Tamson Catalogue - Andreescu Labor & Soft

More documents

Recommendations

Info

44 CERTIFIED REFERENCE MATERIALS APPLICATION For the calibration and verification of laboratory instruments used in testing petroleum and derivative products. MAIN CHARACTERISTICS Manufactured in accordance with ASTM / EN or IP test methods. Certified by Round Robin Method by independent test laboratories. Ensures good interlaboratory correlation. Supplied in tamper evident UN compliant security pack. Pack size 250mL. 12 months shelf life. The items are classified as hazardous and are subject to additional carriage charges. CRM standards Reference number Parameter Test method Product Nature Certified RI Value Package Size CRM-CFGO Cold Filter Plugging Point ASTM D 6371 - EN 116 - IP 309 Diesel -19.3°C 250mL CRM-CPGO Cloud Point Standard ASTM D 2500 Diesel -6.5°C 250mL CRM-DEGA Density Gasoline ASTM D 4052; ISO 12185 (Unleaded) 0.7376 g/mL @ 15°C 250mL CRM-DEGO Density ASTM D 4052; ISO 12185 Diesel 0.82998/mL @ 15 °C 250mL CRM-DEKR Density ASTM D 4052; ISO 12185 Jet Aviation Fuel 0.7951/mL @ 15°C 250mL CRM-DELU Density ASTM D 4052; ISO 12185 Lubricant 0.8837 g/mL @ 15°C 250mL CRM-DIGO Distillation ASTM D 86 Diesel 163°C - 357°C 250mL CRM-DIGA Distillation Gasoline ASTM D 86 (Unleaded) 30°C - 184°C 250mL CRM-DIKR Distillation ASTM D 86 Jet Aviation Fuel 151°C - 255°C 250mL CRM-SUGO-MID Element / Chemical Standards ASTM D 5453, ISO 20846 Diesel 48 mg/kg 50mL CRM-SUGO-HIGH Element / Chemical Standards ASTM D 5453, ISO 20846 Diesel 309 mg/kg 50mL CRM-SUGO-LOW Element / Chemical Standards ASTM D 5453, ISO 20846 Diesel 7.2 mg/kg 50mL CRM-SUKR Element / Chemical Standards ASTM D 3227-ISO 3012 Kerosene 25.75 mg/kg 50mL CRM-ABKR Flash Point Standards IP 170 Jet Aviation Fuel 40.8°C 250mL CRM-FCLU Flash Point Standards ASTM D 92 Lubricant 265°C 250mL CRM-PMGO Flash Point Standards ASTM D 93 Diesel 57.3°C 250mL CRM-PMLU Flash Point Standards ASTM D 93 Lubricant 198.1°C 250mL CRM-TAKR Flash Point Standards ASTM D 56 Jet Aviation Fuel 43.3°C 250mL CRM-BEGA Fuels Testing Standards Gasoline ASTM D 4053 and D 5580 (Unleaded) 0.827% Vol. 250mL CRM-ADKR Fuels Testing Standards Acidity ASTM D 3242 Kerosene 0.0023 mg KOH/g 250mL CRM-FIKR Fuels Testing Standards FIA Aromatics ASTM D 1319 Kerosene 14.67 % 250mL CRM-ACGA Fuels Testing Standards Aromatics Content ASTM D 5580 Gasoline 28.25% 250mL CRM-CNGO Fuels Testing Standards ASTM D 613 Diesel 52.3 1000mL CRM-OMGA Fuels Testing Standards Gasoline ASTM D 2700 (Unleaded) 87.4 1000mL CRM-ORGA Fuels Testing Standards Gasoline ASTM D 2699 (Unleaded) 98.3 1000mL CRM-VPGA Fuels Testing Standards ASTM D 4953A, D 323A, EN13016-1 Gasoline 82.6 kPa 250mL CRM-FRKR Freezing Point ASTM D 2386 Jet Aviation fuel -51.4°C 250mL CRM-APKR Physical Properties ASTM D 611 Jet Aviation fuel 59.82°C 250mL CRM-PPGO Pour Point ASTM D 97 Diesel -30.6°C 250mL CRM-PPLU Pour Point ASTM D 97, NFT 60-105 Lubricant -8.5°C 250mL Tamson Instruments B.V. T. + 31 10 522 43 73 VAT: NL 80 66 34 984 B01 Van ’t Hoffstraat 12 F. + 31 10 521 19 41 Rabobank: 16 01 00 046 2665 JL BLEISWIJK www.tamson.com Chamber of Commerce: 271 69 541 The Netherlands sales@tamson.com
45 HIGH TEMPERATURES THERMOSTATS Tamson Bracket SCOPE A heating immersion circulator is available for various bath tanks up to a capacity of 50 litres and come equipped with a mounting bridge that fits onto all tanks with a maximum opening of 422 mm. Model TB REF 00T0380 (230V/50-60Hz), REF 00T0385 (115V/60Hz) APPLICATION The Tamson Bracket is based on the Tamson Thermostatic Unit (TTU) and can be used for heating or/and circulating purposes. The bath fluid is heated via a microprocessor controlled heating element. The bracket can be placed on a tank. The width of the bracket can be adjusted between 186 and 422 mm. MAIN CHARACTERISTICS The set point of the TB can be set in steps of 0.1°C in the range of 0°C up to 200°C (32..392°F). The accuracy on the display is displayed in 0.1°C. However the controller has an internal accuracy of 0.01°C. Two decimal readout also is available via the RS232 and the free Tamcom software. Due to the "self heating" of the stirring mechanism, the minimum temperature lies approximately 5K above the ambient temperature. Range ..200°C/..392°F Reading Standard °C, °F on request Used materials inside bath Stainless Steel 304, PTFE Setting ± 0.1°C Stability ± 0.03K Heating 1100 W Bath volume Max 50 L Width bracket > 186 mm < 422 mm Depth bath > 160 mm Pump (mBar) Max pressure 250 Pump (L/min) Max flow 7.5 Dimension 350 x 213 x 440 mm (LxWxH) Weight 4 kg TB OPTIONS REF 02T3025 RS232 serial communication REF 25T0253 Boost heater 1550 W MAIN SPARE PARTS 230V/50-60Hz (115V/60Hz ON REQUEST) REF 25T1343 Motor capacitor REF 25T1295 Pump-motor REF 25T0251 Heater element 1100 W REF 25T2310 PT100 sensor REF 06T0496 PCB (Specify mains voltage when ordering)! REF 24T8545 Mains switch REF 24T8546 Mains switch protective cover REF 28T3902 Front foil TTU-B REF 24T8581 Over-temperature protection REF 28T3022 K1S controller Tamson Instruments B.V. T. + 31 10 522 43 73 VAT: NL 80 66 34 984 B01 Van ’t Hoffstraat 12 F. + 31 10 521 19 41 Rabobank: 16 01 00 046 2665 JL BLEISWIJK www.tamson.com Chamber of Commerce: 271 69 541 The Netherlands sales@tamson.com
Page 1 and 2: Tamson Catalogue 2011 Tamson Instru
Page 3 and 4: 3 VISCOSITY Viscosity Baths for Mea
Page 5 and 6: 5 Model TV4000 REF 00T0720 (230V/50
Page 7 and 8: 7 Model TV12 REF 00T0400 (230V/50-6
Page 9 and 10: 9 CANNON-FENSKE ROUTINE AKV VISCOME
Page 11 and 12: 11 Viscosity Baths for Measurements
Page 13 and 14: 13 Model TV4000LT REF 00T0460 (230V
Page 15 and 16: 15 Model TLV25 REF 00T0650 (230V/50
Page 17 and 18: 17 Viscometers APPLICATION For the
Page 19 and 20: 19 VISCOMETER TUBES with calibratio
Page 21 and 22: 21 ASTM Thermometers APPLICATION Pr
Page 23 and 24: 23 ACCESSORIES To verify the perfor
Page 25 and 26: 25 THERMOMETER Tamson Thermometer 3
Page 27 and 28: 27 General Purpose Viscosity Refere
Page 29 and 30: 29 High Temperature Viscosity Stand
Page 31 and 32: 31 Cone and Plate Standards (CAP) A
Page 33 and 34: 33 Temperature Viscosity (nominal D
Page 35 and 36: 35 CERTIFIED MEASUREMENT & CALIBRAT
Page 37 and 38: 37 Lithium Chloride Electrolyte AST
Page 39 and 40: 39 Conductivity Standards APPLICATI
Page 41 and 42: 41 Density Standards ASTM D 1480 AP
Page 43: 43 Flash Point Standards ASTM D 92
Page 47 and 48: 47 Model TC10B REF 00T0150 (230V/50
Page 49 and 50: 49 Circulators and Water / Oil Bath
Page 51 and 52: 51 Model TC58 REF 00T0691 (230V/50-
Page 53 and 54: 53 Safe Tubing for High Temperature
Page 55 and 56: 55 Model TLC15-5 REF 00T0565 (230V/
Page 57 and 58: 57 Model TLC40-14 REF 00T0520 (230V
Page 59 and 60: 59 Model TLC80-14DP REF 00T0540 (23
Page 61 and 62: 61 Immersion Coolers / Cold Fingers
Page 63 and 64: 63 COOLING ACCESSORIES Manifold REF

Tamson Catalogue - Andreescu Labor & Soft

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?