 C 25T0918 +49 à +57 0.1 Total 

20 C 25T0919 +57 à +65 0.1 Total 

21 C 25T0920 +79 à +87 0.1 total 

22 C 25T0921 +95 à +103 0.1 total 

23 C 25T0922 +18 à +28 0.2 90 

24 C 25T0923 +39 à +54 0.2 90 

25 C 25T0924 +95 à +105 0.2 90 

26 C 25T0925 +130 à +140 0.1 total 

33 C 25T0927 -38 à +42 0.2 50 

34 C 25T0928 +25 à +105 0.2 50 

35 C 25T0929 +90 à +170 0.2 51 

36 C 25T0930 -2 à +68 0.2 45 

38 C 25T0931 +24 à +78 0.2 100 

39 C 25T0933 +48 à +102 0.2 100 

40 C 25T0932 +72 à +126 0.2 100 

41 C 25T0934 +98 à +152 0.2 100 

42 C 25T0935 +95 à +255 0.5 100 

44 C 25T0937 +18.5 à +21.5 0.05 total 

45 C 25T0938 +23.6 à +26.4 0.05 total 

46 C 25T0939 +48.6 à +51.4 0.05 total 

47 C 25T0940 +58.6 à +61.5 0.05 total 

49 C 25T0941 +20 à +70 0.2 65 

52 C 25T0942 -10 à +5 0.1 total 

54 C 25T0943 +20 à +100.6 0.2 total 

56C 25T0956 +19 a +35 0.02 total 

57 C 25T0944 -20 à +50 0.5 57 

61C 25T0946 +32 a +127 0.2 79 

62 C 25T0947 -38 à +2 0.1 total 

63 C 25T0948 -8 à +32 0.1 total 

64 C 25T0949 +25 à +55 0.1 total 

65 C 25T0950 +50 à +80 0.1 total 

67 C 25T0952 +95 à +155 0.2 total 

68 C 25T0953 +145 à +205 0.2 total 

71 C 25T0955 -37 à +21 0.5 76 

73 C 25T0957 -41.4 à +38.6 0.05 total 

82 C 25T0958 -15 à +105 1 30 

83 C 25T0959 +15 à +70 1 40 

84 C 25T0960 +25 à +80 1 249 

85 C 25T0961 +40 à +150 1 181 

86 C 25T0962 +95 à +175 1 35 

87 C 25T0963 +150 à +205 1 40 

88 C 25T0964 +10 à +200 1 57 

89 C 25T0965 -20 à +10 0.1 76 

90 C 25T0966 0 à +30 0.1 76 

91 C 25T0967 +20 à +50 0.1 76 

92 C 25T0968 +40 à +70 0.1 76 

93 C 25T069 +60 à +90 0.1 76 

94 C 25T0970 +80 à +110 0.1 76 

95 C 25T0971 +100 à +130 0.1 76 

96 C 25T0972 +120 à +150 0.1 76 

98C 25T0973 +16 a +82 0.5 total 

99 C 25T0974 -48 à +4 0.2 35 

102 C 25T0975 +123 à +177 0.2 100 

103 C 25T0976 +148 à +202 0.2 100 

104 C 25T0977 +173 à +227 0.2 100 

105 C 25T0978 +198 à +252 0.2 100 

106 C 25T0979 +223 à +277 0.2 100 

107 C 25T0980 +248 à +302 0.2 100 

110 C 25T0981 +133.6 à +136.4 0.05 total 

111 C 25T0982 +170 à +250 0.2 100 

112 C 25T0983 +4 à +6 0.02 total 

113 C 25T0984 -1 à +175 0.5 total 

114 C 25T0985 -80 à +20 0.5 total 

116 C 25T0986 +18.9 à +25.1 0.01 total 

117 C 25T0987 +23.9 à +30.1 0.01 total 

118 C 25T0988 +28.6 à +31.4 0.05 total 

119 C 25T0989 -38.3 à +30 0.1 100 

120 C 25T0990 +38.5 à +41.5 0.05 total 

121 C 25T0991 +98.5 à +101.5 0.05 total 

122 C 25T0992 -45 à -35 0.1 total 

126 C 25T0993 -27.4 à -24.6 0.05°C total 

127 C 25T0995 -21.4 à -18.6 0.05 total 

128 C 25T0994 -1.4 à +1.4 0.05°C total 





sales@tamson.com

22 

DENSITY BY HYDROMETER METHOD 

Complete setup for Measurements at Temperatures 

between 5°C and 70°C 

ASTM D 1298 & IP 160 - ASTM D 287 

SCOPE 

This specific method covers following laboratory determinations by hydrometer method: 

Density, Relative density (Specific gravity), and American Petroleum Institute Gravity of Crude 

petroleum and Liquid Petroleum products, 

COMPLETE SETUP 



A Tamson TLC15-5 refrigerator circulates a (cold) flow through the double walls of the cylinders. The TLC15-5 

maintains the bath temperature within 0.25°C of the test temperature required by the ASTM D1298 method. 

Our system is strictly conform to the ASTM D1298 method and conversion tables are not necessary preventing 

errors by users. The PTFE valves ensure fast drainage and cleaning of the tube. The easy detachable leakage 

tray prevents that portions of the sample are spilled on the workbench. The tripod offers full view on the 

hydrometer. Our special ASTM D1298 support eliminates the problem of mounting brackets or portions of a 

thermostatic bath blocking the view. The Tamson D1298 solution is a complete setup existing of three glass 

cylinders, support and circulator. Our system offers an interesting price advantage compared to other solutions 

based on a combination of a thermostatic bath with an external chiller. The new ASTM D1298 setup can also be 

used for ASTM D287, standard test method for API gravity of crude petroleum and petroleum products having 

a Reid vapour pressure of 26 psi (180 kPa) or less. For this method the gravities are determined at 60°F. 

Item 

Reading 

Interface 

Unit 

°C or 

°F 

menu selectable 

RS232 

Setting ± [°C/F] 0.01 

Stability [°K] Better than 0.1 

Circulator TLC15 

Bath volume [L] 5 

Opening bath [mm] 85 x 150 (Effective use) 

Depth bath [mm] 150 

Length [mm] 420 (460 inclusive drain) 

Width [mm] 265 

Height [mm] 565 

Weight [kg] 30 

Power [Watt] 1100 (1 heater) 

Tripod 

Length tripod [mm] 360 (front to back) 

Width tripod [mm] 320 (left to right) 

Height tripod [mm] 800 

Weight tripod [kg] 9 (glass parts included) 

Ambient 

temperature 

[°C] 18 .. 23 

Complete Setup ASTM D1298 

OPTIONS 

REF 25T0911 ASTM thermometer (12C), range from -20 to +102°C with certificate of conformity. 

REF 25T0911W ASTM thermometer (12C), range from -20 to +102°C with works certificate. 





sales@tamson.com

23 

ACCESSORIES 

To verify the performance of your instrument Tamson also supplies liquid density standards. These are 

manufactured in accordance with ISO Guide 34 and certified to ISO 17025 under UKAS with densities quoted 

at 15°C or 20°C. They are supplied in 2 x 500 mL bottles with tamper proof caps to prevent contamination. 

Density standards are available at various densities from 0.7136 to 0.8788 g/m3 at 15 °C or 0.6732 to 0.8706 

g/m3 at 20 °C 

Reference Value Description 

25T2200 

0,7136 g/ml 

Double Pack, 2 x 0.5ltr, Density Standard @15°C value 

25T2201 

0,8056 g/ml 

25T2202 

0,8435 g/ml 

25T2203 

0,8788 g/ml 

Reference Value Description 

25T2210 

0.6732g/mL 

Double Pack, 2 x 0.5ltr, Density Standard @20°C value 

25T2211 

0.7096g/mL 

25T2212 

0.7716g/mL 

25T2213 

0.8021g/mL 

25T2214 

0.8112g/mL 

25T2215 

0.8148g/mL 

25T2216 

0.8225g/mL 

25T2217 

0.8333g/mL 

25T2218 

0.8403g/mL 

25T2219 

0.8480g/mL 

25T2220 

0.8546g/mL 

25T2221 

0.8610g/mL 

25T2222 

0.8668g/mL 

25T2223 

0.8670g/mL 

25T2224 

0.8706g/mL 

Reference Description 

25T2401 Hydrometer L50 cal @15°C 0.600-0.650 



























25T2450 Hydrometer M50 cal @15°C 0.600-0.650 












































sales@tamson.com

24 

































REF 25T2400 ISO 17025 / UKAS calibration certificate can be ordered for each hydrometer. 

SPARE PARTS SETUP (standard included when delivered for first time) 

REF 09T0000 Glass tube, fluid jacketed hydrometer cylinder with stopper valve (3 per setup needed) 

REF 08T0100 Tubing 8 x 12 mm 1 meter (3 meter per setup needed) 

REF 08T0120 Plastic screw cap red with opening GL14 (6 per setup needed) 

REF 08T0122 Plastic hose connection angles GL14 (3 per setup needed) 

REF 08T0121 Plastic hose connection straight GL14 (3 per setup needed) 

REF 08T0125 Y split Polypro Pylene (2 per setup needed) 

REF 08T0126 T split Polypro Pylene (2 per setup needed) 

MAIN TLC15 SPARE PARTS 230V/50Hz (230V/60Hz and 115V/60Hz ON REQUEST) 

REF 25T1295 Motor for pump 

REF 25T1343 Capacitor 2 uF 


REF 24T8081 Motor fuse 0.3 Amp. 

REF 06T0514 Print Power TLC-TMC70 

REF 24T8581 Mechanical safety thermostat 

REF 04T2070 Bearing cover with bearing 

REF 04T2135 Bearing PTFE 



REF 06T0513 Print TLC-TMC70 uP-Display 





sales@tamson.com

25 

THERMOMETER 

Tamson Thermometer 3 decimals (TT3) 

IEC 5293 

APPLICATION 

The calibration of probes, thermometers, instruments, and indicators and temperature measurement of 

viscosity baths. 


The Tamson Thermometer has a three decimal reading. The thermometer uses a standard PT100 probe for 

measurements from -20 ..+250°C or -4 ..+482°F. The thermometer uses an internal correction table to meet 

the IEC751 required accuracy of ± 0.01°C. A high accuracy data converter samples the PT100 value and a 

microprocessor is used to correct these values. The calibration data is kept in internal memory. A second 

memory offers the possibility for data logging. Sampling times can vary from 1 second to 300 seconds. At each 

interval the temperature is measured and stored. Each measurement has an individual time stamp and can be 

recalled easily using the PC software. The thermometer operates on a Battery pack. A full charge supplies 

power for 16 days of continuous use. When off the battery will keep its charge. 

Item Unit TT3 

Ordering code 

10T6095 

Range 

Reading 

Interface 

-100..+300°C/-148..572°F 

°C or °F menu selectable 

RS232 

Resolution [°C/F] 0.001 

Accuracy [°K] ± 0.01 

Linearity [°K] ± 0.01 

Power 

Charge 

Mains adapter 

Sleep current 

Nominal 

current 

Battery pack 

Battery NiMH operated 

2Hrs 

100-240~50/60Hz 9V-1A 

0.01mA 

2mA 

800mAh 

Log time [hr] 19hr sample rate 1s 

5700hr sample rate 300s 

Sample rate [sec] 1,2,5,10,20,60,120,300 

Dimensions [mm] 105x32x150 (LxWxH) 

excl probe 

Weight [gr] 355 (inclusive probe) 

Power [Watt] Battery NiMH operated 

Frequency [Hz] Suited for both 50 & 60 

CE 

All models conform to CE regulation 

TT-3 

TT-3 + Suitcase 

Necessary Accessories 

REF 25T2350 Temperature probe* -100..300°C/-148..302°F 115 x 3mm, Class "a" 

REF 21T0200 Blue Suitcase to store TT-3. 

* The unit will be calibrated in combination with the supplied probe in order to meet IEC 751. It is not possible to exchange 

probes. 

Options 

REF 10T6096 

REF 10T6097 

REF 10T6098 

REF 24T0038 

REF 24T0037 

REF 24T0036 

Works certificate 0 .. +150°C 

Works certificate -40 .. +150°C 

Verification calibration per point [-40 .. +150°C] 

RS232 .. USB converter 

Flatcable 2mtr 

Flatcable 1mtr 





sales@tamson.com

26 

VISCOSITY CALIBRATION STANDARDS 

Cold-Cranking Simulator Standards (CCS) 

ASTM D 5293 

APPLICATION 

ISO 17025 and ISO Guide 34 certified CCS viscosity standards are for the calibration and verification of 

analytical equipment used in Cold Crank Simulator (CCS) oil testing to ASTM D 5293 and SAE Specification 

J300. 


UKAS certified to ISO 17025 Quality System. 

UKAS certified to ISO Guide 34. 

Standard Pack Size 500 mL. 

Fully traceable to National Standards. 

Ensures full compliance to ASTM & IP test method protocol. 

Tamper evident security packaging. 

2 year shelf life. 

CCS standards 

Reference number -5°C -10°C -15°C -20°C -25°C -30°C -35°C Pack Size 

CL080 - - - - - - 899 500mL 

CL090 - - - - - - 1082 500mL 

CL100 - - - - - 868.8 1733 500mL 

CL110 - - - - - 1419 2363 500mL 

CL120 - - - - 844.1 1627 3396 500mL 

CL130 - - - - 1707 2826 4895 500mL 

CL140 - - - 851 1605 3252 7133 500mL 

CL150 - - - 1625 2632 4460 7955 500mL 

CL160 - - - 1346 2632 5550 12678 500mL 

CL170 1354 2147 3540 6104 11114 500mL 

CL190 - - 973.2 1805 3585 7644 17758 500mL 

CL200 - - 1553 2466 4064 7032 12866 500mL 

CL220 - - 1321 2522 5170 11396 - 500mL 

CL240 - - 2143 3482 5884 10474 19722 500mL 

CL250 - 987.7 1797 3497 7295 16451 - 500mL 

CL260 - 1676 2644 4320 7357 13203 - 500mL 

CL280 - 1309 2435 4804 10274 - - 500mL 

CL300 - 2287 3648 6033 10448 19012 - 500mL 

CL320 - 1845 3538 7236 16084 - - 500mL 

CL340 - 2555 4085 6794 11832 - - 500mL 

CL380 - 2901 5815 12660 - - - 500mL 

CL420 - 5089 8370 14409 - - - 500mL 

CL480 2362 4561 9527 21354 - - - 500mL 

CL530 - 5922 9812 17002 - - - 500mL 

CL600 3649 7204 15320 - - - - 500mL 

CL680 - 9597 - - - - - 500mL 

CL740 5833 11934 - - - - - 500mL 

Nominal Values (mPa.s) 

REF VIS-CCS-8 Viscosity Reference Standard Viscosity Standard Set, Cold Crank Simulator Type CL14, CL19, 

CL22, CL25, CL28, CL32, CL48, CL74. UKAS ISO 17025 / ISO Guide 34 Certified 8 x 500ml 

REF VIS-CCS-14 Viscosity Reference Standard Viscosity Standard Set, Cold Crank Simulator Type CL10, CL12, 

CL14, CL16, CL19, CL22, CL25 (2) , CL28, CL32, CL38, CL48, CL60, CL74. UKAS ISO 17025 

/ ISO Guide 34 Certified 14 x 500ml 

REF CCS-1L Any CCS Viscosity Standard, 1L pack size i.e. CL25-1L 







sales@tamson.com

27 

General Purpose Viscosity Reference Standards 

ASTM D 2162 – ASTM D 1480 – ISO 17025 

APPLICATION 

ISO 17025 and ISO Guide 34 certified viscosity standards are for the calibration and verification of glass 

capillary viscometers and other viscosity measuring equipment where operating temperature is controlled 

precisely. 




Manufactured in accordance with ASTM D 2162. 

Density g/mL in accordance with ASTM D 1480. 

Kinematic (cSt) & dynamic viscosity (mPa.s) given at all temperatures. 






Viscosity Reference Standards 

REFERENCE 

number 

Viscosity 

standard 

VISCOSITY STANDARDS (Flask of 500 mL) - with UKAS certificate 

Approximate Kinematic Viscosity in mm 2 /s (Centistokes) 

20°C 25°C 37.78°C 40°C 50°C 60°C 80°C 98.89°C 100°C 

25T0726* N0.4 

25T0727* N0.8 

25T0728* N1.0 

25T0729 

25T0700 

25T0708 

25T0701 

25T0709 

25T0730 

25T0738 

25T0702 

25T0731 

25T0703 

25T0732 

25T0704 

25T0711 

25T0733 

25T0713 

25T0705 

25T0734 

25T0706 

25T0714 

25T0736 

25T0735 

25T0707 

25T0736 

25T0722 

N2 

S3 

D5 

S6 

D10 

N10 

N14 

S20 

N35 

S60 

N100 

S200 

D500 

N350 

D1000 

S600 

N1000 

S2000 

D5000 

D7500 

N4000 

S8000 

N15000 

S30000 

0.4739 0.4583 0.4087 0.4015 - - - - - 

0.6525 0.6205 0.5495 0.5385 - - - - - 

1.276 1.189 1.006 0.9803 0.8729 - - - - 

2.437 2.216 1.776 1.715 1.476 - - - - 

4.565 4.035 3.048 2.915 2.420 2.047 1.534 1.218 1.202 

7.056 6.086 - 4.137 3.321 - - - 1.493 

10.39 8.792 6.048 5.706 4.470 3.601 2.500 1.884 1.855 

14.93 12.42 8.207 7.693 5.880 4.641 3.115 2.292 2.255 

20.92 17.01 10.70 9.957 7.395 5.701 3.693 2.650 2.602 

30.30 24.46 15.12 14.03 10.28 7.812 4.939 3.477 3.413 

43.51 34.11 19.79 18.18 12.82 9.447 5.703 3.892 3.820 

85.18 65.07 35.51 32.30 21.84 15.51 8.805 5.743 5.617 

160.5 118.7 60.16 54.07 34.87 23.77 12.62 7.855 7.660 

331.5 238.3 113.1 100.6 62.01 40.63 20.20 11.98 11.65 

649.2 456.2 204.9 180.6 107.1 67.77 31.78 18.03 17.49 

829.5 578.1 - 223.6 130.8 - 37.54 - 20.33 

1235 851.2 365.5 319.9 183.8 112.9 50.20 27.33 26.48 

1696 1159 - 422.8 238.8 - - - 32.15 

2146 1455 598.0 520.0 289.6 172.8 73.11 38.13 37.05 

4490 2981 1165 1004 537.8 309.0 122.2 60.70 58.52 

7946 5222 1983 1700 889.6 499.2 188.8 90.25 86.80 

8626 5644 - 1818 945.2 - - - 89.83 

13383 8702 3207 2735 1397 765.5 - - 122.0 

17966 11627 4216 3589 1811 981.2 345.9 155.4 149.1 

35264 22566 7981 6748 3327 1760 588.8 252.5 241.4 

70582 44855 15541 13087 6342 3289 1054 433.5 413.1 

- 79747 27285 22946 10993 5623 1756 700.1 666.5 

*Hazardous to ship, additional surcharge for shipping. 

REF GP-1L 

REF GP-5L 

REF GP-20L 

Any General Purpose Viscosity Standard , 1L pack size i.e. S60-1L 







sales@tamson.com

28 

Low Temperature Viscosity Standards 

APPLICATION 

ISO 17025 and ISO Guide 34 certified low temperature viscosity standards are for the calibration and 

verification of glass capillary viscometers and other viscosity measuring equipment where operating 

temperature is controlled precisely. 









Low Temperature Viscosity Standards 

VISCOSITY STANDARDS (Flask of 500 mL) - with UKAS certificate 

Reference number 

Temperature 

Viscosity Range 

mm2/s (cSt) 

Dynamic Viscosity 

mPa.s (cP) 

Density 

mPa.s (cP) 

°C °F 

JF1* -20 -4 3.755 

J10 -40 -40 898.0 

J13 -10 ** 309.8 

JF2* -40 -40 7.279 

N2B 0 

-20 

N27B -17.78 

-23.33 

-26.11 

-28.89 

-34.44 

-40 

N105B -19 

-19.5 

-20 

-20.5 

-21 

-25 

N115B -6.67 

-12.22 

-17.78 

-23.33 

-26.11 

-28.89 

N120B -39 

-39.50 

-40 

-40.50 

-41 

N400B -24 

-24.5 

-25 

-25.5 

-26 

N480B -25 

-25.5 

-26 

-26.11 

-26.5 

-27 

N1400B -11 

-11.5 

-12 

-12.22 

-12.5 

-13 

32 

-4 

0 

-10 

-15 

-20 

-30 

-40 

-2.2 

-3.1 

-4 

-4.9 

-5.8 

-13 

20 

10 

0 

-10 

-15 

-20 

-38.20 

-39.10 

-40 

-40.90 

-41.80 

-11.2 

-12.1 

-13 

-13.9 

-14.8 

-13 

-13.9 

-14.8 

-15 

-15.7 

-16.6 

12.2 

11.3 

10.4 

10 

9.5 

8.6 

3.813 

6.951 

1250 

2566 

3803 

5752 

14328 

40225 

30370 

32370 

34350 

36510 

38690 

64720 

11054 

19758 

37204 

74636 

109055 

162919 

145950 

158130 

171623 

186276 

202414 

59860 

63970 

68480 

73170 

78180 

128500 

142500 

158200 

162600 

175200 

196000 

136300 

148700 

163300 

169100 

177500 

193700 

All values stated are nominal 


3.113 

5.778 

1145 

2360 

3504 

5313 

13281 

37449 

26470 

28220 

29960 

31850 

33770 

56650 

9533 

17108 

32353 

65157 

95380 

142782 

127779 

138474 

150342 

163234 

177436 

52340 

55950 

59920 

64050 

68450 

120400 

133600 

148400 

152500 

164400 

184000 

126100 

137600 

151200 

156500 

164300 

179400 

0.8163 

0.8312 

0.9159 

0.9197 

0.9214 

0.9237 

0.9269 

0.9310 

0.8716 

0.8719 

0.8722 

0.8725 

0.8729 

0.8753 

0.8624 

0.8659 

0.8696 

0.8730 

0.8746 

0.8764 

0.8755 

0.8757 

0.8760 

0.8763 

0.8766 

0.8744 

0.8747 

0.8750 

0.8753 

0.8756 

0.9373 

0.9376 

0.9378 

0.9380 

0.9383 

0.9386 

0.9250 

0.9253 

0.9256 

0.9257 

0.9258 

0.9261 





sales@tamson.com

29 

High Temperature Viscosity Standards 

APPLICATION 

ISO 17025 and ISO Guide 34 certified high temperature viscosity standards are for the calibration and 

verification of glass capillary viscometers and other viscosity measuring equipment where operating 

temperature is controlled precisely. 




Standard Pack Size 1 Liter. 





High Temperature Viscosity Standards 

REF VIS-HT75 

REF VIS-HT150 

REF VIS-HT240 

REF VIS-HT390 

Viscosity Reference Standard High Temperature Viscosity Standard Certified Value 

2.444 mPa.s @ 150°C 1L 

Viscosity Reference Standard High Temperature Certified Value 3.24 mPa.s @ 

150°C 1L 


5.33 mPa.s @ 150°C 1L 


5.74 mPa.s @ 150°C 1L 

Medical Viscosity Standards 

ASTM D 2162 

APPLICATION 

For the calibration and verification of viscosity measuring equipment typically used for measuring blood 

plasma. 








Medical Viscosity Standards 

Reference number Type mPa.s (cP) 25°C Pack Size 

MGVS12-100 RT5 1.2 100mL 

MGVS12-500 RT10 1.2 500mL 

MGVS16-100 RT50 1.6 100mL 

MGVS16-500 RT75 1.6 500mL 

MGVS100-500 RT100 10.0 500mL 

MGVS20-100 RT250 2.0 100mL 

MGVS20-500 RT350 2.0 500mL 





sales@tamson.com

30 

Rotational Viscosity Standards 

APPLICATION 

ISO 17025 and ISO Guide 34 certified silicone viscosity standards are specifically formulated for use with 

rotational viscometers. Supplied in 600 mL 'ready to use' packs specially designed to eliminate the requirement 

to transfer the sample to a test beaker. Safer working, less mess, less waste, higher throughput. 









Rotational Viscosity Standards 

Reference number Type mPa.s (cP) 20°C mPa.s (cP) 25°C Pack Size 

VIS-RT5-600 RT5 5.431 4.972 600mL 

VIS-RT10-600 RT10 10.89 9.972 600mL 

VIS-RT50-600 RT50 54.43 49.53 600mL 

VIS-RT75-600 RT75 84.55 77.03 600mL 

VIS-RT100-600 RT100 111.6 101.5 600mL 

VIS-RT250-600 RT250 275.7 250.7 600mL 

VIS-RT350-600 RT350 386.6 351.5 600mL 

VIS-RT500-600 RT500 561.1 509.4 600mL 

VIS-RT1K-600 RT1000 1126 1018 600mL 

VIS-RT5K-600 RT5000 5492 4962 600mL 

VIS-RT10K-600 RT10000 11142 10040 600mL 

VIS-RT12K-600 RT12000 14159 12769 600mL 

VIS-RT30K-600 RT30000 33168 29907 600mL 

VIS-RT60K-600 RT60000 67226 60586 600mL 

VIS-RT100K-600 RT100000 110159 99565 600mL 





sales@tamson.com

31 

Cone and Plate Standards (CAP) 

ASTM D 1480 – ASTM D 2162 

APPLICATION 

ISO 17025 and ISO Guide 34 certified cone and plate viscosity standards are specifically formulated for the 

paint and coatings industry, and represent the most comprehensive range of standards available for this 

application. 












Cone & Plate Standard 

Temperature Viscosity (nominal values only) Density Package 

Reference (ºC) (ºF) Kinematic mm 2 /s (cSt) Dynamic mPa.s (cP) Krebs (KU) (g/mL) size 

number 

2162/1 20.00 68.00 85.18 72.84 44.00 0.8551 500mL 

21.00 69.80 80.59 66.86 43.60 0.8545 

22.00 71.60 76.30 65.14 43.30 0.8538 

23.00 73.40 72.30 61.69 43.00 0.8532 

24.00 75.20 68.54 58.43 42.70 0.8525 

25.00 77.00 65.07 55.43 42.40 0.8519 

2162/2 20.00 68.00 116.8 100.6 46.30 0.8613 500mL 

21.00 69.80 110 94.68 45.80 0.8607 

22.00 71.60 103.8 89.27 45.40 0.8600 

23.00 73.40 98.03 84.25 44.90 0.8594 

24.00 75.20 92.61 79.52 44.50 0.8587 

25.00 77.00 87.62 75.19 44.20 0.8581 

2162/3 20.00 68.00 160.1 138.3 49.20 0.8641 500mL 

21.00 69.80 150.4 129.9 48.60 0.8635 

22.00 71.60 141.4 122.0 49.60 0.8629 

23.00 73.40 133.1 114.8 47.40 0.8622 

24.00 75.20 125.4 108.0 48.60 0.8616 

25.00 77.00 118.3 101.9 46.40 0.8610 

2162/4 20.00 68.00 239.8 207.7 54.00 0.8741 500mL 

21.00 69.80 224.4 194.2 53.10 0.8551 

22.00 71.60 210.4 182.0 52.30 0.8545 

23.00 73.40 197.3 170.5 51.50 0.8538 

24.00 75.20 185.3 160.0 50.80 0.8532 

25.00 77.00 174.2 150.3 50.10 0.8525 

2162/5 20.00 68.00 324.8 218.9 58.50 0.8678 500mL 

21.00 69.80 303.1 262.8 57.40 0.8672 

22.00 71.60 283.7 245.9 56.40 0.8666 

23.00 73.40 265.5 229.9 55.40 0.8659 

24.00 75.20 248.8 215.3 54.50 0.8653 

25.00 77.00 233.4 201.8 53.60 0.8647 

2162/6 20.00 68.00 405.3 352.3 62.30 0.8692 500mL 

21.00 69.80 377.7 328.1 61.00 0.8686 

22.00 71.60 353.0 306.4 59.80 0.8679 

23.00 73.40 329.7 285.9 58.70 0.8673 

24.00 75.20 308.4 267.3 57.60 0.8666 

25.00 77.00 288.9 250.2 56.60 0.8660 

2162/7 20.00 68.00 488.1 423.6 65.80 0.8679 500mL 

21.00 69.80 455.5 395.0 64.40 0.8673 

22.00 71.60 425.3 368.6 63.10 0.8667 

23.00 73.40 397.1 343.9 61.80 0.8660 

24.00 75.20 371.3 321.3 60.70 0.8654 

25.00 77.00 347.8 300.8 59.50 0.8648 





sales@tamson.com

32 

Temperature Viscosity Density 

Package 

(nominal 

values 

only) 

Reference (ºC) (ºF) Kinematic mm2/s (cSt) Dynamic Krebs (g/mL) size 

number 

mPa.s (cP) (KU) 

2162/8 20.00 68.00 574.5 500.3 69.20 0.8709 500mL 

21.00 69.80 534.1 464.8 67.60 0.8703 

22.00 71.60 497.8 432.9 66.20 0.8697 

23.00 73.40 464.0 403.2 64.80 0.8690 

24.00 75.20 433.0 376.0 63.50 0.8684 

25.00 77.00 404.6 351.1 62.20 0.8678 

2162/9 20.00 68.00 643.4 559.9 71.60 0.8702 500mL 

21.00 69.80 598.7 520.6 70.00 0.8696 

22.00 71.60 557.3 484.3 68.50 0.8690 

23.00 73.40 519.5 451.1 67.00 0.8683 

24.00 75.20 484.5 420.4 65.60 0.8677 

25.00 77.00 452.2 392.1 64.30 0.8671 

2162/10 20.00 68.00 830.7 723.6 77.60 0.8711 500mL 

21.00 69.80 771.1 671.2 75.80 0.8705 

22.00 71.60 716.5 623.3 74.00 0.8699 

23.00 73.40 666.7 579.6 72.40 0.8693 

24.00 75.20 620.9 539.4 70.80 0.8687 

25.00 77.00 579.4 503.0 69.30 0.8681 

2162/11 20.00 68.00 1235 1078 88.00 0.8727 500mL 

21.00 69.80 1145 998.6 85.90 0.8721 

22.00 71.60 1061 924.7 83.80 0.8715 

23.00 73.40 985.7 858.4 81.90 0.8709 

24.00 75.20 915.5 796.8 80.00 0.8703 

25.00 77.00 851.2 740.3 78.20 0.8697 

2162/12 20.00 68.00 1696 1483 97.10 0.8745 500mL 

21.00 69.80 1569 1371 94.80 0.8739 

22.00 71.60 1452 1268 92.50 0.8733 

23.00 73.40 1346 1175 90.40 0.8727 

24.00 75.20 1248 1088 88.20 0.8721 

25.00 77.00 1159 1010 86.20 0.8715 

2162/13 20.00 68.00 2573 2260 110.2 0.8783 500mL 

21.00 69.80 2372 2082 107.4 0.8776 

22.00 71.60 2190 1921 104.9 0.8770 

23.00 73.40 2024 1774 102.5 0.8763 

24.00 75.20 1872 1639 100.1 0.8757 

25.00 77.00 1734 1517 97.80 0.8750 

2162/14 20.00 68.00 4318 3804 129.6 0.8809 500mL 

21.00 69.80 3970 3495 126.3 0.8803 

22.00 71.60 3656 3216 123.0 0.8797 

23.00 73.40 3370 2963 119.9 0.8791 

24.00 75.20 3109 2731 116.9 0.8785 

25.00 77.00 2871 2520 114.0 0.8779 

2162/15 20.00 68.00 6887 6082 149.3 0.8831 500mL 

21.00 69.80 6320 5577 145.5 0.8825 

22.00 71.60 5813 5127 141.9 0.8820 

23.00 73.40 5343 4709 138.3 0.8814 

24.00 75.20 4918 4332 134.8 0.8809 

25.00 77.00 4533 3990 131.5 0.8803 

2162/16 20.00 68.00 10450 9245 168.4 0.8847 500mL 

21.00 69.80 9579 8469 164.3 0.8841 

22.00 71.60 8798 7765 160.2 0.8835 

23.00 73.40 8073 7218 156.3 0.8830 

24.00 75.20 7423 6550 152.5 0.8824 

25.00 77.00 6830 6023 148.8 0.8818 

2162/17 20.00 68.00 14057 12469 182.8 0.8870 500mL 

21.00 69.80 12857 11396 178.4 0.8864 

22.00 71.60 11797 10450 174.2 0.8858 

23.00 73.40 10818 9577 170.0 0.8853 

24.00 75.20 9926 8782 165.9 0.8847 

25.00 77.00 9120 8063 162.0 0.8841 

2162/18 20.00 68.00 17855 15843 194.9 0.8873 500mL 

21.00 69.80 16325 14475 190.3 0.8867 

22.00 71.60 14916 13257 185.9 0.8861 

23.00 73.40 13710 12142 181.5 0.8856 

24.00 75.20 12579 11132 177.3 0.8850 

25.00 77.00 11543 10209 173.1 0.8844 





sales@tamson.com

33 

Temperature Viscosity (nominal Density 

Package 

values only) 

Reference (ºC) (ºF) Kinematic 

Dynamic Krebs (g/mL) size 

number 

mm2/s (cSt) mPa.s (cP) (KU) 

2162/19 20.00 68.00 26606 23690 215.8 0.8904 500mL 

21.00 69.80 24281 21605 211.0 0.8898 

22.00 71.60 22246 19783 206.3 0.8893 

23.00 73.40 20355 18089 201.7 0.8887 

24.00 75.20 18609 16529 197.0 0.8882 

25.00 77.00 17086 15166 192.7 0.8876 

2162/20 20.00 68.00 34947 31148 231.0 0.8913 500mL 

21.00 69.80 32067 28564 226.0 0.8908 

22.00 71.60 29260 26048 221.1 0.8902 

23.00 73.40 26760 23808 216.3 0.8897 

24.00 75.20 24497 21781 211.6 0.8891 

25.00 77.00 22388 19894 207.0 0.8886 

2162/21 20.00 68.00 20.92 17.82 38.80 0.8516 500mL 

21.00 69.80 20.04 17.05 38.80 0.8510 

22.00 71.60 19.22 16.34 38.70 0.8503 

23.00 73.40 18.44 15.67 38.60 0.8497 

24.00 75.20 17.70 15.03 38.60 0.8490 

25.00 77.00 17.01 14.43 38.50 0.8484 

2162/22 20.00 68.00 42.26 35.92 40.60 0.8499 500mL 

21.00 69.80 40.23 34.17 40.50 0.8493 

22.00 71.60 38.37 32.56 40.30 0.8486 

23.00 73.40 36.60 31.04 40.20 0.8480 

24.00 75.20 34.92 29.59 40.00 0.8473 

25.00 77.00 33.37 28.25 39.90 0.8467 

2162/24 20.00 68.00 3425 3010 120.5 0.8787 

21.00 69.80 3155 2770 117.4 0.8781 

22.00 71.60 2911 2555 114.5 0.8775 

23.00 73.40 2688 2357 111.6 0.8770 

24.00 75.20 2485 2178 108.9 0.8764 

25.00 77.00 2299 2013 106.3 0.8758 





sales@tamson.com

34 

Flow Cup Standards 

ASTM D 1480 – ASTM D 2162 

APPLICATION 

ISO 17025 and ISO Guide 34 certified flow cup viscosity standards are specifically formulated for use with 

viscosity flow cups such as Ford, Shell, and Zahn. 












Flow Cup Standard 

Reference 

number 

Kinematic 

Viscosity 

mm²/s (cSt) 

Dynamic 

Viscosity 

mPa.s (cP) 

Density 

(g/mL) 

Certified Value at 20°C 

Size 

DIN CUP FORD CUP ISO CUP SHELL CUP ZAHN CUP 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

C6 10.40 8.600 0.8272 1 56.2 3mm 36 1 

2 

C10 20.90 17.80 0.8516 1 77.7 3mm 55.4 2 

2.5 

C20 42.60 36.30 0.8508 2 47.6 3mm 

4mm 

C35 78.60 67.50 0.8587 2 

3 

C60 160.1 138.3 0.8641 4mm 37.7 2 

3 

4 

C100 327.3 283.5 0.8861 4mm 73 3 

4 

72.6 

40.6 

100.7 

35.2 

3 

3.5 

4mm 59.8 2.5 

3 

3.5 

4 

C200 643.4 559.9 0.8702 4mm 141.5 5 55.2 6mm 94.1 5 

6 

C350 1235 1078 0.8727 5 104.1 6 76.7 4 

5 

129.2 

75.9 

46.1 

89.5 

29 

4mm 

5mm 

5mm 

6mm 

118.1 

50.1 

100.5 

49.1 

3.5 

4 

5 

4 

5 

6 

59 

23 

41.3 

25.6 

30.2 

21.1 

88 

54.1 

37.7 

23.8 

75.3 

47.4 

25.6 

95.9 

51.4 

20.7 

1 38.4 

1 48 

1 

2 

67.7 

26.2 

2 36.5 

C600 2134 1870 0.8761 5 92.8 

100 

40.2 

2 

3 

2 

3 

4 

3 

4 

5 

59.7 

21.2 

107.5 

35.5 

27.7 

62.5 

48.5 

28 

88.4 

53.7 

Certified Value at 25°C 

Reference 

number 

Kinematic 

Viscosity 

mm²/s (cSt) 

Dynamic 

Viscosity 

mPa.s (cP) 

Density 

(g/mL) 

Size 

DIN CUP FORD CUP ISO CUP SHELL CUP ZAHN CUP 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

Size 

Drain 

Time(s) 

C6 8.800 7.200 0.8238 1 52.9 3mm 33.4 1 

2 

C10 17.00 14.40 0.8484 1 69.7 3mm 47.8 2 

2.5 

C20 33.50 28.40 0.8474 2 41.3 3mm 

4mm 

C35 60.10 51.40 0.8555 2 

3 

C60 118.3 101.9 0.8610 4mm 29.3 2 

3 

4 

C100 236.4 204.0 0.8630 4mm 53.6 4 

5 

59.7 

32.6 

81.3 

29.4 

3 

3.5 

4mm 47 2.5 

3 

3.5 

4 

C200 452.2 392.1 0.8671 4mm 99.9 5 39.4 6mm 66.8 5 

6 

C350 851.2 740.3 0.8697 5 72.3 6 53 4 

5 

100.2 

57.8 

35.2 

65.9 

21.5 

4mm 

5mm 

5mm 

6mm 

88 

37.8 

73 

36.5 

3.5 

4 

5 

4 

5 

6 

51.9 

20.3 

34.5 

21.4 

24.2 

17 

68 

41.8 

29.2 

18.4 

56 

35.3 

19.2 

69.5 

37.4 

15.1 

1 37 

1 44.5 

1 

2 

59.5 

23.6 

2 31.2 

C600 1449 1265 0.8732 5 63 

70.6 

28.4 

2 

3 

2 

3 

4 

3 

4 

5 

47.8 

17.6 

81.5 

27.7 

21 

46.1 

35.6 

19.7 

62.5 

37 





sales@tamson.com

35 

CERTIFIED MEASUREMENT & CALIBRATION 

STANDARDS 

Total Base Number Reference Standards 

ASTM D 2896 - IP 276 

APPLICATION 

The TBN Standards are specifically manufactured for the verification of analytical instruments used to 

determine base number by potentiometric titration. Typically used in, but not limited to, the analysis of used 

oils and lubricants. 


TBN tested and certified in accordance with ASTM D 2896 / IP 276. 


Fully traceable to International Standards. 

Supplied in tamper evident packaging with a 24 month shelf life. 

Available as a triple pack. 

Product 

Reference 

number 

Certified Value 

Pack size 

TBN1 25T2007 0.99 mg KOH/g 1 x 50g 

TBN1/3 25T2007-3 0.99 mg KOH/g 3 x 50g 

TBN3 25T2008 3.01 mg KOH/g 1 x 50g 

TBN3/3 25T2008-3 3.01 mg KOH/g 3 x 50g 

TBN6 25T2009 6.08 mg KOH/g 1 x 50g 

TBN6/3 25T2009-3 6.08 mg KOH/g 3 x 50g 

TBN10 25T2010 9.93 mg KOH/g 1 x 50g 

TBN10/3 25T2010-3 9.93 mg KOH/g 3 x 50g 

TBN15 25T2012 15.10 mg KOH/g 1 x 50g 

TBN15/3 25T2012-3 15.10 mg KOH/g 3 x 50g 

TBN30 25T2013 30.43 mg KOH/g 1 x 50g 

TBN30/3 25T2013-3 30.43 mg KOH/g 3 x 50g 

TBN40 25T2014 40.51 mg KOH/g 1 x 50g 

TBN40/3 25T2014-3 40.51 mg KOH/g 3 x 50g 

TBN70 25T2015 70.24 mg KOH/g 1 x 50g 

TBN70/3 25T2015-3 70.24 mg KOH/g 3 x 50g 

TBN Standard 





sales@tamson.com

36 

Total Acid Number Reference Standards 

ASTM D 664 - IP 177 

APPLICATION 

TAN standards are specifically manufactured for the verification of analytical instruments used to determine 

acid number by potentiometric titration. Typically used in, but not limited to, the analysis of used oils and 

lubricants. 


TAN tested and certified in accordance with ASTM D 664 / IP 177. 




Available as a triple pack. 

Product 

Reference 

number 

Certified Value 

Pack size 

TAN001 25T2000 0.10mg KOH/g 1 x 125g 

TAN001/3 25T2000-3 0.10 mg KOH/g 3 x 125g 

TAN005 25T2001 0.48 mg KOH/g 1 x 125g 

TAN005/3 25T2001-3 0.48 mg KOH/g 3 x 125g 

TAN010 25T2002 0.99 mg KOH/g 1 x 125g 

TAN010/3 25T2002-3 0.99 mg KOH/g 3 x 125g 

TAN015 25T2003 1.54 mg KOH/g 1 x 125g 

TAN015/3 25T2003-3 1.54 mg KOH/g 3 x 125g 

TAN020 25T2004 2.03 mg KOH/g 1 x 50g 

TAN020/3 25T2004-3 2.03 mg KOH/g 3 x 50g 

TAN025 25T2005 2.48 mg KOH/g 1 x 50g 

TAN025/3 25T2005-3 2.48 mg KOH/g 3 x 50g 

TAN030 25T2006 2.93 mg KOH/g 1 x 50g 

TAN030/3 25T2006-3 2.93 mg KOH/g 3 x 50g 

TAN050 TAN050 4.57 mg KOH/g 1 x 50g 

TAN050/3 TAN050/3 4.57 mg KOH/9 3 x 50g 

TAN Standards 





sales@tamson.com

37 

Lithium Chloride Electrolyte 

ASTM D 664 - IP 177 

APPLICATION 

A high quality analytical reagent manufactured and certified compliant for use in ASTM D 664 / IP 177, the 

Standard Test Method for Acid Number of Petroleum products by Potentiometric Titration. 


Manufactured to ASTM D 664 / IP 177. 

Provided with a certificate which includes an estimation of uncertainty of manufacture. 

Ensures full compliance with ASTM and IP test method requirements for reagent preparation. 

Convenient 30mL bottle size for direct filling into the electrode. 

Multi pack option available 

Cost effective and time saving 

Certificate of Manufacture & MSDS included 

6 Month shelf life 

REF LCL-30-3 

REF LCL-30-5 

REF LCL-30-10 

2M Lithium Chloride Electrolyte, Electrode Filling Solution 3 x 30ml 



2M LCE 

Standards 

Synthetic Seawater 

ASTM D 665 - IP 135 

APPLICATION 

A high quality analytical reagent manufactured and certified compliant for use in ASTM D 665 / IP 135 the 

Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water. 


A Synthetic Sea Water Analytical Reagent manufactured in accordance with ASTM D 665 / IP 135. 

Provided with a certificate which includes an estimation of uncertainty of manufacture. 

Ensures full compliance with ASTM and IP test method requirements for reagent preparation. 

Conveniently packaged in single dose or multi dose packs. 

Cost effective and time saving 

Certificate of Manufacture & MSDS included 

12 month shelf life 

Synthetic Seawater Standard 

REF SSWS-30 

REF SSWS-300 

REF SSWS-500 

REF SSWS-5L 

Synthetic Sea Water for ASTM 665 / IP 135, 10 x 30ml 



Synthetic Sea Water for ASTM 665 / IP 135, 1 x 5 L 





sales@tamson.com

38 

Colour Standards 

ASTM D 156 - D 1209 - D 1500 – D 1544 – D 6045 – D 6166 

APPLICATION 

For routine calibration of colour measuring instruments and verification of 

test data. Process industries throughout the world use colorimeters for colour 

control of products such as edible and industrial oils, fuels, chemicals, 

pharmaceuticals, paints and coatings. 

Lovibond colour reference standards are manufactured by Paragon Scientific 

Ltd, and certified by The Tintometer Limited. Each standard is issued with a 

Certificate of Calibration, which confirms that the product has been 

manufactured and tested under the control of Tintometer's ISO 9001 Quality 

Management System and conform in all respects with the stated standard or 

test method. 

Colour Standard 


Certified under ISO 9001 Quality system. 

Full Traceability to International Standards. 

500mL Pack Size supplied with MSDS. 

12 or 18 months shelf life. 


Colour Scale Description Reference Number Accreditation 

AOCS-Tintometer Colour 0.3R 1.7Y (5¼") 134240 ISO 9001 

(AOCS Cc 13j-97, Cc 13b-45) 1.3R 8.8Y (5¼") 134250 ISO 9001 

1.7R 12Y (5¼") 134260 ISO 9001 

3.0R 22Y (5¼") 134270 ISO 9001 

3.6R 34Y (5¼") 134280 ISO 9001 

ASTM Colour

39 

Conductivity Standards 

APPLICATION 

For the verification and calibration of analytical equipment used for the determination of conductivity. Widely 

used in industries such as petrochemical, pharmaceutical, utilities, etc. 


Traceable to N.I.S.T standard reference materials. 

Temperature dependence data lot number and expiry date printed on all product labels. 

Solutions standardised at 25°C. 

Accuracy ± 1 %. 

Reference Description Temp Pack Size Shelf Life 

number. 

CSKC13 1.30 Micro Siemens/cm 25°C 1x250mL 3 months 

CSKC136 1.30 Micro Siemens/cm 25°C 6x250mL 3 months 

CSKC5 5 Micro Siemens/cm 25°C 500mL 6 months 






CSKCS 147 Micro Siemens/cm 25°C 500mL 12 months 






CSKC1000 1,000 Micro Siemens/cm 25°C 500mL 18 months 

CSKCL 1413 Micro Siemens/cm 25°C 500mL 18 months 

CSKC2M 2o00 Micro Siemens/cm 25°C 500mL 18 months 


CSKC5M 5,000 Micro Siemens/cm 25°C 500mL 18 months 


CSKC12880 12,880 Micro Siemens/cm 25°C 500mL 18 months 










CSKC450M 450,000 Microdiamond/cm 25°C 500mL 18 months 


Conductivity Standard 





sales@tamson.com

40 

Sucrose Brix / Refractive Index Standards 

APPLICATION 

ISO 17025 and ISO Guide 34 certified brix standards are for the calibration and 

verification of all types of refractometer e.g. handheld, Abbe and high accuracy digital 

instruments. Typically used within the food and beverage and pharmaceutical 

industries. 


UKAS accredited to BS/EN/IEC/ISO 17025. 


Primary refractive index standards traceable to National Standards. 

Manufactured in accordance with ICUMSA Methods. 

Supplied in tamper evident packs with 6 weeks shelf life. 

Manufactured in the United Kingdom. 

Monthly delivery contracts available for economy and convenience. 

Sucrose Brix 

Reference 

number 

Shelf Life Brix Certified Value Index Pack Size 

SS00 6 Weeks 0 Pure Water 1.33299 15mL 

SS05 6 Weeks 5 5 +/-0.02% 1.34026 15mL 

SS075 6 Weeks 7.5 7.5 +/-0.02% 1.34400 15mL 

SS10 6 Weeks 10 10 +/-0.02% 1.34782 15mL 

SS112 6 Weeks 11.2 11.2 +/-0.02% 1.34968 15mL 

SS115 6 Weeks 11.5 11.5 +/-0.02% 1.35015 15mL 

SS12 6 Weeks 12 12 +/-0.02% 1.35092 15mL 

SS125 6 weeks 12.5 12.5 +/-0.02% 1.35171 15mL 

SS15 6 Weeks 15 15 +/-0.02% 1.35568 15mL 

SS20 6 Weeks 20 20 +/-0.02% 1.36384 15mL 

SS25 6 Weeks 25 25 +/-0.02% 1.37233 15mL 

SS30 6 Weeks 30 30 +/-0.02% 1.38115 15mL 

SS35 6 Weeks 35 35 +/-0.02% 1.39032 15mL 

SS40 6 Weeks 40 40 +/-0.02% 1.39986 15mL 

SS45 6 Weeks 45 45 +/-0.02% 1.40978 15mL 

SS50 6 Weeks 50 50 +/-0.02% 1.42009 15mL 

SS55 6 Weeks 55 55 +/-0.02% 1.43080 15mL 

SS60 6 Weeks 60 60 +/-0.02% 1.44193 15mL 

Oil Refractive Index Standards 

APPLICATION 

Calibration Oils are one of the most commonly used materials for calibrating refractometers as they have good 

traceability, particularly to NIST. Having a high temperature co-efficient, calibration oils are used where strict 

temperature control is adopted, either by Peltier or external waterbath between 10 and 75 °C. Calibration Oils are 

batch manufactured and so values may differ slightly from published data. Oils are supplied in multipacks of 5 x 5ml 

bottles with a certificate of calibration, MSDS and pipettes and have an expiry date 12-months from date of 

dispatch. 

For refractometers operating at high temperatures where water starts to evaporate, an oil may be used as a zero 

calibration medium. Typical applications include those in the confectionery, edible oil and mineral oil marketplaces. 

Reference 

number 

Shelf Life From 

DOM 

Product Nature Temperature °C Certified RI Value Package 

Type 

Package 

Size 

PS-RI-BSDC 12 Months Silicone Fluid 20 1.51000 Glass 5 x 5mL 

PS-RI-BSLP 12 Months Liquid Paraffin 20 1.46700 Glass 5 x 5mL 

PS-RI-BSDD 12 Months Liquid Paraffin 20 1.56000 Glass 5 x 5mL 





sales@tamson.com

41 

Density Standards 

ASTM D 1480 

APPLICATION 

ISO 17025 and ISO Guide 34 certified Density standards are for the verification of instruments used to 

measure density of materials which are fluid at the desired test temperature within the range of 15°C to 

150°C. 


UKAS certified to ISO 17025. 



Ensures full compliance to ASTM and IP test method protocols. 

Supplied in tamper evident packaging with a 2 year shelf life. 

Available as single bottle packs or triple pack kits. 

Holographically marked to assure authenticity. 

Reference Temperature Nominal certified value g/mL Package Size 

number 

PDEN-WAT 25°C 0.9970 60 mL 

PDEN-WAT3 25°C 0.9970 3 x 60mL 

PDEN15K1* 15°C 0.7060, 0.8060, 0.8800 3 x 100mL 

PDEN15-1* 15°C 0.7056 100mL 

PDEN15-3 15°C 0.8056 100mL 

PDEN15-5 15°C 0.8548 100mL 

PDEN15-8 15°C 0.8805 100mL 

PDEN20K1 20°C 0.8020, 0.8300, 0.8720 3 x 100 mL 

PDEN20-1* 20°C 0.6670 100 mL 

PDEN20-2* 20°C 0.7370 100 mL 

PDEN20-3* 20°C 0.7760 100 mL 

PDEN20-4 20°C 0.8020 100 mL 

PDEN20-5 20°C 0.8110 100 mL 

PDEN20-6 20°C 0.8200 100 mL 

PDEN20-7 20°C 0.8230 100 mL 

PDEN20-8 20°C 0.8290 100 mL 

PDEN20-9 20°C 0.8510 100 mL 

PDEN20-10 20°C 0.8540 100 mL 

PDEN20-11 20°C 0.8580 100 mL 

PDEN20-12 20°C 0.8640 100 mL 

PDEN20-13 20°C 0.8660 100 mL 

PDEN20-14 20°C 0.8710 100 mL 

PDEN20-15 20°C 0.8720 100 mL 

PDEN25K1 25°C 0.7990, 0.8270, 0.8690 3 x 100 mL 

PDEN25-1* 25°C 0.6620 100 mL 

PDEN25-2* 25°C 0.7320 100 mL 

PDEN25-3 25°C 0.7720 100 mL 

PDEN25-4 25°C 0.7980 100 mL 

PDEN25-5 25°C 0.8080 100 mL 

PDEN25-6 25°C 0.8170 100 mL 

PDEN25-7 25°C 0.8190 100 mL 

PDEN25-8 25°C 0.8260 100 mL 

PDEN25-9 25°C 0.8480 100 mL 

PDEN25-10 25°C 0.8510 100 mL 

PDEN25-11 25°C 0.8550 100 mL 

PDEN25-12 25°C 0.8610 100 mL 

PDEN25-13 25°C 0.8630 100 mL 

PDEN25-14 25°C 0.8670 100 mL 

PDEN25-15 25°C 0.8690 100 mL 

PDEN40K1 40°C 0.7880, 0.8170, 0.8600 3 x 100 mL 

PDEN40-1 40°C 0.6490 100 mL 

PDEN40-2* 40°C 0.7200 100 mL 

PDEN40-3* 40°C 0.7600 100 mL 

PDEN40-4 40°C 0.7870 100 mL 

PDEN40-5 40°C 0.7970 100 mL 

PDEN40-6 40°C 0.8070 100 mL 

PDEN40-7 40°C 0.8090 100 mL 

Density standards 





sales@tamson.com

42 

Reference Temperature Nominal certified value g/mL Package Size 

number 

PDEN40-8 40°C 0.8160 100 mL 

PDEN40-9 40°C 0.8360 100 mL 

PDEN40-10 40°C 0.8410 100 mL 

PDEN40-11 40°C 0.8460 100 mL 

PDEN40-12 40°C 0.8520 100 mL 

PDEN40-13 40°C 0.8540 100 mL 

PDEN40-14 40°C 0.8580 100 mL 

PDEN40-15 40°C 0.8600 100 mL 

PDEN50K1 50°C 0.7810, 0.8100, 0.8540 3 x 100 mL 

PDEN50-1 50°C 0.7530 100 mL 

PDEN50-2 50°C 0.7800 100 mL 

PDEN50-3* 50°C 0.7900 100 mL 

PDEN50-4 50°C 0.8000 100 mL 

PDEN50-5 50°C 0.8030 100 mL 

PDEN50-6 50°C 0.8100 100 mL 

PDEN50-7 50°C 0.8320 100 mL 

PDEN50-8 50°C 0.8350 100 mL 

PDEN50-9 50°C 0.8390 100 mL 

PDEN50-10 50°C 0.8450 100 mL 

PDEN50-11 50°C 0.8460 100 mL 

PDEN50-12 50°C 0.8520 100 mL 

PDEN50-13 50°C 0.8540 100 mL 

PDEN60K1 60°C 0.7960, 0.8330, 0.8600 3 x 100 mL 

PDEN60-1 60°C 0.7960 100 mL 

PDEN60-2 60°C 0.8250 100 mL 

PDEN60-3 60°C 0.8280 100 mL 

PDEN60-4 60°C 0.8330 100 mL 

PDEN60-5 60°C 0.8390 100 mL 

PDEN60-6 60°C 0.8420 100 mL 

PDEN60-7 60°C 0.8460 100 mL 

PDEN60-8 60°C 0.8490 100 mL 

PDEN60-9 60°C 0.8510 100 mL 

PDEN60-10 60°C 0.8530 100 mL 

PDEN60-11 60°C 0.8600 100 mL 

PDEN80K1 80°C 0.7720, 0.8120, 0.8350 3 x 100 mL 

PDEN80-1 80°C 0.7700 100 mL 

PDEN80-2 80°C 0.7830 100 mL 

PDEN80-3 80°C 0.8120 100 mL 

PDEN80-4 80°C 0.8160 100 mL 

PDEN80-5 80°C 0.8200 100 mL 

PDEN80-6 80°C 0.8270 100 mL 

PDEN80-7 80°C 0.8300 100 mL 

PDEN80-8 80°C 0.8350 100 mL 

PDEN100K1 100°C 0.7750, 0.8030, 0.8250 3 x 100 mL 

PDEN100-1 100°C 0.7550 100 mL 

PDEN100-2 100°C 0.7660 100 mL 

PDEN100-3 100°C 0.7690 100 mL 

PDEN100-4 100°C 0.7770 100 mL 

PDEN100-5 100°C 0.7990 100 mL 

PDEN100-6 100°C 0.8030 100 mL 

PDEN100-7 100°C 0.8080 100 mL 

PDEN100-8 100°C 0.8140 100 mL 

PDEN100-9 100°C 0.8180 100 mL 

PDEN100-10 100°C 0.8230 100 mL 

PDEN100-11 100°C 0.8240 100 mL 

PDEN150K1 150°C 0.7208, 0.7820, 0.8291 3 x 100 mL 

PDEN150-1 150°C 0.7208 100 mL 

PDEN150-2 150°C 0.7398 100 mL 

PDEN150-3 150°C 0.7677 100 mL 

PDEN150-4 150°C 0.7820 100 mL 

PDEN150-5 150°C 0.7873 100 mL 

PDEN150-6 150°C 0.7925 100 mL 

PDEN150-7 150°C 0.8006 100 mL 

PDEN150-8 150°C 0.8101 100 mL 

PDEN150-9 150°C 0.8199 100 mL 

PDEN150-10 150°C 0.8289 100 mL 






sales@tamson.com

43 

Flash Point Standards 

ASTM D 92 & ASTM D93 

APPLICATION 

ISO 17025 / ISO Guide 34 certified PMCC Flash Point Standards are tested and certified in accordance with 

ASTM D93 ‘Standard Test Method for Flash Point by Pensky Martens Closed Cup Tester – Procedure A’. 

Procedure A is applicable to distillate fuels – diesels, bio-diesel blends, kerosene, heating oil, turbine fuels and 

lubricating oils. ISO 17025 / ISO Guide 34 certified COC Flash Point Standards are tested and certified in 

accordance with ASTM D92 ‘Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. 

These UKAS certified standards are specifically designed to be used for regular instrument performance checks. 

Packed uniquely in 3 x 80ml ‘single shot’ bottles assuring the highest level of sample integrity. An economical, 

time saving addition to any laboratory concerned with the generation of valid analytical test data. 

Typically used in, but not limited to, the analysis of petroleum products with flash points above 40°C (COO) or 

79°C (PMCC) and below 360°C. 


UKAS certified to ISO 17025. 


Manufactured in accordance with ASTM D 92 or ASTM D 93(a). 

Ensures full compliance to ASTM and IP test method protocols. 


Packaged in 3 X 80mL bottles - 'One shot', one bottle per test 

ensures zero contamination / high end volatile loss. 


Supplied with MSDS. 

Flashpoint standards 

Secondary working Flash Point Standards 

FP-COC-1 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 85.0°C 3 X 80mL 

FP-COC-6 Cleveland Open Cup Flash Point ASTM D92 Hydrocarbon 112°C 3 x 80mL 

FP-COC-3 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 149°C 3 x 80mL 

FP-COC-4 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 193 °C 3 x 80mL 

FP-COC-5 Cleveland Open Cup Flash Point ASTM D 92 Hydrocarbon 257 °C 3 x 80mL 

FP-PMCC-1* Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 56.5°C 3 x 80mL 

FP-PMCC-2 Pensky Martens Flash Point ASTM D 93 Proc. A Hydrocarbon 76.5°C 3 x 80mL 







Primary level CRM Flash Point Standards 

Tamson supplies the World’s first Primary level CRM Flash Point Standards which are dual certified under UKAS. 

These six new Primary level Certified Reference Materials are certified for Flash Point in full accordance with the 

requirements of ASTM D 92 (Cleveland Open Flash Point) or ASTM D 93 (Pensky-Martens Closed Cup Flash 

Point). They are certified in accordance with UKAS accreditation to ISO 17025 / ISO Guide 34 by means of a 

method specific inter-laboratory study. These CRM’s are intended to be used at least once a year for 

instrument and/or method verification in accordance with ASTM D 92 or ASTM D 93. 

CRM-COC-LOW Cleveland Open Cup Flash Point ASTM D 92 Mineral Oil 85.0°C 3 X 80mL 

CRM-COC-MID Cleveland Open Cup Flash Point ASTM D92 Mineral Oil 153°C 3 x 80mL 

CRM-COC-HIGH Cleveland Open Cup Flash Point ASTM D 92 Mineral Oil 262°C 3 x 80mL 

CRM-PMCC-LOW Pensky Martens Flash Point ASTM D 93 Mineral Oil 77°C 3 x 80mL 

CRM-PMCC-MID Pensky Martens Flash Point ASTM D 93 Mineral Oil 141°C 3 x 80mL 

CRM-PMCC-HIGH Pensky Martens Flash Point ASTM D 93 Mineral Oil 228°C 3 x 80mL 





sales@tamson.com

44 

CERTIFIED REFERENCE MATERIALS 

APPLICATION 

For the calibration and verification of laboratory instruments used in testing petroleum and 

derivative products. 


Manufactured in accordance with ASTM / EN or IP test methods. 

Certified by Round Robin Method by independent test laboratories. 

Ensures good interlaboratory correlation. 

Supplied in tamper evident UN compliant security pack. 

Pack size 250mL. 

12 months shelf life. 

The items are classified as hazardous and are subject to additional carriage charges. 

CRM standards 

Reference 

number 

Parameter Test method Product Nature Certified RI Value Package 

Size 

CRM-CFGO 

Cold Filter Plugging 

Point 

ASTM D 6371 - EN 116 - IP 309 Diesel -19.3°C 250mL 

CRM-CPGO Cloud Point Standard ASTM D 2500 Diesel -6.5°C 250mL 

CRM-DEGA 

Density 

Gasoline 

ASTM D 4052; ISO 12185 

(Unleaded) 

0.7376 g/mL @ 15°C 250mL 

CRM-DEGO Density ASTM D 4052; ISO 12185 Diesel 0.82998/mL @ 15 °C 250mL 

CRM-DEKR Density ASTM D 4052; ISO 12185 Jet Aviation Fuel 0.7951/mL @ 15°C 250mL 

CRM-DELU Density ASTM D 4052; ISO 12185 Lubricant 0.8837 g/mL @ 15°C 250mL 

CRM-DIGO Distillation ASTM D 86 Diesel 163°C - 357°C 250mL 

CRM-DIGA 

Distillation 

Gasoline 

ASTM D 86 

(Unleaded) 

30°C - 184°C 250mL 

CRM-DIKR Distillation ASTM D 86 Jet Aviation Fuel 151°C - 255°C 250mL 

CRM-SUGO-MID 

Element / Chemical 

Standards 

ASTM D 5453, ISO 20846 Diesel 48 mg/kg 50mL 

CRM-SUGO-HIGH 


Standards 

ASTM D 5453, ISO 20846 Diesel 309 mg/kg 50mL 

CRM-SUGO-LOW 


Standards 

ASTM D 5453, ISO 20846 Diesel 7.2 mg/kg 50mL 

CRM-SUKR 


Standards 

ASTM D 3227-ISO 3012 Kerosene 25.75 mg/kg 50mL 

CRM-ABKR Flash Point Standards IP 170 Jet Aviation Fuel 40.8°C 250mL 

CRM-FCLU Flash Point Standards ASTM D 92 Lubricant 265°C 250mL 

CRM-PMGO Flash Point Standards ASTM D 93 Diesel 57.3°C 250mL 

CRM-PMLU Flash Point Standards ASTM D 93 Lubricant 198.1°C 250mL 

CRM-TAKR Flash Point Standards ASTM D 56 Jet Aviation Fuel 43.3°C 250mL 

CRM-BEGA 

Fuels Testing Standards 

Gasoline 

ASTM D 4053 and D 5580 

(Unleaded) 

0.827% Vol. 250mL 

CRM-ADKR Fuels Testing Standards Acidity ASTM D 3242 Kerosene 0.0023 mg KOH/g 250mL 

CRM-FIKR Fuels Testing Standards FIA Aromatics ASTM D 1319 Kerosene 14.67 % 250mL 

CRM-ACGA Fuels Testing Standards Aromatics Content ASTM D 

5580 

Gasoline 28.25% 250mL 

CRM-CNGO Fuels Testing Standards ASTM D 613 Diesel 52.3 1000mL 

CRM-OMGA 


Gasoline 

ASTM D 2700 

(Unleaded) 

87.4 1000mL 

CRM-ORGA 


Gasoline 

ASTM D 2699 

(Unleaded) 

98.3 1000mL 

CRM-VPGA 

Fuels Testing Standards ASTM D 4953A, D 323A, 

EN13016-1 

Gasoline 82.6 kPa 250mL 

CRM-FRKR Freezing Point ASTM D 2386 Jet Aviation fuel -51.4°C 250mL 

CRM-APKR Physical Properties ASTM D 611 Jet Aviation fuel 59.82°C 250mL 

CRM-PPGO Pour Point ASTM D 97 Diesel -30.6°C 250mL 

CRM-PPLU Pour Point ASTM D 97, NFT 60-105 Lubricant -8.5°C 250mL 





sales@tamson.com

45 

HIGH TEMPERATURES THERMOSTATS 

Tamson Bracket 

SCOPE 

A heating immersion circulator is available for various bath tanks up to a capacity of 50 litres and come 

equipped with a mounting bridge that fits onto all tanks with a maximum opening of 422 mm. 

Model TB 


APPLICATION 

The Tamson Bracket is based on the Tamson Thermostatic Unit (TTU) and can be used for heating or/and 

circulating purposes. The bath fluid is heated via a microprocessor controlled heating element. The bracket can 

be placed on a tank. The width of the bracket can be adjusted between 186 and 422 mm. 


The set point of the TB can be set in steps of 0.1°C in the range of 0°C up to 200°C (32..392°F). The accuracy 

on the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C. Two decimal 

readout also is available via the RS232 and the free Tamcom software. Due to the "self heating" of the stirring 

mechanism, the minimum temperature lies approximately 5K above the ambient temperature. 

Range 

..200°C/..392°F 

Reading 



Setting ± 

0.1°C 


Heating 

1100 W 

Bath volume 

Max 50 L 

Width bracket 

> 186 mm < 422 mm 

Depth bath 

> 160 mm 

Pump (mBar) Max pressure 250 

Pump (L/min) Max flow 7.5 

Dimension 

350 x 213 x 440 mm (LxWxH) 

Weight 

4 kg 

TB 

OPTIONS 

REF 02T3025 RS232 serial communication 

REF 25T0253 Boost heater 1550 W 


REF 25T1343 Motor capacitor 

REF 25T1295 Pump-motor 

REF 25T0251 Heater element 1100 W 

REF 25T2310 PT100 sensor 

REF 06T0496 PCB (Specify mains voltage when ordering)! 


REF 24T8546 Mains switch protective cover 

REF 28T3902 Front foil TTU-B 

REF 24T8581 Over-temperature protection 

REF 28T3022 K1S controller 





sales@tamson.com

46 

Circulators and Water / Oil Baths “TCXXB” Line 

SCOPE 

Circulators offer many application possibilities, e.g. routine laboratory applications, temperature control of 

samples, incubations, dental applications, material testing, corrosion tests, tempering of cultures as well as 

temperature testing of food and luxury articles. 

Model TC6B 


ASTM D 1160 

APPLICATION 

The “TCXXB” baths can be used as circulator or as a water/oil bath. The TC6B can be used in ASTM D 1160 

applications. 


The set point of the TC6B can be set in steps of 0.1° in the range from 0°C up to 200°C (32..392°F). The 

accuracy on the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C. Two 

decimal readout also is available via the RS232 and the free Tamcom software. Due to the "self heating" of the 

stirring mechanism and when using a top lid, the minimum temperature lies approximately 5K above the 

ambient temperature. When using the standard built-in cooling coil the minimum operating temperature lies 

approximately ± 5K above the temperature of the cooling liquid. In general the minimum temperature lies 

around 10°C. Lower temperatures generate problems with built up of condensate in the inner insulation of the 

bath. 

Range 

..200°C/..392°F 

Reading 



Setting ± 

0.1°C 


Heating 

1100 W 

Bath volume 

6 L 

Opening bath 

148 * 120 mm 

Depth bath 

170 mm 


Pump (L/min) Max flow 7 

Dimension 

350 x 213 x 440 mm (LxWxH) 

Weight 

8 kg 

TC6B 

OPTIONS 



REF 00T0050 TLC10-3 external cooler 230V/50 Hz 







REF 25T2310 Sensor PT100 

REF 06T0496 PCB Specify mains voltage when ordering! 


REF 24T8546 Mains switch protective cover 




TC6B with levelling platform 





sales@tamson.com

47 

Model TC10B 


APPLICATION 

The “TCXXB” baths can be used as circulator or as a water/oil bath. 


The set point of the TC10B can be set in steps of 0.1° in the range from 0°C up to 200°C(32..392°F). The 







bath. 

Range 

..200°C/..392°F 

Reading 



Setting ± 

0.1°C 


Heating 

1100 W 

Bath volume 

10 L 

Opening bath 

185 * 200 mm 

Depth bath 

150 mm 



Dimension 

440 x 250 x 440 mm (LxWxH) 

Weight 

11 kg 

TC10B 

OPTIONS 





















sales@tamson.com

48 

Model TC20B 


APPLICATION 

The “TCXXB” baths can be used as circulator or as a water/oil bath. 


The set point of the TC20B can be set in steps of 0.1° in the range from 0°C up to 200°C (32..392°F). The 







bath. 

Range 

..200°C/..392°F 

Reading 



Setting ± 

0.1°C 


Heating 

1550 W 

Bath volume 

20 L 

Opening bath 

300 * 320 mm 

Depth bath 

150 mm 



Dimension 

555 x 375 x 425 mm (LxWxH) 

Weight 

13 kg 

TC20B 

OPTIONS 


REF 03T0031 Levelling platform + top lid 



















sales@tamson.com

49 

Circulators and Water / Oil Baths “TCXX” Line 

SCOPE 

The working temperature range offers many application possibilities, e.g. routine laboratory applications, 

temperature control of samples, incubations, dental applications, material testing, corrosion tests, tempering of 

cultures as well as temperature testing of food and luxury articles. 

Model TC16 


APPLICATION 

The “TCXX” baths are used for precise temperature control. The TC16 can be used as circulator or/and 

water/oil bath. The TC16 can be used for ASTM D70 purposes together with pycnometers. 


The insulation of the bath and electronic design result in a very stable working temperature of ±0.02K for the 

TC16. The set point can be set in steps of 0.1° in the range from 0°C up to 250°C (32..482°F). The accuracy on 

the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C. Two decimal 


mechanism and when using a top lid, the minimum temperature lies approximately 5K above the ambient 

temperature. When using the standard built-in cooling coil the minimum operating temperature lies 



bath. 

Range 

Reading 


Setting ± 

..250°C/..482°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

1200 W 

16 L 

180 * 210 mm 

Depth bath 

200 mm 

Pump (mBar) 

Max pressure 300 (optional 1 

mBar) 

Pump (L/min) Max flow 7.5 (optional 16) 

Dimension 

Weight 

455 x 295 x 440 mm (LxWxH) 

21 kg 

OPTIONS 



REF 00T0253 Suction/pressure pump 

REF 24T0392 Performance pump (16 L/min) 

REF 25T0190 Additional boost heater (1500W) 

REF 07T0160 Levelling platform TC16 

REF 00T0254 Top lid cover with 1 sets of 9 rings 

REF 00T0050 TLC10-3 external cooler 230V/50 Hz, REF 00T0051 230V/60 Hz, REF 00T0052 115V/60 Hz 

On request Remote PT100 


REF 25T1242 Fan 

REF 04T0035 Pump complete 

REF 24T8080 Motor fuse 


REF 06T0496 PCB TC series 

REF 25T0170 Heater 200/1000 W 

REF 28T4106 Keypad foil 

REF 28T3022 Controller PCB 115V & 230V (not programmed, when ordering always specify bath (i.e. TC16) 

TC16 





sales@tamson.com

50 

Model TC40 


APPLICATION 

The “TCXX” baths are used for precise temperature control. The TC40 can be used as circulator or/and 

water/oil bath. 










bath. 

Range 

Reading 


Setting ± 

..250°C/..482°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

2700 W 

40 L 

420 * 275 mm 

Depth bath 

200 mm 

Pump (mBar) 


Bar) 


Dimension 

Weight 

705 x 375 x 440 mm (LxWxH) 

30 kg 

OPTIONS 


REF 03T2270 Lid Levelling platform 

REF 03T3200 Gabled lid 

REF 03T2210 Gabled lid + levelling platform 











TC40 

Gabled lid, Top lid 6 x 6 rings, 

Top lid 2 x 9 rings, Levelling platform 







REF 25T0170 Heater 200/1000 W 


REF 28T4108 Front foil TC40 

REF 24T8581 Safety thermostat 






sales@tamson.com

51 

Model TC58 


APPLICATION 

The TC58 baths are used for precise temperature control. The TC58 can be used as circulator or/and water/oil 

bath. 










bath. 

Range 

Reading 


Setting ± 

..250°C/..482°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

2700 W 

58 L 

420 * 275 mm 

Depth bath 

300 mm 

Pump (mBar) 


Bar) 


Dimension 

Weight 

705 x 375 x 590 mm (LxWxH) 

30 kg 

OPTIONS 


REF 03T2270 Lid Levelling platform 

REF 03T3200 Gabled lid 

REF 03T2210 Gabled lid + levelling platform 




















REF 25T0170 Heater 200/1000 W 



REF 24T8581 Safety thermostat 


TC58 

Levelling platform, Top lid 2 x 9 rings, 

Top lid 6 x 6 rings, Gabled lid. 





sales@tamson.com

52 

HEATING ACCESSORIES 

Baths Fluids for Viscosity Baths and High Temperature 

Thermostats 

APPLICATION 

To replace water as a bath fluid. Viscosity, volatility and other properties that 

change with temperature affect the performance of fluids in controlled baths and 

circulators. Tamson has tested and used each of the fluids we sell. Over the ranges 

recommended in the following table, each fluid remains at a low enough viscosity to 

be adequately pumped or stirred. Whether your application is industrial or critical 

lab calibration work, Tamson fluids give you top performance and stability. 

Tamson T150 


Type 

Remarks 

Mineral T150 

Yellow 

Mineral oil 

Silicon 200 -10 

Transparent 

Dimethyl 

siloxane 

polymer 

Silicon 200 -50 

Transparent 

Dimethyl 

siloxane 

polymer 

Silicon Silicon 210 

Dark 

Dimethyl poly 

siloxane 

Silicon Silicon 550 

Colourless 

Polyphenyl 

methyl 

dimethyl 

siloxane 

Life 

Viscosity [cSt] X 

Temp. Package 

150°C 200°C 250°C 80°C 100°C 150°C 200°C Range 

1/2 yr X X 3 2.2 1.8 80..150°C 20 ltrs 

No 

limit 

No 

limit 

No 

limit 

No 

limit 

200hrs

53 

Safe Tubing for High Temperature Circulators 

APPLICATION 

To replace unsafe tubing to circulate fluids at high temperatures. 


Temperature range ambient.. +250°C/+482°C. 

Complete stainless steel 316 quality. 

Flexible. 

Chemical resistant. 

Standard threads (1/4” and 3/8” straight internal, 

flat seal) 

Corrugated, not insulated 

Ambient .. +250°C/+482°F 

REFERENCES 

Corrugated (NON braided) 

REFERENCES Length 

[mtr]* 

Fitting 

[inch]** 

Pressure 

[bar] 

Bending 

(inner) 

radius 

Description 

12T1002 1 ¼” 10 16[mm] Not insulated 

12T1003 2 ¼” 10 16[mm] Not insulated 

12T1004 1 3/8” 5,5 22[mm] Not insulated 

12T1005 2 3/8” 5,5 22[mm] Not insulated 

* Other lengths on request. 

** Both sides, internal straight, flat seal. 

OPTIONS 

REFERENCES Description (all stainless steel) Dimensions 

23T0078 Male male nipple g1/4o x g1/4o 


23T0075 T-connector 3x g1/4i 

23T0079 Male male nipple R1/4o x R1/4o 



23T0023 T-valve 3x g3/8i 

23T0073 Female female socket g1/4ix g1/4i 


23T0082 Reducing bush g1/4ix g3/8o 

23T0084 Washer fiber for g1/4 (diameter hole=1/4”) 


23T0086 Washer fiber outer dimension 1/4" 


Foam insulation, adhesive tape on request 

i = Inner thread. 

o = Outer thread. 

g = British Standard Pipe – straight (not conical). 

R = BSP conical. 





sales@tamson.com

54 

LOW TEMPERATURE THERMOSTATS 

Cooling Circulators “TLC” Line 

Model TLC10-3 

REF 00T0050 (230V/50Hz), REF 00T0051 (230ZV/60Hz), REF 00T0052 (115V/60Hz) 

APPLICATION 

The TLC10-3 has been developed to be used as a general purpose circulator and this apparatus can be used in 

various applications where cooling is needed. Experiments, refractometers, rotary evaporators, distillation 

units, water baths, viscosity, flashpoint testers all are applications for which the TLC10-3 can be used. 


The apparatus holds a small bath containing 3.5 litres and the filling opening measures 40 x 120 mm. Due to 

its special design the system is extremely quiet, compact and saves costly laboratory space. Readout is in 

degrees °C or in °F. The bath comes standard with RS232 communication and when using the free software 

tool Tamcom, it provides temperature logging or a predefined temperature set point curve. A pump provides 

circulation in the bath or via an external circuit. The pump offers 7 litres per minute with a maximum counter 

pressure of 300 mBar. 

Range 

-10..60°C*/ 14..140°F 

Reading 



Setting ± 

0.01°C 

Stability ± Better than 0.1K 

Heating 

1100 W 

Bath volume 

3.5 L 

Opening bath 

40 * 120 mm 

Depth bath 

150 mm 



Dimension 

360 x 228 x 552 mm (LxWxH) 

Weight 

18 kg 

*On request the TLC10-3 can have a working range from -10 .. 100°C. 

TLC10-3 

OPTIONS 

On request 

Remote PT100 

MAIN SPARE PARTS 230V/50Hz (230V/60Hz and 115V/60Hz ON REQUEST) 

25T1295 Motor for pump 

25T1343 Capacitor 2uF 

25T1244 Fan 120 x38 mm (Condenser unit) 

25T0251 Heater 1100 W 

24T8081 Motor fuse 0.3 Amp. 

04T1001 Coupling flexible motor axis 

24T8581 Mechanical safety thermostat 

04T2135 Bearing PTFE 

24T8545 Mains switch 

25T2310 PT-100 sensor 

06T0512 Power board PCB (Back panel) 

25T1243 Fan 60x60x25 12VDC (Top compartment) 

06T0500 Microcontroller PCB 

06T0502 Display PCB 





sales@tamson.com

55 

Model TLC15-5 


APPLICATION 



units, water baths, viscosity, flashpoint testers all are applications for which the TLC15-5 can be used. 


The apparatus holds a small bath containing 5 litres and the filling opening measures 85 x 150 mm. Due to its 

special design the system is extremely quiet, compact and saves costly laboratory space. Readout is in degrees 

°C or in °F. A pump provides circulation in the bath or via an external circuit. The pump offers 7 litres per 

minute with a maximum counter pressure of 300 mBar. 

Range 

-15..60°C*/ -5..140°F 

Reading 



Setting ± 

0.01°C 


Heating 

1100 W 

Bath volume 

5 L 

Opening bath 

85 * 150 mm 

Depth bath 

150 mm 



Dimension 

420 x 265 x 565 mm (LxWxH) 

Weight 

30 kg 


TLC15-5 

OPTIONS 





25T1343 Capacitor 2 uF 

25T0251 Heater 1100 W 


06T0514 Print power TLC-TMC70 




06T0513 Print TLC-TMC70 uP-Display 





sales@tamson.com

56 

Model TLC30-5 


APPLICATION 



units, foaming tests, ductility tests, flashpoint testers all are applications for which the TLC30-5 can be used. 


The apparatus holds a small bath containing 5 litres and the filling opening measures 85 x 150 mm. Due to its 




Range 

-30..60°C*/ -5..140°F 

Reading 



Setting ± 

0.01°C 


Heating 

1100 W 

Bath volume 

5 L 

Opening bath 

85 * 140 mm 

Depth bath 

150 mm 



Dimension 

420 x 265 x 565 mm (LxWxH) 

Weight 

30 kg 


TLC30-5 

OPTIONS 






25T0251 Heater 1100 W 


06T0514 Print power TLC-TMC70 




06T0513 Print TLC-TMC70 uP-Display 





sales@tamson.com

57 

Model TLC40-14 


APPLICATION 

This type of cooling circulator can be used for multiple heat removal purposes such as replacement of tap 

water, fast cool down, flashpoint, distillation, density or Cloud and Pour Point testing. The unit also can be used 

to cool down water baths and viscosity baths which have a large bath volume. 


The apparatus holds a bath containing 14 litres and the filling opening measures 240 x 170 mm. Due to its 




Range 

Reading 


Setting ± 

-40 .. +20°C*/ -40..+68°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

1550 W 

14..15 L 

240 * 170 mm 

Depth bath 

150 mm 

Pump (mBar) 

Max pressure 300 (Optional 1 

bar) 

Pump (L/min) Max flow 7 (Optional 16) 

Dimension 

810 x 460 x 770 mm (LxWxH) 

Weight 

65 kg 

*On request the TLC40-14 can have an optional working range from -45 .. +20°C. 

TLC40-14 

OPTIONS 



REF 06T0035 Manifold 


MAIN SPARE PARTS 230V/50-60Hz (230V/60Hz and 115V/60Hz ON REQUEST) 



25T0253 Heater 1550 W 


06T0475 Mains board with filter and relay (PCB TTU) 




28T3022 K1S controller 





sales@tamson.com

58 


REF 00T0530 (230V/50Hz), REF 00T0532 (230ZV/60Hz), REF 00T0535 (115V/60Hz) ON REQUEST 

APPLICATION 

The bath can be used for general low temperature use but shows excellent heat removal performance i.e. 

combination with Cloud and Pour Point tests, Cold Filter Plugging Point tests and Pour Point tests. 



special design the system is extremely quiet. The minimum temperature which can be reached is minus 80°C. 

At -80°C the heat removal capacity is 50 Watts. Readout is in degrees °C or in °F. A pump provides circulation 

in the bath or via an external circuit. The pump offers 7 litres per minute with a maximum counter pressure of 

300 mBar. 

Range 

Reading 


Setting ± 

-80 .. +20°C/ -112..+68°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

1550 W 

14..15 L 

240 * 170 mm 

Depth bath 

150 mm 

Pump (mBar) 


bar) 


Dimension 

Weight 

810 x 460 x 770 mm (LxWxH) 

80 kg 

TLC80-14 

OPTIONS 








25T0253 Heater 1550 W 











sales@tamson.com

59 

Model TLC80-14DP 

REF 00T0540 (230V/50Hz) 

APPLICATION 






At this low temperature the heat removal capacity lies around 150 watts. The TLC80-14DP is especially 

developed to cool down several instruments in a row. The manifold can be used for this purpose. Readout is in 

degrees °C or in °F. A pump provides circulation in the bath or via an external circuit. The pump offers 7 litres 

per minute with a maximum counter pressure of 300 mBar. A single switch can turn the apparatus into 

economy mode when the full cooling capacity is not needed (e.g. during the night). 

Range 

Reading 


Setting ± 

-82 .. +20°C/ -112 ..+68°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

1550 W 

14..15 L 

240 * 170 mm 

Depth bath 

150 mm 

Pump (mBar) 

Max pressure 300 (Optional 

1Mbar) 


Dimension 

810 x 490 x 1150 mm 

(LxWxH) 

Weight 

140 kg 

TLC80-14DP 

OPTIONS 





MAIN SPARE PARTS 230V/50Hz 



25T0253 Heater 1550 W 











sales@tamson.com

60 


REF 00T0580 (230V/50Hz), REF 00T0585 (230ZV/60Hz), REF 00T0590 (115V/60Hz) ON REQUEST 

APPLICATION 






Readout is in degrees °C or in °F. A pump provides circulation in the bath or via an external circuit. The pump 

offers 7 litres per minute with a maximum counter pressure of 300 mBar. 

Range 

Reading 


Setting ± 

-90 .. +20°C/ -130..+68°F 



0.1°C 


Heating 

Bath volume 

Opening bath 

1550 W 

14..15 L 

240 * 170 mm 

Depth bath 

150 mm 

Pump (mBar) 


bar) 


Dimension 

Weight 

810 x 460 x 770 mm (LxWxH) 

80 kg 

TLC80-14 

OPTIONS 








25T0253 Heater 1550 W 











sales@tamson.com

61 

Immersion Coolers / Cold Fingers 

Model KV40 

REF 00T0212 (230V/50Hz), REF 00T212A (230V/60Hz), REF 00T0259 (115V/60Hz) 

APPLICATION 

The Tamson KV40 is a portable, compact immersion cooler that provides fast, continuous cooling down to 

–40°C. It can be used in conjunction with an immersion heating circulator if temperature control is necessary. 

The KV40 provides efficient cooling capacity and it eliminates constant cold trap hassles and the need for 

chemical refrigerants such as dry ice and acetone mixtures. 

Applications: 

• Rotary evaporator cold-trap condensers. 

• Cooling open reservoirs. 

• Vapour trapping. 

• Solvent trapping. 

• Impact testing. 

• Tamson TLV25. 

• Tamson circulators / water baths. 

• Replacement of Tap water. 


The KV40 is designed for heat extraction from fluid in viscometer baths. The combination of the KV40 and the 

low temperature viscosity bath TLV25, allows stable viscosity measurements at low temperatures down to 

minus 30 degrees centigrade. Temperature stability of the TLV25 + KV40 combination supersedes ASTM D445 

requirements. The cooling probe of the system is formed by a nickel plated cupper coil at the top of a flexible 

hose. This probe can be immersed in fluid which has to be cooled down. The KV40 can be switched off via its 

main switch on the side panel. 

KV40 

Minimum Probe temp 

Body 

Hose Length 

Probe Length 

Probe diameter 

Dimension 

Weight 

Power 

-40°C/ -40°F 

Steel, PET 

2500 mm 

190 mm 

47 mm 

390 x 310 x 360 mm (LxWxH) 

25 kg 

600 Watt 


REF 28T8010 Cold finger with 2500 mm hose 





sales@tamson.com

62 

Model KV80 

REF 00T0216 (230V/50Hz), REF 00T216A (230V/60Hz), REF 00T0260 (115V/60Hz) 

APPLICATION 

The Tamson KV80 is a portable, compact immersion cooler that provides fast, continuous cooling down to 

-80°C. It can be used in conjunction with an immersion heating circulator if temperature control is necessary. 

The KV80 provides efficient cooling capacity and it eliminates constant cold trap hassles and the need for 

chemical refrigerants such as dry ice and acetone mixtures. 

Applications: 

• Rotary evaporator cold-trap condensers. 

• Cooling open reservoirs. 

• Vapour trapping. 

• Solvent trapping. 

• Impact testing. 

• Tamson TLV25. 

• Tamson circulators / water baths. 

• Replacement of Tap water. 

KV80 


The KV80 is designed for heat extraction from fluid in viscometer baths. The combination of the KV80 and the 

low temperature viscosity bath TLV25, allows stable viscosity measurements at low temperatures down to 

minus 80 degrees centigrade. Temperature stability of the TLV25 + KV80 combination supersedes ASTM D445 

requirements. The cooling probe of the system is formed by a nickel plated cupper coil at the top of a flexible 

hose. This probe can be immersed in fluid which has to be cooled down. The KV80 can be switched off via its 

main switch on the side panel. 

Minimum Probe temp 

Body 

Hose Length 

Probe Length 

Probe diameter 

Dimension 

Weight 

Power 

-80°C/ -112°F 

Stainless Steel, PET 

2500 mm 

190 mm 

47 mm 

560 x 450 x 500 mm (LxWxH) 

60 kg 

1200 Watt 


REF 28T8006 Fan-motor 

REF 28T8010 Cold finger with 2500 mm hose 





sales@tamson.com

63 

COOLING ACCESSORIES 

Manifold 

REF 00T0635 

APPLICATION 

To connect two or more devices to one cold flow of a Tamson circulator. 


The manifold unit can be mounted on the wall and uses manual valves connecting 

the analysers to the circulating cold flow. The manifold can be used to connect 2 

devices to a single low temperature circulator. The manifold can be set in series 

offering 4 devices to be connected to one cooling circulator. Its small dimensions, 

270 x 126 mm (WxH), makes it easy to mount and install. 

The manifold is well insulated. Tamson also provides low temperature insulated 

hoses to safely and easy connect the cold property apparatus. These hoses 

consist of a flexible stainless steel inner hose and are insulated with black 

armaflex covered with a protecting nylon sleeve. All connections are standard 

3/8" BSP. For interconnection to other threads, stainless steel adaptor pieces are available. 

Manifold 





sales@tamson.com

64 

Safe Tubing for Low Temperature Thermostats 

APPLICATION 

To replace unsafe tubing for circulation of fluids at low temperatures and to guarantee good stability. 


 

 

 

 

 

Temperature range from -100C (-148°F).. +150°C/+302°F. 

Complete stainless steel 316 quality. 

Flexible. 

Chemical resistant. 

Standard threads (1/4” and 3/8” straight internal, flat seal). 

Corrugated and insulated 

-100°C/-148°F .. +150°C/+302°F 

REFERENCES 

Corrugated (NON braided) 

REFERENCES Length 

[mtr]* 

Fitting 

[inch]** 

Pressure 

[bar] 

Bending 

(inner) 

radius 

Description 

12T1050 1 ¼” 10 40[mm] Insulated*** 

12T1051 2 ¼” 10 40[mm] Insulated*** 

12T1052 1 3/8” 5,5 50[mm] Insulated*** 

12T1053 2 3/8” 5,5 50[mm] Insulated*** 

* Other lengths on request. 

** Both sides, internal straight, flat seal. 

*** Insulation 13 mm thick with nylon sleeve. 

OPTIONS 

REFERENCES Description (all stainless steel) Dimensions 







23T0023 T-valve 3x g3/8i 



23T0082 Reducing bush g1/4ix g3/8o 





Foam insulation, adhesive tape on request 

i = Inner thread. 

o = Outer thread. 

g = British Standard Pipe – straight (not conical). 

R = BSP conical. 





sales@tamson.com

Tamson Catalogue - Andreescu Labor & Soft

Create successful ePaper yourself

Delete template?

Save as template?